Seamax AIR230 User manual
Inflatable Boat User Manual
Manuel de l'utilisateur bateau gonflable
DURABLE, FOLDABLE, AFFORDABLE
INCLUDES SEAMAX FULL PRODUCT LINES CATALOGUE
COPYRIGHT 2009 – 2017
120-11791 MACHRINA WAY, RICHMOND, BC, CANADA V7A 4V3
www.seamaxcanada.com www.seamaxmarine.com 604-277-7766
Seamax Inflatable Boat – English User Manual
- 1 -
Important
All of us at SEAMAX CANADA want to thank you for choosing a SEAMAX Inflatable boat. This Owners
Manual contains all the safety and operating information you will need to get the most out of your
Inflatable boat. It also contains information on how to provide care and maintenance to protect your
investment. Store this manual in a safe place for future reference and remember. You may download this
manual from our website if you happen to lose this copy.
The operator, passengers and craft are governed by local, national, and when applicable, international
rules and regulations of the waterways. If you are not familiar with these rules and regulations, your local
Department of Natural Resources can assist you. Safety courses are available from national and local
organizations and are highly recommended for anyone who is not familiar with the rules and regulations
of safe operation of water vessels.
The product you have purchased comes with a limited warranty from SEAMAX CANADA. The terms and
conditions of the warranty are in the Warranty Information Section of this manual. Keep this booklet and
your sales slip together for future reference. You may be asked to provide proof of purchase for
in-warranty service. For any questions or concerns about our products, please email us and we will
respond as quickly as possible.
Seamax DO NOT recommend using a high pressure air compressor to inflate your new boat (Except 12
volt battery powered air pumps). Inflatable boats are not design to be inflated with high pressure air
compressors. This may cause the seams to rupture or the air valves to malfunction. This in turn could
create a dangerous situation and personal injury could occur if a seam was to rupture.
This type of inflation will void your warranty.
Purchase Records
Record your Hull Identification Number (HIN) and engine mode / serial number. The HIN is located on the
back of the boat on the starboard side. The engine model / serial number is located on the swivel bracket.
You will need this information to obtain parts, warranty service or provide information to your local law
enforcement agency if your boat is lost or stolen.
Owner Information & Contact:
Boat Model & HIN:
Engine Model & Serial #:
Place of Purchase & Order #:
Seamax Inflatable Boat – English User Manual
- 2 -
1. WARRANTY
WARRANTY TERMS
SEAMAX Inflatable Boats are warranted to be free of defects in material and workmanship during the following
prescribed warranty period. All warranty claims are handled in Canada by Seamax Canada or local Seamax dealer.
The boat’ hull, floor, all hull attachments and accessories, but not limited to, floorboards. seats, carrying bags, oar
locks, oars, rope, manual pump, lifting handles, d-rings, oar holders, valves, seat webbings, and transom integrity are
covered by this Limited Warranty for one (1) year from the date the product is first sold. All the air holding fabrics are
warranted against defects in material or workmanship that cause blistering and delaminating for three (3) years for
seams and five (5) years for (PVC) fabrics. The repair, replacement of parts, or the performance of service under this
warranty does not extend the life of this warranty beyond its original expiration date. Unexpired warranty coverage can
be transferred to a subsequent purchaser upon proper registration of the product.
This Warranty applies only to defects in material and workmanship; it does not apply to normal wear and tear, or to
damage caused by: (1). Neglect, lack of maintenance, accident, commercial, abnormal or improper use or bad
assembly; (2). Use of an accessory or part neither manufactured nor sold by us; (3). Participating in or preparing for
races or other competitive activity; (4). Alteration or removal of parts; (5). Improper Protection against UV-light, high
temperature and heat sources; (6). Has been repaired, modified or tampered with by someone other than
manufacturer without approval; (7). Damage or deterioration of the fabric due to exposure to fuel, harsh solvents or
any other chemicals; (8). Seam separation due to heat exposure; (9). Has not been assembled, used, and maintained
in accordance with the instructions or owner's manual accompanying the product; (10). Boat has been damaged as a
result of shipping, warehousing or storage.
SEAMAX limited warranty does not cover incidental or consequential costs and expenses such as haul-out, launching,
towing transport and storage charge, telephone or rental charges of any type, inconvenience, waste of time or income
losses, or other consequential damages.
