Seiko UC-2000 User manual
1
SEIKO
UC-2000 / UC-2200
User’s Manual
This manual is not a copy of the original one. I
wrote it by myself because I had none. This is the result
of hours of testing using my global knowledge in
programming and, most of all in Basic Programming.
Guillaume Tello, 2008.
2
Table of contents
Chapter 1 : Use as a Watch
Mode 5
Time and Date setting 6
Alarm Setting 6
StopWatch 7
Chapter 2: Memo A and Memo B
Startup 9
Preparing a Memo with the Keyboard 10
eading memos from the watch 11
Chapter 3: Basic Programming
Startup 13
Direct mode commands 14
Variables 16
User Defined Functions 17
Instructions 17
Functions 21
Operations 24
Error Messages 26
The lacks 27
3
Chapter 4: ROM Applications
Startup 29
DEMO 29
SCHEDULE 30
HIT 32
ACE 32
AMIDA 34
CA D 25
Chapter 5: Calc lator
Startup 37
Calculations 37
4
5
Chapter 1 :
Use as a Watch
The Seiko UC-2000 i a watch driven with four
button :
1. Split, Re et, Set, Scroll Up
2. Mode
3. Transmit
4. Start, Stop, Select, Scroll Down
For each, it u ual name appear in bold, that’
the one we’ll u e.
The normal di play look like thi :
mm-dd
day name
HH:MNse
MODE:
Par e the different creen and option of the
watch, if no application i loaded, you get:
Date/Time MODE MemoA MODE
MemoB MODE Alarm etting MODE
StopWatch MODE Time&date etting
MODE Back to Date/Time di play
6
If an application i loaded, it replace MemoA
and MemoB:
Date/Time MODE ApplName MODE
Alarm etting MODE StopWatch MODE
Time&date etting
MODE Back to Date/Time di play
Time and Date setting:
With MODE go to Time & Date etting (blinking
econd )
With SELECT move to the data you want to
modify
With SET change it value
o particular ca e of the econd
SET with econd <30 round to
the current minute
SET with econd >30 round to
the next minute
With MODE exit to the normal di play
Alarm Setting:
With MODE go to Alarm etting (blinking ON or
OFF)
With SELECT move to the data you want to
modify
With SET change it value
With MODE exit to the normal di play
7
You may not hear your alarm if the bell character
i not pre ent on the normal di play! To et it, pu h both
SET and SELECT button on the normal di play.
StopWatch:
With MODE go to StopWatch
If “STOPWATCH” or “STOP” i di played then:
o with SELECT you tart the chronometer,
“RUN” appear
o with SET you re et the chronometer
If “RUN” i di played then:
o with SELECT you top the chronometer
and “STOP” appear
o with SET you copy the current time to the
upper value, “SPLIT” appear and the
lower chronometer goe on
With MODE exit to the normal di play
For how to u e the Memo or the Application , ee
next chapter .
8
9
Chapter 2:
Memo A and Memo B
Startup
Mount the watch (UC-2000) on the Tran mi ion
Circuit
Pu h the TRANSMIT button, you hould ee:
“TRANSMIT”
STAND-BY
Switch the keyboard (UC-2200) ON and pu h the
M-A button, you hould ee(*):
1 EDIT
2 COPY
3 BACK UP
4 LOAD
5 COPY/Bup
Or pu h the Shift + M-B button, you hould
ee(*):
1 EDIT
2 COPY
To elect the line you want, u e the down and up
arrows and then ENTE .
(*) If a Basic program is present in memory, you are
asked wether or not you want to delete it and turn the
memory into Memo.
10
Preparing a Memo
with the Keyboard
1) EDIT:
Allow you to edit the memo. You can u e the
whole keyboard, the arrow to navigate, the function
key .
When you have fini hed:
if you u e STOP key all modification are
cancelled
if you u e Shift+F10 (End) modification are
accepted
2) COPY:
Print the whole Memo:
if empty, you get Memory Empty
if filled, you get:
** COPY (Memo A) **
1: line1
2: line2…
***** END *****
3) BACK UP
(not available for Memo B
Save a copy of the Memo in the keyboard’
memory.
This manual suits for next models
1
Other Seiko Watch manuals
Seiko
Seiko 1B25 User manual
Seiko
Seiko Cal. 5J22 5J32 User manual
Seiko
Seiko C-20 User manual
Seiko
Seiko Presage SPB309J User manual
Seiko
Seiko Arctura SKA201 User manual
Seiko
Seiko 1E20 User manual
Seiko
Seiko Conceptual S23158J User manual
Seiko
Seiko 4T53 User manual
Seiko
Seiko KINETIC 7D48 User manual
Seiko
Seiko 7T04 User manual
