Sennheiser evolution e608 User manual
e 608
Instruction manual
Stage Microphones
A
B
125 Hz
250 Hz
500 Hz
1,000 Hz
2,000 Hz
4,000 Hz
8,000 Hz
16,000 Hz
30°
0°
180°
150°
120°
60°
90°
0
5
10
15
20
25
dB
30°
0°
180°
150°
120°
60°
90°
- 50
- 60
- 70
- 80
- 90
- 40
dBV
0°, 1 m
0°, 5 cm
D
C
123
1
Important safety information
• Please read this instruction manual carefully and completely befo-
re using the product.
• Make this instruction manual easily accessible to all users at all
times.
• Always include this instruction manual when passing the product
on to third parties.
Before operation
• Never open the housing of the product. If products are opened by
customers in breach of this instruction, the warranty becomes null
and void.
• Only use attachments, accessories or spare parts specified by
Sennheiser.
During operation
• Liquids entering the product can short-circuit the electronics or
damage the mechanics. Keep all liquids away from the product.
• Solvents or cleansing agents can damage the surface of the
product. Only use a soft, slightly damp cloth to clean the product.
• Do not expose the product to extreme temperatures.
After operation
• Handle the product with care and store it in a clean, dust-free
environment.
Intended use
Intended use includes:
• having read this instruction manual, especially the chapter
“Important safety information”,
• using the product within the operating conditions and limitations
described in this instruction manual.
“Improper use” means using the product other than as described in
this instruction manual, or under operating conditions which differ
from those described herein.
2
The e 608
The super-cardioid e 608 is a dynamic microphone ideal for almost
invisible clip-miking of drums, percussions, brass and woodwind
(except certain flutes). The goose-neck mounting enables the capsule
to be positioned close to the signal source for high realism and high-
level output.
Extensive damping and shock mounting isolates the capsule and signal
from extraneous vibrations, impact and handling noise. The humbuck-
ing coil protects against electromagnetic interference.
Features
• Dynamic microphone with goose neck
• Resistant to impact noise thanks to the shock mount
• Highly resilient fiberglass housing with tear-proof cable (XLR-
Connector)
• Simple handling and flexible positioning
• Very low inherent noise
• Virtually invisible assembly
• Humbucking coil
Package contents
1 e 608 microphone
1 Microphone clamp MZQ 800
1 Connection cable
1 Pouch
1 Instructions for use
Product overview A*
1 Microphone head
2 Gooseneck
3 MZQ 800 microphone clamp
4 3.5 mm jack plug
Diagrams can be found on the cover pages.
*
3
Using the microphone
Positioning the microphone on a wind instrument C
Pos. Resulting sound Commentary
C.1 • Reduced ambient noise Use the supplied clamp
to attach the micro-
phone to the bell of the
instrument.
C.2 • Clear, powerful sound
C.3 • Balanced, natural sound For a Saxophone, the
microphone should nor-
mally be directed partly
towards the bell and
partly towards the body
of the instument.
To reduce ambient noise (at the expense of the true “Saxophone
sound”) direct the microphone into the bell. In order to prevent inter-
ference due to crosstalk between adjacent sound sources, try to posi-
tion the microphone so that the interfering sound source is located in
the angle area of the highest cancellation of the microphone (approx.
120°; see polar diagram).
Optional accessories for optimally positioning the B
microphone
The various adjustment possibilities of the MZH 908 D and MZH 908 B
clamps together with the flexible gooseneck enable the microphone
to be optimally positioned on the sound source (see arrows in the
diagrams B).
Cleaning and maintaining the e 608
Caution Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause
a short-circuit and damage the electronics.
X
Keep all liquids away from the product.
X
Do not use any solvents or cleansing agents
.
XOnly use a soft, slightly damp cloth to clean the product.
4
Specifications
Transducer principle dynamic
Frequency response 40.....16,000 Hz
Pick-up pattern super-cardioid
Sensitivity (free field, no load)
(at 1 kHz)
0.8 mV/Pa
Nominal impedance (at 1 kHz) 250 W
Min. terminating impedance 1 kW
Connection cable 3 m, with 3.5 mm jack plug,
lockable
Operating temperature 0°C to +40°C
Dimensions Ø 17 x 185 mm
Weight 20 g
The polar diagram and the frequency response curve Dcan be found on
the cover pages.
Connector assignment
12
3
12
3
+ +
12
3
XL
R6
.3 mm
+
+
12
3
XLR
+
XLR
12
3
6.3 mm
+
+
balanced
XLR
XLR
+
5
Manufacturer Declarations
Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months
on this product.
For the current warranty conditions, please visit our website at
www.sennheiser.com or contact your Sennheiser partner.
FOR AUSTRALIA ONLY
Sennheiser goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other reason-
ably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
This warranty is in addition to other rights or remedies under law.
Nothing in this warranty excludes, limits or modifies any liability of
Sennheiser which is imposed by law, or limits or modifies any remedy
available to the consumer which is granted by law.
To make a claim under this warranty, contact
Sennheiser Australia Pty Ltd, Unit 3, 31 Gibbes Street Chatswood NSW
2067, AUSTRALIA.
All expenses of claiming the warranty will be borne by the person
making the claim.
The Sennheiser International Warranty is provided by Sennheiser
Australia Pty Ltd (ABN 68 165 388 312), Unit 3, 31 Gibbes Street
Chatswood NSW 2067 Australia.
In compliance with the following requirements
• WEEE Directive (2012/19/EU)
Please dispose of this product at the end of its operational
lifetime by taking it to your local collection point or recycling
center for such equipment.
CE Declaration of Conformity
• RoHS Directive (2011/65/EU)
• EMC Directive (2004/108/EC)
The declaration is available at www.sennheiser.com.
e 608
e 614
e 609 silver
e 604
e 602-II
e 835
e 845
e 865
e 901
e 902
e 904
e 906
e 908
e 914
e 935
e 945
e 965
e 608
e 614
e 609 silver
e 604
e 602-II
e 835
e 845
e 865
e 901
e 902
e 904
e 906
e 908
e 914
e 935
e 945
e 965
Other manuals for evolution e608
3
Table of contents
Other Sennheiser Microphone manuals
Sennheiser
Sennheiser MD 419 User manual
Sennheiser
Sennheiser MZH 3040 Dimensions
Sennheiser
Sennheiser ME 35 Dimensions
Sennheiser
Sennheiser MD 402 LM User manual
Sennheiser
Sennheiser MKH 8020 User manual
Sennheiser
Sennheiser EVOLUTION E908 User manual
Sennheiser
Sennheiser XS WIRELESS 2 User manual
Sennheiser
Sennheiser MK 4 User manual
Sennheiser
Sennheiser SKM 9000 User manual
Sennheiser
Sennheiser MKE 1 User manual
Sennheiser
Sennheiser Evolution E 606 User manual
Sennheiser
Sennheiser HSP 4 User manual
Sennheiser
Sennheiser SKM 5200 User manual
Sennheiser
Sennheiser AQS e 604 User manual
Sennheiser
Sennheiser HSP 4 Quick start guide
Sennheiser
Sennheiser ME 64 User manual
Sennheiser
Sennheiser EK 2000 User manual
Sennheiser
Sennheiser HSP Essential Omni User manual
Sennheiser
Sennheiser HSP 2 User manual
Sennheiser
Sennheiser ME 64 Instruction manual