The consumer must provide COMPLETE access to the product for inspection and warranty service by delivering the
product to SEAMAX CANADA or a dealer authorized to service the SEAMAX product.
Our obligation under this warranty shall be limited to repairing a defective part, or at our discretion, refunding the
purchase price or replacing such part or parts as shall be necessary to remedy ANY defect in material or workmanship
as covered by this warranty.
Seamax Inflatable Boat – English User Manual
- 3 -
PRODUCT REGISTRATION
To be eligible for warranty coverage, the product must be registered with SEAMAX CANADA within 30 days from
purchase other than purchasing from Seamax Directly or Seamax Online.
SEAMAX limited warranty is transferable to a subsequent purchaser for the remainder of the unused portion of the
warranty. This will not apply to products used for commercial applications.
To transfer the warranty to the subsequent owner, send us a (a) Copy of the Bill of Sale or (b) Purchase Agreement
within 30 days of transfer. Warranty Claims may not be accepted without proper presentation of boat title transfer.
OUR SUPPORT
Our office is located in Richmond, BC, Canada. We are the manufacturer of Seamax inflatable boats and
accessories. Seamax Inflatable boats are designed like larger boats with excellence in mind. We have
carefully thought out every detail from the overall boat design to the smallest patch application. If you
need assistance or service, please first refer to this booklet. Additional help is available by visiting our
website, contacting us or visiting any local Seamax dealers. Your satisfaction with your inflatable boat is
very important to us.
Seamax Marine (Canada Head Office)
120-11791 Machrina Way, Richmond, BC, Canada V7A 4V3
http://www.seamaxcanada.com http://www.seamaxmarine.com
Email: support@seamaxcanada.com sales@ seamaxmarine.com
TEL: 1-877-907-7766 1-604-277-7766 Fax: 1-604-277-3360
Seamax Inflatable Boat – English User Manual
- 4 -
2. ABOUT BOATING
The operator (driver) is responsible for the correct and safe operation of the boat and safety of its occupants and
general public. It is strongly recommended that each operator (driver) read and understand this entire manual before
operating the boat. Be sure at least one additional person on board is instructed in the basics of starting and operating
the outboard and boat handling in case the driver is unable to operate the boat. Remember in Canada you must have
a boating certification license for all motorized watercraft. All local rules and regulations apply to all waterways. If you
have any questions or concerns, please feel free to contact with us. Safety and operating information that is practiced,
along with using good common sense, can help prevent personal injury and product damage.
Boater’s operation license is required in Canada and USA when use the boat with an outboard engine or electric motor.
Your boat may have to be registered with Transport Canada or DMV office (Department of Motor Vehicles) before use.
Please make sure you and your boat can meet all the government requirements when you transport the boat on the
land or use the boat in the water.
LANYARD STOP SWITCH
The purpose of a lanyard stop switch is to shut down the engine in an emergency situation when the operator moves
from a safe operating distance (as in accidental ejection from the operator's position) to activate the switch. Tiller
handle outboards and some remote control units are equipped with a lanyard stop switch. A lanyard stop switch can
be installed as an accessory, generally on the dashboard or side adjacent to the operator's position. Should the
operator fall out of the boat, the possibility of serious injury or death from being run over by the boat can be greatly
reduced by stopping the engine immediately. Always properly connect both ends of the stop switch lanyard to the stop
switch and the operator.
The lanyard is coiled to make its at-rest condition as short as possible to minimize the likelihood of lanyard
entanglement with nearby objects. Its stretched-out length is made to minimize the likelihood of accidental activation
should the operator choose to move around in an area close to the normal operator's position.
Seamax Inflatable Boat – English User Manual
- 5 -
PROTECTING PEOPLE WHILE CRUISING
It is very difficult for a person standing or floating in the water to take quick action to avoid a boat heading in his or her
direction, even at slow speed. Always slow down and exercise extreme caution any time you are boating in an area
where there might be people in the water. Whenever a boat is moving (coasting) and the outboard gear shift is in the
neutral position, there is sufficient force by the water on the propeller to cause the propeller to rotate. This neutral
propeller rotation can cause serious injury. Shift outboard into neutral and shut off the engine before allowing people to
swim or be in the water near your boat.
