SBM SB-9 User manual
1
Important Safety Information
Always be careful when using the machine. To reduce the risk of fire, electrical shocks, and other injuries, keep
these safety considerations in mind when installing, using, and maintaining your machine:
Stability: Place the machine on a secure, stable surface. The machine can be seriously damaged if it falls.
Power Supply: Provide correct power to the machine, as listed on the back of the machine. If you are not sure
of the type of power that is supplied to your office, call your electric company.
Grounding: If the plug has three prongs, it must be plugged into a grounded (three hole) outlet. Grounded
plugs and outlets are designed for your safety - do not try to make a three-prong plug fit into a two-prong outlet
by modifying the plug or outlet in any way. If you cannot insert the plug into your wall outlet easily, then a
qualified electrician should inspect the outlet.
Overload: Do not plug too many electrical devices into a wall outlet or an extension cord. An overloaded outlet
could be a reason of a fire and electrical shock hazard.
Cleaning: Before cleaning the machine, unplug it from the power outlet. Clean exposed parts with a soft cloth
slightly dampened with water. Do not use aerosol cleaners.
Gas Leaks: Never use any machine close to a gas leak. If you think gas is leaking, call the gas company
immediately. A small electrical spark in the machine could cause a fire or explosion.
2
Precaution
When using the machine, these precautions should always be followed:
1. Never push objects of any kind into your machine through the case or cabinet openings.
2. Do not use your machine near water, in wet locations, or outdoors.
3. Do not allow anything to rest on the power cord, line cord, or PC interface cable. Do not locate your
machine where the cords can be damaged by persons’ walking on them.
4. Do not allow pets to chew on the power cord or PC interface cable.
5. Use supplies or cleaning materials only as directed. Keep all supplies and materials out of the way of
children.
6. The power supply turns this machine on and off. Make sure that your machine is installed near an outlet and
is easily accessible.
7. Never remove covers or guards that require a tool for removal. There are no operator serviceable areas
inside your machine. Refer servicing to authorized service personnel.
8. Never defeats interlock switches. This machine is designed to restrict operator access to unsafe areas.
Covers, guards and interlock switches are provided to ensure that the machine will not operate with covers
opened.
9. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the
instruction.
3
Managing the performance of the machine
This unit has many sophisticated sensors. Without proper maintenance, it cannot last its good performance.
Please read the “Daily Maintenance” section of this manual carefully, and do it everyday. When the performance
is deteriorated on a sudden, please clean all the sensors first before calling a service.
Safety Notes
Your machine and the supplies are designed and tested to
meet strict safety requirements. Included are safety agency
examination and approval and compliance to established
environmental standards. Please read the following
instructions carefully before operating your machine, and refer
to them as needed to ensure the continued safe operation of your machine.
Battery is used for ‘PBA POWERIO’ in this
machine. If wrong date and time are
displayed on LCD after correct setting, it is
necessary to change the battery of ‘PBA
POWERIO’. Please read the following instructions carefully before changing the battery.
WARNING
Hazardous moving parts!
Keep fingers and other body parts away
CAUTION
Risk of explosion: if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
4
Table of Contents
Chapter 1 Installation ---------------------------------------------------------------------------------- 6
Chapter 2 Description of the Parts ---------------------------------------------------------------- 9
Chapter 3 Overview of Control Panel ------------------------------------------------------------ 10
Chapter 4 Overview of Display (LCD) ------------------------------------------------------------ 11
Chapter 5 Getting Started ---------------------------------------------------------------------------- 12
Placing Bills into the Hopper 12
Counting 13
Chapter 6 Basic Operation --------------------------------------------------------------------------- 14
Selecting Count Mode 14
CF Detector On / Off 14
ADD On / Off 16
Batch On / Off 16
Changing Display Contents 17
Grand Total 20
Selecting Currency 21
Dual User 21
5
Chapter 7 Set ‘MENU’ and its Parameters ------------------------------------------------------ 23
User Menu 23
Set Speed of the Machine 24
Set Contrast of Banknotes 25
Set Pocket Capacity 26
Settings 26
PC Interface 30
Sensitivity Setting 30
Parameters 31
Reserved 32
Chapter 8 Troubleshooting -------------------------------------------------------------------------- 33
LCD Error Messages 33
Fixing Problems 34
Chapter 9 Daily Maintenance 35
Chapter 10 Specification ------------------------------------------------------------------------------- 38
6
1 Installation
Unpacking List
1. SB-9 Counter 1 Unit
2. Bill Guide 2 pcs.
3. AC Power Code 1 pc.
4. SB-9 User's Manual 1 pc.
5. Serial Cable 1 pc.
* Optional Items: Printer, Serial to USB A Cable, USB A to USB B Cable
Choosing a Location
To help guarantee trouble-free operation of your machine, place it on a flat, stable surface near your workstation.
Do not place your machine:
In direct sunlight.
Near heat sources or air conditioners.
In dusty or dirty environments.
Handling the Machine
When handling or moving the machine, do not lift with grasping the Reject Pocket. The picture shows how to lift
the machine correctly. Please refer to the pictures on the next page.
7
(X) (X)
(O) Correct way to lift the machine
8
Setting Up Your Machine
Power Cord
Plug one end of the cord into the back of the machine and the other
end into a standard AC power outlet.
If you turn on the power switch, the machine will display version and
checksum. If there is Service Call number saved by a service
provider, the Call number will be displayed.
Printer
Your SB-9 has a serial interface port, which allows you to connect the printer to print out counting result. To
connect the printer to the machine, follow the steps below:
1. Make sure that both the SB-9 and the printer are turned off.
2. Plug the cable of printer into the serial port of SB-9.
3. Turn on the printer and SB-9.
CAUTION
In case that another port is used to avoid
electrical shock, turn off SB-9 and turn on
the machine after Port is connected.
.
9
② Hopper
③ Pocket LED
① Front Cover
④ LCD & Control Panel
⑤ Reject Pocket
⑥ Stacker
⑦ Currency Gate
Adjustment Screw
⑧ Rear Cover Open
Handle
⑨ Power Switch
⑩ AC Inlet
⑪ RJ11
⑬ RS232C
⑫ Lan Port
⑭ USB B ⑮USB A
2 Description of the Parts
10
3 Overview of Control Panel
$ € Select Currency
ADD Accumulated Count On/Off
CF Counterfeit Detector On/Off
BATCH Batch function On/Off
DENOM. Select a denomination
5 (START) In dual user mode:
Counting Start (manual mode) /
Stop key / Transmit data or Print
PRINT Printing the Count
GT Grand Total Display
Menu Change settings or parameters
/ Escape from Menu
▲ Up
▼ Down
MODE Change Mode (Ch. 6)
DISPLAY Change Display Mode (Ch. 4)
START/ENTER Counting Start (manual mode) /
Enter /Stop key /
Transmit data or Print(In dual user mode)
C Clear Errors / Cancel Input
Pocket LED If some notes remain on the
Reject pocket, this LED will be lit.
Other manuals for SB-9
1
Table of contents
Other SBM Cash Counter manuals
