2. YOUR SAFETY
Before Installation
1. We recommend this appliance be installed or repaired by a qualified Schweigen
Home Appliances technician.
2. Please see our website www.schweigen.com.au for a list of our recommended
installers.
3. It is dangerous to modify any part of this appliance. Modification of any kind, will
immediately void the warranty.
4. The manufacturer declines all responsibility in case of failure to adopt proper safety
measures.
5. Ensure that the location in which this appliance is installed, has good and permanent
ventilation.
6. Please consult local laws and regulations and install in accordance.
7. Please use an earthed electrical connector that coincides with relevant local laws and
regulations.
8. Check that the power voltage in your area corresponds to the appliance voltage
indicated on the rating label.
9. This appliance must be connected to an electrical supply that has a grounded
connection.
10. Check that the installation and electrical connections are carried out by a qualified
technician and that the indicated instructions and local regulations in force are met,
using materials that are compliant with the applicable legislation.
11. The company will not be responsible for installations executed by non-qualified staff
and installations that fail to heed the applicable legislation on electrical safety (with
regard to both modes and materials).
12. The electrical technical data can be found inside the rangehood, after removing the
grease filters.
13. The flexible power cable supplied is already connected internally and emerges from
the rangehood near the air outlet tube.
14. Before installing the electrical connections, you should:
• Verify that the indicated electrical data coincides with the voltage values and
frequency of the electrical circuit in the house where the rangehood is to be installed;
• Check that the premises has electrical protection against short circuits and
electrocution, pursuant to the applicable legislation;
• Always switch off the current using the double-pole switch before maintenance and
turn the power on again for normal use only when the operation has been completed.
15. Pay attention to the opening of the door. Do not force the door open.
