3
BP12ACC Single Stage E-Pump | SETUP
Press the ON button to
begin inflation.
The pump automatically
stops once the pressure
is met. Do not turn off
pump.
Keep pump in carry bag to
make transportation easy
and to protect the pump
from sand.
Warning: Do not run
pump for more than 20
minutes. Allow 20 minutes
for cool down before
restarting.
BP12ACC Single Stage E-Pump
PSI Settings for Sea Eagle Boats:
3.0 - 3.5 PSI for: FastTracks, Explorers, PaddleSki, 285fpb, STS10,
FoldCat & Sport Runabouts
8 - 10 PSI for: Travel Canoe, RazorLites
5-10 PSI for: RescueBoard
12-14.5 PSI for: SUPs
Troubleshooting
Problem: Pump does not shut o when inating.
Remove hose. Connect pump to power source. Turn on and
cover red (out) port to block airow. If pump shuts o, it is in
working condition. If pump does not shut o, call Sea Eagle
Customer Service, replacement is needed.
Problem: Pump stops working before ination is complete and
won’t restart. The fuse might be blown. Replace fuse, but do
not use the pump in that auxiliary power outlet.
Problem: Pump smells like it is burning.
Turn pump o and do not try to restart. Unplug from power
supply. Call Sea Eagle Customer Service.
Problem: Pump no longer pumps air and is making unusual noise.
Pumping mechanism has broken, call Sea Eagle Customer
Service.
When calling Sea Eagle Customer Service, please have
pump, hose, adapter and power supply available for
testing and troubleshooting.
BP12ACC Single Stage E-Pump | Troubleshooting
Sea
Eagle
Boats
Inc.
19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • [email protected]
