Segway 1689500001 Reference guide

Customer Installable Parts

Upper Cargo Structure & Bag

e Series and i Series Models Only

Kit Number: 1689500001 Contents

·1 handlebar bag

·1 bag lid

·1 wire mounting frame

·1 control shaft clamp

·1 clamp screw

·2 button head screws

Specifications

·10 lb. maximum carrying capacity

·Polypropylene and polyethylene construction

·Polyester and mesh soft-sided pockets with cord locks

·Stainless steel snaps on bag lid

·Hook and loop attachment straps

·Powder-coated stainless steel wire mounting frame

Tools Required

·2.5mm hex wrench

·4mm hex wrench

WARNING

Always shut down your Segway HT and unplug the charge cord before performing any maintenance or installing any part or

accessory.

Follow these instructions carefully. Failure to follow these instructions carefully could damage your Segway HT and render it

unsafe to use.

Before you begin:

Do not use the parking stand to support the Segway HT while performing this procedure. The parking stand

is not designed to withstand the forces that may be generated. Instead, lay the Segway HT down on its back

side or support it with other objects so that you have easy access to the front of the handlebar and control

shaft.

Installation

Step 1

If present, remove the two button head

screws located on the bottom of the

handlebar using a 4mm hex wrench.

Step 2

Align the holes in the wire frame with the

screw locations in the bottom of the

handlebar so that the frame is on the front

side of the control shaft.

Step 3

Install the two button head screws through

the holes in the wire frame and into the

bottom of the handlebar using a 4mm hex

wrench and torque to 7.5 N-m.

Step 4

Install the clamp on the control shaft just

above the height adjustment collar with the

hook facing forward and up.

Note

Replace any fasteners you remove when performing this

installation with the new fasteners included in this kit .

Step 5

Slide the clamp up to the wire frame so that the wire frame rests in the hook.

Step 6

Install the clamp screw and with a 2.5mm hex wrench torque to 1.5 N-m. (The gap between the halves of the

clamp should be about 4mm.)

Step 7

Lightly tap the wire frame so that it snaps in the hook of the clamp.

Step 8

Drape the cargo bag over the handlebar so that the Display and Key Port are not obstructed.

Step 9

Secure the hook and loop straps around the wire frame at the bottom and sides of the bag.

LIMITED WARRANTY The Segway HT Upper Cargo Structure and Bag is an accessory covered by the SegwayTM

Human Transporter Limited Warranty (copy delivered with this kit).

Questions?

If you are missing a part, or if you need to return the product please contact Segway Customer

Service at 866.4SEGWAY (866.473.4929) or on our website at

www.segway.com/support/contact_us.html.

Table of contents

Other Segway Scooter manuals

Segway

Segway Steering Grip Kit Reference guide

Segway

Segway Ninebot KickScooter Air T15 User manual

Segway

Segway Ninebot Urban A200 User manual

Segway

Segway ninebot KickScooter MAX G30P User manual

Segway

Segway eMoped C80 User manual

Segway

Segway Ninebot S 2 User manual

Segway

Segway NINEBOT ONE S1 User manual

Segway

Segway i180 Guide

Segway

Segway NEB1002-H1 User manual

Segway

Segway Pt x2 User manual

Segway

Segway Ninebot KickScooter F30 Operating manual

Segway

Segway Ninebot eKickScooter User manual

Segway

Segway GT User manual

Segway

Segway E300SE User manual

Segway

Segway i2 SE User manual

Segway

Segway Ninebot KickScooter User manual

Segway

Segway Ninebot KickScooter User manual

Segway

Segway P65E User manual

Segway

Segway Ninebot KickScooter User manual

Segway

Segway GT1A User manual

Segway

Segway Ninebot KickScooter Air T15 User manual

Segway

Segway G30D User manual

Segway

Segway KickScooter User manual

Segway

Segway Ninebot KickScooter User manual

Popular Scooter manuals by other brands

TEKTRO

TEKTRO CHEETAH owner's manual

Douglas

Douglas Vespa Sprint Operation and maintenance

PLAYTIVE

PLAYTIVE AS-2448 Instructions for use

Ebinger

Ebinger DONKEY XL User instructions

Flyer

Flyer Mountain Original instruction manual

BackCountry eBikes

BackCountry eBikes Storm owner's manual

equipmed

equipmed FreeRoam II user manual

Yoto

Yoto Lion owner's manual

WESTHILL BIKES

WESTHILL BIKES LINK user manual

BAnff

BAnff eProdigy series Assembly manual

Winther

Winther 475 Assembly instruction

Jetson

Jetson JBZL17 user manual

First Choice Mobility

First Choice Mobility Roma Medical Corella S741 user manual

Carrera

Carrera impel manual

Afikim

Afikim Superlight SL-3 user manual

CareCo

CareCo ZOOM owner's manual

Douglas

Douglas Vespa G.S. Service manual

Gazelle

Gazelle with BOSCH System user manual