SC&T DP01F-4K6G User manual
1
User Manual
DP01F-4K6G-KS
Introduction
DP01F-4K6G is a DisplayPort (DP) extender that overcomes the length restriction of a standard DP cable
using fiber optic cable. The extender can send DisplayPort Video & Audio data with USB, RS232 or
bi-directional IR signal for up to 60km.
Features
Supports DisplayPort 1.2
Supports HDCP 2.2
Resolution up to 4K@60Hz 4:4:4
Working distance up to 60 km, depending on the fiber module that is used.
Supports full-duplex RS232 (115200bps), bi-directional IR (30~60KHz), or 2 ports of USB (keyboard &
mouse only) for remote control transmission, either one.
DP01FT-4K6G could work with HE01FR-4K6G, using DisplayPort as input and HDMI as output.
Application
Working Distance
The distance of the fiber module that SC&T offers.
Optical Module
Max. Distance
Max. Resolution
10G SFP+ Fiber Single Mode
10 km
3840x2160 60Hz
10G SFP+ Fiber Multi Mode
300m
3840x2160 60Hz
2
User Manual
DP01F-4K6G-KS
Panel Viewss
DP01FT-4K6G
No
Interface
Description
1
DisplayPort
Connect to DisplayPort Video Source
2
USB Type-B
Connect to USB Host
3
DIP Switch
Select IR/RS232/Keyboard & mouse Extension
4
LED Indicator
Indicate working status
5
DC Jack
Input 5V 2A Power
6
SFP+
Connect to Single/Multi mode SFP+ module
7
IR Tx 3.5mm
Connect to IR Emitter Cable
8
IR Rx 3.5mm
Connect to IR Receiver Cable
9
RS232
Connect to RS232 Emitter / Receiver Cable
3
User Manual
DP01F-4K6G-KS
DP01FR-4K6G
No
Interface
Description
1
DisplayPort
Connect to DisplayPort Monitor
2
USB Type-A
Connect to USB devices
3
DIP Switch
Select IR/RS232/Keyboard & mouse Extension
4
LED Indicator
Indicate working status
5
DC Jack
Input 5V 2A Power
6
SFP+
Connect to Single/Multi mode SFP+ module
7
IR Tx 3.5mm
Connect to IR Emitter cable
8
IR Rx 3.5mm
Connect to IR Receiver cable
9
RS232
Connect to RS232 Emitter / Receiver cable
4
User Manual
DP01F-4K6G-KS
LED Indicator
LED Indication
LED Color
Status
Power
GREEN On/ Off
Power On/ Off
Connection
BLUE On/ Off
Fiber Linked/ Unlinked
DIP Switch
Follow the instructions below to enable IR, RS232 or keyboard & mouse extension. Please also note that ON
refers to ↓, and OFF refers to ↑
RS232 PIN Define
DB9(Female)
Pin
Define
Pin 2
TX
Pin 3
RX
Pin 5
GND
DB9(Male)
Pin
Define
Pin 2
RX
Pin 3
TX
Pin 5
GND
Switch
Function
SW 1
ON
IR Extension
ON
RS232 Extension
OFF
Keyboard & Mouse
Extension
SW 2
OFF
ON
ON
5
User Manual
DP01F-4K6G-KS
Caution
Using VESA certified DisplayPort cable to transfer high-resolution video is recommended
Power consumption may vary according to the connected USB devices
DO NOT put IR Emitter/Receiver cables too close to each other to avoid interference.
This product is designed for indoor applications. If it is desired for outdoor use, please install
additional equipment for waterproof protection and surge protectors to prevent damage caused by
lighting.
Do not put anything on the power and system cables; place them where they cannot be stepped on.
Please be sure there is nothing resting on any cables.
Avoid using this product close to water places, or near high-temperature devices such as radiators,
stoves, etc.
Shut down the power supply and unplugged all equipment immediately if:
owater or any kind of liquid has been spilled into the product;
othe product has been damaged by external force;
othe product does not operate normally as this manual indicates;
oPlease contact us for further repair if the above conditions happen.
Package Includes
Item
Amount
DP01FT-4K6G
1
DP01FR-4K6G
1
10G SPF+ Single-mode Optical
Transceiver
2
DC5V 2A adaptor
2
USB A/B cable
1
6
User Manual
DP01F-4K6G-KS
Specification
ITEM NO.
DP01FT-4K6G
DP01FR-4K6G
Support
Compliance
DP 1.2, HDCP 2.2
Max. Video Resolution
4K@60Hz 4:4:4
Max. Transmission Distance
60km over single-mode
300m over multi-mode
Audio Format
DisplayPort Audio pass-through
RS232 Baud Rate
115200 bps (Full Duplex)
IR Support
30~60KHz, ±10°, 5M,
Bi-Directional
30~60KHz, ±55°, 5M, Bi-Directional
Ports & Interfaces
Video Input
1 x DisplayPort
1 x SFP 10G+
Video Output
1 x SFP +
1 x DisplayPort
RS232 Interface
1 x DB9(Female)
1 x DB9(Male)
IR Interface
2 x 3.5mm Phone Jack
2 x 3.5mm Phone Jack
USB Interface
1 x USB Type B
2 x USB Type A
Power
Power Supply
DC 5V 2A
Power Consumption
5.5 W (For DP01FR-4K6G, Power consumption may vary according to
the connected USB devices)
Ambient Temperature
Operation
-10 ~ 45℃
Storage
-30 ~ 70℃
Working Altitude
2000m
Humidity
Up to 95%
Physical Characteristics
Dimensions
109.6 x 114.5 x 30mm
109.6 x 114.5 x 30mm
Weight
262g
260g
This manual suits for next models
2
Table of contents
Other SC&T Extender manuals
SC&T
SC&T DP02U-4K6G User manual
SC&T
SC&T 4K HDMI KVM USB/RS232/IR/Analog Audio CAT5e Extender over IP... User manual
SC&T
SC&T VE05AL User manual
SC&T
SC&T IP05I User manual
SC&T
SC&T HE02EIX User manual
SC&T
SC&T HE01ERK User manual
SC&T
SC&T HE02EIXP User manual
SC&T
SC&T IP02 User manual
SC&T
SC&T HE02EIR User manual
SC&T
SC&T Audio Extender Series User manual
Popular Extender manuals by other brands
foxunhd
foxunhd SX-AEX01 operating instructions
TERK Technologies
TERK Technologies LFIRX2 owner's manual
Devolo
Devolo Audio Extender supplementary guide
Edimax
Edimax EW-7438RPn V2 instructions
Shinybow USA
Shinybow USA SB-6335T5 instruction manual
SECO-LARM
SECO-LARM ENFORCER EVT-PB1-V1TGQ installation manual