Sealey AP12160 User manual

INSTRUCTIONS FOR:

WORKBENCH 1.2 METRE WITH DRAWER

MODEL No:AP12160

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and

properly maintained, give you years of trouble free performance.

1. SAFETY INSTRUCTIONS1. SAFETY INSTRUCTIONS

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.

USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE

DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

3. CONTENTS

2. INTRODUCTION

1.0 GENERAL SAFETY

WARNING! Ensure Health & Safety, local authority, and

general workshop practice regulations are adhered to when

using this bench.

Locate bench in a suitable work area.

Keep the work area clean, uncluttered and ensure there is

adequate lighting.

WARNING! Use bench on level and solid ground, preferably

concrete.

Keep the bench clean and tidy in accordance with good

workshop practice.

Keep children and unauthorised persons away from the work area.

DO NOT use the bench for any purpose other than that for

which it is designed.

DO NOT undertake work on the bench without the workpiece

being adequately secured. Use clamps or a vice (not included)

to secure the workpiece - available from your Sealey dealer.

DO NOT use the bench outdoors .

DO NOT get the bench wet or use in damp or wet locations or

areas where there is condensation.

DO NOT exceed the maximum load for the work surfaces,

worktop and bottom shelf - 100kg each, drawer - 20kg. Avoid

heavy impacts when placing objects onto the surfaces.

DO NOT clean the bench with any solvents which may damage

the surface or the protective coating on the worktop.

Unpack the product and check the contents against the list/

drawing on the right. Should any items be missing or damaged

contact your Sealey dealer.

AP12160 Issue No.1 21/06/12

2.1 Introduction:

Boltless design makes the unit easy to assemble, with minimal

tools being required. One large drawer with ball bearing slides,

fitted with two handles. MDF Worktop measures 1210 x 605mm

(W x D), which has a comfortable work height of 900mm. Fitted

with anti-slip foot protectors.

2.2 Dimensions:

Size (W x D x H ):1210 x 605 x 900mm

Worktop: 1210 x 605mm.

Max Capacity (per level): 100kg evenly distributed.

Max Capacity of drawer: 20kg evenly distributed.

Original Language Version

4. METHOD OF CONSTRUCTION

Structural members have

flat headed, waisted

rivets attached which

pass through keyholes in

the uprights and are

pushed down to secure

them.

5. ASSEMBLY

AP12160 Issue No.1 21/06/12

Original Language Version

5.1 Study each diagram and identify the components required with

reference to the parts list/drawing on page 1.

5.2 Build up the basic frame as shown in diagrams 1,2,3 & 4.

5.3 Attach the drawer supports to the basic frame as shown in

diagram 5.

5.4 Assemble the drawer with reference to diagram 6. Place the

6mm MDF drawer base into the bottom of the draw frame.

Insert the drawer into the drawer runners as shown in diagrams

7 and 8.

5.5 Place one 15mm MDF board onto the top of the frame as

shown in diagram 9 to form the worktop. Insert the other 15mm

MDF board into the lower part of the frame and move it into

position on the lower support beams to form the lower shelf.

See diagrams 9 & 10.

Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to

www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500.

AP12160 Issue No.1 21/06/12

Original Language Version

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

sales@sealey.co.uk

Sole UK Distributor, Sealey Group,

Kempson Way, Suffolk Business Park,

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Web

Table of contents

Popular Tools Storage manuals by other brands

Ryobi

Ryobi RWB03 Original instructions

Husky

Husky H27CH5TR4BGK Use and care guide

Scheppach

Scheppach ts 2100 Translation from original manual

Cornwell Tools

Cornwell Tools CTB360AKBK Assembly instructions

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Assembly instruction

Cassese

Cassese CS200 CART user & parts manual

Kendall Howard

Kendall Howard ESDW-9630-1000 owner's manual

Lista

Lista Align Instructions for assembly

Workzone

Workzone 99609 Assembly instructions

Stanley

Stanley STST83800-1 instruction manual

Homak

Homak PROFESSIONAL Series Owner's manual & operating instructions

Perel

Perel ROLLER SHUTTER STORAGE CABINET Assembly instructions

Husky

Husky H5CH2R Use and care guide

BGS technic

BGS technic 4107 manual

Clarke

Clarke CWB1250 Instruction

Ryobi

Ryobi RWB02 Original instructions

Husky

Husky H52CH6HDV3WHT Use and care guide

General International

General International Excalibur 40-100 Setup & operation manual