WAVE AND WAKE JUMPING
Operating recreational boats over waves and wakes is a
natural part of boating. However, when this activity is
done with sufficient speed to force the boat hull partially
or completely out of the water, certain hazards arise,
particularly when the boat re-enters the water.
The primary concern is the boat changing direction while in the midst of the jump. In such a case the landing may
cause the boat to veer violently in a new direction. A sharp change in direction can cause occupants to be thrown out
of their seats or out of the boat. Use extreme caution when near other boats. There is another hazard from allowing
your boat to launch off a wave or wake. If the bow of your boat pitches down far enough while airborne, upon water
contact it may penetrate under the water surface and submarine for an instant. This will bring the boat to an instant
stop and can send the occupants flying forward. The boat may also steer sharply to one side on impact with the water.
Please be aware of these wave and wake hazards and use extreme caution.
Seamax Inflatable Boat – English User Manual
- 6 -
IMPACT WITH UNDERWATER HAZARDS
Reduce speed and proceed with caution whenever you drive a boat in shallow water areas, or in areas where you
suspect underwater obstacles may exist. These obstacles could be struck by the bottom leg of the outboard or the
boat bottom and cause severe damage to the boat and or motor. Travel these areas with extreme caution, to reduce
injury or impact damage from striking a floating or submerged object reduce your boat speed.
BOATING SAFETY
Boat operators should complete a boating safety course. And the boat operator may need to pass a Pleasure Craft
License to operate any motorized craft on the water (mandatory in Canada). In order to safely enjoy the waterways,
familiarize yourself with local and other governmental boating regulations and restrictions, and consider the following
suggestions:
1) On hand have enough life-Jackets (or personal floatation devices) with you for all your Passengers.
2) Check the pressure and the condition of the boat before you start sailing.
3) Pay close attention to the weather conditions for your safety.
4) Do not forget important papers (Eg. maps and boating license), oars, and flash light.
5) Make sure you take repair kits, first aid kit and a MANUAL air pump with your boat.
6) Make sure you do not exceed the maximum recommended number of persons on the capacity plate.
7) Do not exceed the recommended maximum horsepower rating.
NOTE: Use of alcohol or drugs is prohibited while operating a water craft. Alcohol or drug use impairs your
judgment and greatly reduces your ability to react quickly. This carries the same penalty as driving a car if
convicted.
Seamax Inflatable Boat – English User Manual
- 7 -
Have an approved personal flotation device of suitable size for each person aboard the vessel (it is the law) and have
it readily accessible. Do not overload your boat. Most boats are rated and certified for maximum load (weight)
capacities (refer to your boat capacity plate). Perform safety checks and required maintenance. Follow a regular
schedule and ensure that all repairs are properly made. Know and obey all nautical rules and laws of the waterways.
Prepare other boat operators. Instruct at least one other person on board in the basics of starting and operating the
outboard, and boat handling, in case the driver becomes disabled or falls overboard. Stop the engine whenever
passengers are boarding, unloading, or are near the back (stern) of the boat. Just shifting the outboard into neutral is
not sufficient. The operator of the boat is responsible by law to maintain a proper lookout by sight and sound. The
operator must have an unobstructed view particularly to the front. Never operate your boat directly behind a water
skier in case the skier loses control and hits the water. Use extreme caution around any swimmer, diver or persons in
the water.
BOAT CAPACITY PLATE
Seamax inflatable boats are registered with Transport Canada and carry our own manufacture's identification code.
Each Seamax boat carries a capacity plate along required by Transport Canada .This certification along with the CE
certification allows Seamax Boats to be sold world wide.
This table shows that boat is designed and constructed for:
CATEGORIES NAVIGATION WAVE IND FORCE AND WHEIGHT
C Inshore
Designed for voyages in coastal waters, large bays, estuaries, lakes
and rivers where conditions may experience wind force 6 (Beaufort
scale) and wave heights up to 2 m (6.5 ft.)
D
Sheltered
Water
Designed for voyages on sheltered coastal waters, small bays, small
lakes, rivers, and canals where conditions may experience wind force 4
(Beaufort scale) & wave heights up to 0.5 m (1.5 ft.).
