Schertler TEDDY User manual
TEDDY
stage monitor
IMPORTANT SAFETY INSTRUCTIONS
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF
UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT ENCLOSURE THAT MAY BE OF A SUFFICIENT MAGNITUDE TO CONSITUTE A RISK OF
ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE PRODUCT.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK
DO NOT EXPOSE THE APPLIANCE TO RAIN OR HUMIDITY
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (inclu-
ding ampliers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two bla-
des with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet,
consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience recepta-
cles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specied by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate nor-
mally, or has been dropped.
WARNINGS
PRECAUTIONS
WARNINGS Read carefully this manual and follow these
precautions before operating the device
Keep this manual for possible future needs
Pay attention not to pour liquids onto the device and do not operate in conditions of excessive humidity
Do not install the device close to sources of excessive heat, do not expose it to direct solar radiation and do not
position it without protection in a dusty environment
Be sure that the main voltage does not exceed the value indicated on the back panel
Do not use the device if the main cable or the plug aren’t in a perfect condition (if necessary, replace it)
If the main cable has to be replaced, the operation must be carried out by qualied personnel. Replace the cable
exclusively with one that is an exact substitute
In order to avoid interference, do not install the device close to power transformers, TV sets, RF transmitters, electric
motors or any source of electric energy
Do not point microphones against speakers: this could generate annoying whistles (Larsen effect) that cause damage
In order to avoid unpleasant and costly inconveniences, use only original connecting cables
To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from the AC socket
When cleaning, do not use solvents (e.g. acetone or alcohol). These could damage the external nishing and the
serigraphy
Do not attempt to service this product. In case of malfunction of any part of the system call the nearest technical
assistance centre or a specialized technical centre
For good ventilation, the heat sink should never be covered or obstructed by blankets, sofas or similar furniture. Be
sure also to leave sufcient clearance between the heat sink and any other surface
No source of ames, e.g. candles, should be placed on or near the device
The device should not be exposed to water, even in small amounts. No object containing liquids should be placed on
or near the device
The device should only be connected to a mains socket outlet equipped with protection ground system
When the device is installed, be sure the mains socket and the plug of the mains cable are easily accessible
INTRODUCTION
TEDDY is Schertler’s latest generation compact stage monitor.
Specially designed to be the perfect on-stage partner, TEDDY provides the performing musician
with 200W of power, without taking any of the limelight: the monitor’s sleek shape and “low
prole” enables it to be placed close to the performer for maximum audibility, without creating a
visible obstacle for the audience.
TEDDY features a coaxial speaker for constant sound directivity, with a specic inclination angle
that makes it ideal for both standing and seated performances.
The monitor’s intuitive control panel includes a single Sensitivity knob (rather than a common
volume control) for adjusting the signal level from -9dB to +6dB. This enables ner regulation of
the signal sent from the mixer. The EQ switch provides two pre-shaped curves for adjusting the
sound, while the Ground Lift switch protects the signal from unwanted ground noise.
XLR input and output connectors allow a chain of several monitors to be created – all connected
to the same audio signal path.
Like all latest generation Schertler ampliers, TEDDY is fully analog.
PRACTICAL ADVICE
When you are using an amplied speaker, one of the most important recommendations is to
avoid at all costs a distorted input signal.
In other words, when you are controlling the sound on your mixer (or any other preamplier), you
must avoid reaching saturation level.
In the case of amplied speakers, the arrival of a distorted signal (square wave) may damage the
internal amplier beyond repair, which may in turn damage the loudspeakers.
Correct use of speakers guarantees their long life.
GND LIFT
RISK OF ELECTRIC SHOCK DO NOT OPEN!
0dB
+6dB
-9dB
TEDDY
www.schertler.com
INPUT
OUTPUT
MADE IN ITALY
VOX
FLAT
MUSIC
EQ
TO REDUCE RISK OF FIRE, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
FOR CONTINUED PROTECTION AGAINST
RISK OF FIRE, REPLACE ONLY WITH THE
SAME TYPE AND RATING OF FUSE.
200 W
CONTROL PANEL
1.1. INPUT
This input is electronically balanced for XLR type connections.
1.2. SENSITIVITY
This knob attenuates the signal to -9dB or boosts it up to +6dB
1.3. EQ
This switch applies a lter to the signal with two pre-shaped EQ curves. Its central position is
“Flat” with no ltering apllied
1.4. OUTPUT
This XLR is a balanced parallel output
1.5. GROUND LIFT
This switch connects and disconnects the ground
1.6. POWER ON/OFF
System ON/OFF switch
1.7. POWER INDICATOR
This LED indicates that the device is ON
1.8. MAIN POWER CONNECTION
Connection to mains (230V AC / 115V AC - 50Hz/60Hz)
PLEASE ENSURE THE PROPER VOLTAGE AND USE THE ORIGINAL CONNECTION CABLE
1.1
1.3
1.2
1.4
1.5
1.6
1.7
1.8
TECHNICAL SPECS
Frequency response...........................................
Sensitivity (1W-1m).............................................
SPL max.............................................................
Woofer................................................................
Horn....................................................................
Crossover...........................................................
Box.....................................................................
Construction.......................................................
System – Format................................................
Max Power out...................................................
Impedance.........................................................
Input Sensitivity..................................................
Weight................................................................
Dimensions.........................................................
Connections.......................................................
Controls..............................................................
80 Hz - 20 kHz
96.5 dBSPL
120 dBSPL
8” Coaxial Woofer
Ferrite magnet circuit
Voice coil diameter 50 mm
Compression Driver
1” Throat
Voice Coil diameter: 25 mm
80°x80° (H x V) horn
Active
-24 dB / octave
Bass reex
Birch laminated
2-way, Bi-amp
200 W / 300 W
50 kΩ @ 1 kHz in balanced mode
XLR 0 dBu (0.775 Vrms) in balanced mode
12 kg.
355 x 220 x 470 mm.
XLR Input, XLR Output
Sensitivity, EQ
NOTES
ALL SCHERTLER® PRODUCTS ARE COVERED BY A LIMITED THREE-YEAR WARRANTY (FROM
THE DATE OF PURCHASE) AGAINST MANUFACTURES DEFECTS. DETAILS CAN BE OBTAINED
FROM YOUR LOCAL DEALER/REPRESENTATIVE. SCHERTLER SA STRONGLY BELIEVES IN
“COMMON SENSE” AND THUS, MISUSE OF OUR PRODUCTS ARE NOT COVERED UNDER
RIGHTS OBTAINED THROUGH OUR WARRANTY POLICY OR THAT OF INTERNATIONALLY
RECOGNIZED TERMS AND CONDITIONS.
SCHERTLER SA IS CONSTANTLY AIMING TO IMPROVE ITS RANGE OF PRODUCTS THEREFORE,
SCHERTLER SA RESERVES THE RIGHT TO AMEND PRODUCT
SPECIFICATIONS WITHOUT NOTICE.
THE SCHERTLER® NAME/LOGO ARE REGISTERED TRADE-NAMES/ TRADEMARKS OF
SCHERTLER SA, SWITZERLAND.
All SCHERTLER® PRODUCTS ARE OF PROPRIETARY TECHNOLOGY AND COVERED BY ONE
OF MORE WORLDWIDE PATENTS.
Table of contents
