SCA PLU 637450 User manual

1400W 1500PSI HIGH

PRESSURE WASHER

INSTRUCTIONMANUAL

PLU 637450

CONTENTS

Safety Information................................................................................................3

In The Box............................................................................................................6

Accessories..........................................................................................................8

Assembly.............................................................................................................. 8

Material & Paint Selection............................................................... ...................11

Operating Instruction..........................................................................................12

Maintenace.........................................................................................................15

Troubleshooting..................................................................................................16

Technical Data....................................................................................................17

Warranty..............................................................................................................19

SAFETY INFORMATION

Important - Please read these instructions fully before starting assembly.

WARNING SYMBOLS

Read the manual

Warning

Warning: Do not direct the

jet at persons, animals and

electrical equipment

Machine not suitable for

connection to the potable

water mains

Double insulation

RCM marking

ABN: Australian Business Number. By this number,

business information such as entity type, status,

business location etc. can be found at website http://

abr.business.gov.au.

ABN of Positec Australia Pty Limited is 14 101 682 357

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all instructions.

Failure to follow the

warnings and instructions may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference.

- This machine is not intended for use by persons (including children) with reduced

physical,sensory or mental capabilities, or lack of experience and knowledge.

- Children should be supervised to ensure that they do not play with the appliance.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent

or similarly qualified persons in order to avoid a hazard.

ADDITIONAL POWER TOOL SAFETY WARNINGS

WARNING: Do not use the appliance without reading the instruction sheet.

- Safety boots, safety gloves, safety helmets with visors, hearing protection etc. shall be

worn while operating the machine.

- When opening the trigger gun, there is a danger of the kickback force and the sudden

torque on the spray assembly. Please hold the nozzles tightly.

- WARNING This machine has been designed for use with the cleaning agent supplied or

recommended by the manufacturer. The use of other cleaning agents or chemicals may

adversely affect the safety of the machine.

- WARNING During use of high pressure cleaners, aerosols may be formed. Inhalation of

aerosols can be hazardous to health.

- WARNING High pressure jets can be dangerous if subject to misuse. The jet must not

be directed at persons, live electrical equipment or the machine itself.

- WARNING Do not use the machine within range of persons unless they wear protective

clothing.

- WARNING Do not direct the jet against yourself or others in order to clean clothes or

foot-wear.

- Disconnect from the electrical power supply before carrying out user maintenance

- WARNING High pressure cleaners shall not be used by children or untrained personnel.

- WARNING Risk of explosion – Do not spray ammable liquids.

- WARNING To ensure machine safety, use only original spare parts from the

manufacturer or approved by the manufacturer.

- WARNING: High pressure hoses, ttings and couplings are important for the safety

of the appliance. Use only hoses, ttings and couplings recommended by the

manufacturer

- WARNING Water that has own through backow preventers is considered to be non-

potable.

- WARNING The machine shall be disconnected from its power source by removing the

plug from the socket-outlet during leaning or maintenance and when replacing parts or

converting the machine to another function.

- WARNING Do not use machine if a supply cord or important parts of the machine are

damaged, e.g. safety devices, high pressure hoses, trigger gun.

- WARNING If an extension cord is used, the plug and socket must be of watertight

construction.

- WARNING Inadequate extension cords can be dangerous. If an extension cord is used,

it shall be suitable for outdoor use, and the connection has to be kept dry and off the

ground. It is recommended that this is accomplished by means of a cord reel which

keeps the socket at least 60 mm above the ground.

- The electric supply connection shall be made by a qualied electrician and comply

with AS/NZS 3000. It is recommended that the electric supply to this machine should

include either a residual current device that will interrupt the supply if the leakage

current to earth exceeds 30 mA for 30 ms or a device that will prove the earth circuit.

IN THE BOX

Spray gun

Spray gun holder

On/Off switch

Connection lance

Outlet

Outlet lock knob

Wheels*2

Electric cable

Holder for electric cable

10 Handle

Trigger switch

Hose holder

Inlet water connector

High pressure hose

Nozzle cleaning tool (O ring)

Lance holder fence

Lock-off switch ( See I1)

NOTE: Before using the tool, read the instruction book carefully.

ASSEMBLY

1. Assembling spray gun holder

Press the spray gun holder (2) on to the machine. (Fig. A)

2. Mounting of holder for electric cable

Press the holder for electric cable (9) on to the machine. (Fig. B)

ASSEMBLY

ACCESSORIES

Spray gun 1

Normal nozzle 1

Pressure hose(3M) 1

Soap bottle 1

Spray gun holder 1

Electric cable holder 1

Inlet water connector 1

Connection lance 1

A B

3. Mounting of inlet water connector

Attach inlet water connector (13) to the machine’s inlet. (Fig. C, D)

4. Mounting of adjustable spray nozzle and lance holder

Place the adjustable spray nozzle and lance holder on to the machine, and fix the screws.

(Fig. E)

5. Mounting of handle

Press the handle (10) on to the machine, and fix the screws. (Fig. F1, F2)

C D

F1 F2

6. Assembling the high pressure hose

1) Make sure that on/off switch (3) is in off position. (Fig. G1)

2) Insert the high-pressure hose (14) to spray gun (1). (Fig. G2)

3) Insert the lance into spray gun (1), and twist 1/4 turn. Then insert the adjustable spray nozzle

into the lance, and twist 1/4 turn until rectangular tab appears. (Fig. G3, G4)

4) Connect the high-pressure hose (14) to the high-pressure outlet (5). (Fig. G5)

NOTE: When remove the high-pressure hose from the spray gun (1), firstly press the button,

then take the hose out of the spray gun (1).

G1 G2

G3 G4

Table of contents

Other SCA Pressure Washer manuals

SCA

SCA THW1801 User manual

Popular Pressure Washer manuals by other brands

Shark

Shark RG-232637 Service manual

Shakti Technology

Shakti Technology S3 user manual

Kärcher

Kärcher K 4 Pure manual

Porter-Cable

Porter-Cable D25806-025-2 instruction manual

REM POWER

REM POWER HDEm 662 manual

Landa

Landa HS-3000 Operator's manual

Craftsman

Craftsman 580.752270 Operator's manual

HIKOKI

HIKOKI AW 100 Handling instructions

Delco

Delco DC 1302 instruction manual

Kärcher

Kärcher K 3 Full Control user manual

BIEMMEDUE

BIEMMEDUE 120/10 - 170/13 Use and maintenance manual

ARKSEN

ARKSEN 014-HG-14141-HR Operator's manual

Black & Decker

Black & Decker PW1700SPX manual

Kärcher

Kärcher 595 - SPARE Spare parts

Kranzle

Kranzle B 10 200 operating manual

Stihl

Stihl RE 90 instruction manual

Husky

Husky HU80911 Assembly guide

PowR-Quip

PowR-Quip PQ-2600 Operator's manual