Sealey MS081FS User manual

FREESTANDING MOTORCYCLE HELMET &

GEAR TIDY

MODEL NO: MS081FS

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGEAND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

8DO NOT locate this tidy in such a position as to create the risk of injury from contact with the head or any other part of the body.

8DO NOT overload this tidy; it should only be used for the designed purpose.

8DO NOT locate in a position where items could fall from the tidy owing to accidental contact.

9Ensure that, when installed, it can be used without over-reaching or over-balancing.

2. INTRODUCTION

Powder coated steel construction, for added corrosion resistance. Freestanding unit, designed to organize the storage of gloves, clothing, boots

and helmet. Adjustable shelves allows for easy storage of up to four helmets. Strong construction, shelf capacity of 18kg and hanging rack

capacity of 10kg. Large capacity, capable of storing two full sets of kit and more.

3. SPECIFICATION

Model No: MS081FS

Depth: 460mm

Height: 1925mm

Width: 545mm

4. ASSEMBLY

4.1. Refer to diagram alongside.

5. CARE

5.1. Clean with a soft, damp cloth.

8DO NOT use abrasive or solvent cleaners.

MS081FS Issue 1 12/10/22

Original Language Version

Refer to

instructions

Step 1

Fit lower

section of uprights

into base unit

Step 2

Fit triangular braces

with fixings supplied.

Step 5

Adjust feet to ensure

good contact with

floor

Step 3

Insert upper

upright

sections

into

lower uprights

Step 4

Fit shelves into

uprights at desired

height

MS081FS Issue 1 12/10/22

Original Language Version

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior

notice.

Important: No Liability is accepted for incorrect use of this product.

Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste.All tools, accessories and packaging should be sorted,

taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product

becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and

dispose of the product and fluids according to local regulations. REGISTER YOUR

PURCHASE HERE

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 