Seamax Inflatable Boat – English User Manual
- 8 -
3. Seamax design
Seamax is a registered inflatable boat manufacturer with Transport Canada and is treated as a registered boat builder
for US Coast Guard. Inflatable boats are probably the most stable boats on the water. They are used for offshore
rescue, whitewater rafting and are the boat of choice for most military agencies. Seamax Inflatable boats come in
several different sizes and floor combinations. Seamax Marine is the developer and distributor of Seamax inflatable
boats and accessories.
TECHNOLOGY OF INFLATABLE BOAT
The Seamax new features listed below are based on commercial inflatable standards, upgraded from commercial
standards, and Seamax self-developed. All these features make our boats more rigid, more durable comparing with
many other boats. And we can guarantee the Seamax boats have the longest life time. Thank you again for choosing
Seamax.
1. Four Layers Overlapped Seam (FOS)
Description – FOS
4-layer overlap seam finishing is the strongest seam construction standard in the inflatable boat industry. The 2 main
chamber fabrics are bonded together with ½” overlapped. And there are 2 extra 1” pieces of seam tape on both sides
to reinforce the main seam. Total thickness of FOS seam is about 4-5mm thick and 2.5” wide. FOS has been applied
to all Hypalon boats since 2013 and all PVC boats since 2015.
Seamax boats with FOS standard
have a strong pontoon chamber which
is air tight and will have a longer life
expectancy. FOS Seamax chamber
seams are better at resisting sun and
heat damage over the long
term. Demo photos show the FOS
seam applied on Hypalon material.
Now the FOS standard is applied to all
our new PVC and Hypalon inflatable
boats.
Double Hot Welded Standard - Seamax offers double hot
welded seam as the highest industry standard. After the main
chamber fabric welded together, we add one sky-blue seam
tape welded from chamber inside to reinforce and double the
strength. Another body color seam tape is added from
outside for the best looking and extra reinforcement.
Seamax Inflatable Boat – English User Manual
- 9 -
2. Inner Bottom Reinforcement (IBR)
Description – IBR
The Inner Bottom Reinforcement Layer is located on the boat bottom central keel area (inside). It is a simple idea but
gives a lot of extra protection for your boat bottom. The IBR coverage is about 3' x 1' for small boats and up to 5' x 2'
on larger boats. Seamax has been using the IBR standard to build heavy duty boats since 2010. The IBR system is
not visible from the outside of the boat and causes no extra water resistance when out on the water. IBR standard has
been applied to selected Seamax models since 2011.
Benefit – IBR
The IBR system makes the hull more rigid. It is a great feature to have on your boat as it protects your boat when you
are launching the boat from beach or a trailer. IBR also increases hull thickness in case the boat hits something
submerged in the water. Seamax has no hull bottom damage claim since the IBR standard is in effect.
3. Transom Stabilizer Reinforcement (TSR)
Description - TSR
Boat transom is glued with pontoon and bottom all together. Sun light, water and temperature can severely damage
the transom structure on roll up inflatable boats. Adding extra stability and protection to the transom is very important
to build our Seamax boats. Besides using marine grade solid birch plywood to increase the quality, we have
developed new manufacturer standards that focus every points of making. We call our standard Transom Stabilizer
Reinforcement (TSR). The TSR feature has been used on most of our Seamax PVC boats since 2015.
Benefit - TSR
TSR makes the boat and transom much stronger. The
transom adaptors are fully reinforced with 2 additional
layers from top and bottom. The fabric coverage of
transom is increased and double layered. TSR will
help the pontoons disperse the outboard motor
vibration and weight. The reinforcement technology
will dramatically extend the overall life time of our
Seamax inflatable boats.
This manual suits for next models
14
Table of contents
Other Seamax Boat manuals
Popular Boat manuals by other brands
PURSUIT
PURSUIT OS 335 owner's manual
Boston Whaler
Boston Whaler CONQUEST 345 owner's manual
Jeanneau
Jeanneau SUN ODYSSEY 41 DS owner's manual
Meridian
Meridian 490 Pilothouse owner's manual
Advanced Elements
Advanced Elements AdvancedFrame Expedition AE1009 owner's manual
Robo Marine Indonesia
Robo Marine Indonesia GEOMAR user manual
