SCUD SBT-2008 User manual
0
CONTENTS
Brief Introduction
……………………………………
3
Bluetooth
Bluetooth Earphone
General Features
Operation……………………………………………6
Charge
Keypads function
Switch On/Off
Matching
Dialing and receiving
Connect PC and PDA
Important Info ……………………………………10
Troubleshooting
Maintenance
Charger
Wired Earphone
Battery Info.
List…………………………………………………15
1
Brief Introduction
What is Bluetooth?
Bluetooth technology is a cutting-edge open
specification that enables short-range wireless
connections between desktop and notebook computers,
personal digital assistants, mobile phones, camera
phones, printers, digital cameras, headsets, keyboards
and even a computer mouse. Bluetooth wireless
technology uses a globally available frequency band
(2.4GHz) for worldwide compatibility. In a nutshell,
Bluetooth technology unplugs your digital peripherals
and makes cable clutter a thing of the past.
Bluetooth technology, invented according to the
global standard and specialized for the global-recognized
frequency bandwidth ISM(Industrial Scientific and
Medical), is designed for transmitting the digital
information under the bandwidth of 2.4GHz~2.48GHz
divided into 79 channels, with the frequency of 1600
hops per second, covering a range of 10cm~10m .
Bluetooth Earphone
Bluetooth Earphone is designed with the latest
specialized technology for wireless sound transmission.
It can be connected with other Bluetooth devices, such as
cell phones, PCs, laptops, PADs within 15m range.
2
Caution:
Changes or modifications to this unit not expressly
approved by the party responsible for compliance will
void the user’s authority to operate the equipment.Any
change to the equipment will void FCC grant.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
3
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.
Modifications not authorized by the manufacturer may
void users authority to operate this device.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
4
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment.
General Features
Bluetooth Specification Bluetooth 1.1 version
Profiles Supported. Headset and Hands Free
Transmission scope
Class Class 2
Supporting
transmission packet HV1/HV2/HV3
Supporting
frequency-hopping
mode
USA/EU （79 channel）
Output power -8.0dBm
Frequency range (2.402～2.480)GHz
Size 60.5mm×26.0mm×21.0mm
Call Time 4 hours
Standby Time 100 hours
Recharge Battery 120 mAh/3.7V
5
SCUD LED
Schematic Diagram
6
Operation
Charge
There is the chargeable battery in the earphone. It
needs for 3 hours to be charged fully when used for the
first time, and then it will take about 2~3 hours to charge
each time. Communication time will last for about 4~5
hours and the standby time is about 100 hours when the
battery has been charged fully.
1.Connecting the charger to a socket (or connect the
car-used charger with the cigarette plug in the car), the
indicator will be turned on as red. (Don’t use the
car-used charger for the first time).
2.Connect the charger with earphone as the picture
shows, it is charging at this moment.
3.When the power is full, the red indicator on the
charger will become green slowly.
Keypads Function
This Bluetooth earphone supports two kinds of profile,
which is operated through three keypads showed as follows.
The profile is selected depending on the terminal cell-phone.
It cannot be altered after being selected. Please consult the
manual that the cell-phone manufacturer offers.
Headset Profile：
7
TALK Button Volume adjustable
button
State
Short
press Hold
press Short
press Hold
press
Power off _ Power
On _ _
Standby Voice
dial Power
Off _ _
Voice Dial Cancel Power
Off _ _
Ringing Answer
Power
Off _ _
Communication End a
call Power
Off Adjust
volume Mute
Hands Free Profile:
TALK Button Volume adjustable
button
State Shot
press Hold
press Shot
press Hold
press
Power Off _ Power On _ _
Standby Voice
dial Power
Off Adjust
volume
Re-dialed
last call
No.
Voice Dial Cancel Power
Off _ _
Ringing Answer
Refuse
calls _ _
Communication End
calls Transfer to
mobile Adjust
volume Mute
Switch ON/OFF
1.To switch on the earphone: Pressing TALK for about
8
5 seconds would lead the earphone to work when the
LED indicator twinkles green for 5 times.
2.To switch off the earphone: Pressing TALK for about
3 seconds, it will be off when the red LED indicator
twinkles for 5 times and the red、green indicator both
don’t show.
3.The green indicator’s twinkling once per 3 seconds
means under standby. And the twinkling of red
indicator shows the insufficient power (Red、Green
indicator keep off when the power is insufficient).
Matching
Before using the earphone, you must match it with
your mobile phone or other Bluetooth devices.
1.The earphone must be off before matching. To start
matching, press TALK for about 9 seconds till the red
light and the green light shine alternately.
2. The specification of Bluetooth phone would give the
details of starting the matching program with the
Bluetooth earphone. After searching, a new option of
“SUCD010” would show in the Bluetooth device list.
3.You will be required to enter Pin-code of 0000，and
press CONFIRM to finish the matching program.
(NOTE: 0000 is the pre-setting Pin-code in earphone）
Attention:
1. When the earphone isn’t in the matching mode,
your mobile could not search it. Make sure that the
earphone is in matching mode before searching.
Table of contents
