Seaward APOLLO 500+ Installation and user guide

How to do point to point testing with

the Apollo 500+?

Note: we do not have a comprehensive set of instructions for this as it relies on the

person performing the test to be able to implement safe isolation prior to testing.

However, the following general instructions should be of help:

1. Perform safe isolation of appliance.

2. Prove dead.

3. Null the Apollo test leads in manual mode. There is a video on our website

(see below).

4. Connect the Apollo via the 2 test leads as per one of the attached

drawings. At this point if voltage is detected on the circuit the Apollo will

read 'External Voltage Detected' and refuse to go ahead with the test. If so,

you will need to ensure it is properly isolated and prove dead again.

5. Start the test either using the test sequence or the manual test function.

DO NOT start the test before the probes are connected to the circuit.

To perform an insulation resistance test the process is very similar.

Note: we do not advise on how to perform the test as this relies on the person

performing the test been able to implement safe isolation prior to testing.



If you require more help, please contact us at

https://www.seaward.com/gb/enquire/

.

15-18 Bracken Hill, South West Industrial Estate, Peterlee, County Durham, SR8 2SW, United Kingdom

t: +44 (0) 191 586 3511 | f: +44 (0) 191 586 0227 | e: [email protected]

seaward.com

15-18 Bracken Hill, South West Industrial Estate, Peterlee, County Durham, SR8 2SW, United Kingdom

t: +44 (0) 191 586 3511 | f: +44 (0) 191 586 0227 | e: [email protected]

seaward.com

Table of contents

Other Seaward Test Equipment manuals

Seaward

Seaward PrimeTest 300 User manual

Seaward

Seaward SOLAR UTILITY PRO User manual

Seaward

Seaward APOLLO+ Series User manual

Seaward

Seaward Solar PV150 User manual

Seaward

Seaward PowerTest 200 User manual

Seaward

Seaward Live Line Tester User manual

Seaward

Seaward APOLLO+ Series Use and care manual

Seaward

Seaward Solar PV150 User manual

Seaward

Seaward PrimeTest Series User manual

Seaward

Seaward PAC3760 PLUS User manual

Seaward

Seaward ERT1557 User manual

Seaward

Seaward Supernova Elite User manual

Seaward

Seaward PV200 Installation and operating instructions

Seaward

Seaward EV100 User manual

Seaward

Seaward PV200 User manual

Seaward

Seaward PrimeTest 250+ User manual

Seaward

Seaward PowerPlus 1557 User manual

Seaward

Seaward PrimeTest 300 User manual

Seaward

Seaward PrimeTest 100 User manual

Seaward

Seaward Clare B255 User manual

Seaward

Seaward PrimeTest 125 EL User manual

Seaward

Seaward Apollo 600 User manual

Seaward

Seaward Sentinel Series User manual

Seaward

Seaward 227A910 User manual

Popular Test Equipment manuals by other brands

SMART

SMART KANAAD SBT XTREME 3G Series user manual

Agilent Technologies

Agilent Technologies BERT Serial Getting started

Agilent Technologies

Agilent Technologies N3280A user guide

Vernier

Vernier Go Direct Voltage manual

Lifeloc

Lifeloc R.A.D.A.R. quick start guide

Fluke

Fluke T5-600 Service information

Mercury

Mercury TSL01 user manual

MAHA

MAHA MBT Series Original operating instructions

Fuji Electric

Fuji Electric P-61 instruction manual

ETC

ETC SealerAtor user manual

Skyfine

Skyfine ETHYWAY V2 user manual

Appion

Appion G5 Twin Operation manual

PCB Piezotronics

PCB Piezotronics 8159-0112A Installation and operating manual

BW Technologies

BW Technologies MicroDock II user manual

Sun Nuclear

Sun Nuclear 1027 user guide

Biomark

Biomark HPR LITE READER user manual

Hioki

Hioki 3169-20 instruction manual

Ashcroft

Ashcroft ATE-100 operating manual