Saurer Melco EMC 1 Installation guide
Basic Maintenance
for Melco
Sewing Peripherals
A Company of Saurer Textile Systems
Part Number 110207-01, Revision B
•Cleaning
•Lubrication
•Hook Timing
For the following peripherals:
•EMC 1
•EMC 6, 6M, 6ML, 6MLT
•EMC 6/4, 6/4M, 6/4MT
•EMC 10, 10T, 10/4, 10/4T
•CH 1
•Advantage 18
1575 West 124th Avenue
Denver, Colorado 80234
United States of America
© Copyright 1995 by Melco Embroidery Systems
ALL RIGHTS RESERVED No part of this publication may be reproduced, stored in
a retrieval system, or transmitted in any form or by any means (electronic,
mechanical, photocopying, recording, or otherwise) without prior written
approval of Melco Embroidery Systems. Melco reserves the right to revise this
publication and to make changes in it at any time without obligation of Melco
to notify any person or organization of such revisions or changes.
All precautions have been taken to avoid errors or misrepresentations of facts,
equipment, or products. However, Melco does not assume, any liability to any
party for loss or damage caused by errors or omissions.
Printed in the United States of America
First Printing: February 1995
Revision B: April 1995
Table of Contents
1. Cleaning
General 1 - 1
Exterior Surfaces 1 - 2
Behind the Electronic Covers 1 - 3
EMC 1, EMC 6M, 6ML, 6MLT, EMC 10, EMC 10T,
CH 1, ADV 18: 1 - 3
EMC 6: 1 - 3
End Cap Removal 1 - 4
EMC 1, EMC 6, 6M, 6ML, 6MLT, EMC 10, EMC 10T
CH 1, ADV 18: 1 - 4
Removing the Rear Covers 1 - 5
EMC 6/4, 6/4M, 6/4MT, EMC 10/4, EMC 10/4T: 1 - 5
Removing the Table Tops 1 - 6
EMC 6/4, 6/4M, 6/4MT, EMC 10/4, EMC 10/4T: 1 - 6
Cleaning the Y-Rails 1 - 7
EMC 1, EMC 6, 6M, 6ML, 6MLT, EMC 10, EMC 10T
CH 1, ADV 18: 1 - 7
EMC 6/4, 6/4M, 6/4MT, EMC 10/4, EMC 10/4T: 1 - 8
Power Supply Fan 1 - 10
EMC 1, EMC 6, 6M, 6ML, 6MLT, EMC 10, EMC 10T
CH 1, ADV 18: 1 - 10
EMC 6/4, 6/4M, 6/4MT, EMC 10/4, EMC 10/4T: 1 - 10
Trimmer Blade and Knife 1 - 11
110207-01, Rev. B
i
Table of Contents
EMC 1, EMC 6MTL, EMC6/4MT, EMC 10T,
EMC 10/4T, ADV 18: 1 - 11
Bobbin Case and Rotary Hook 1 - 12
All Units Except CH 1: 1 - 12
Thread Break Contact Posts 1 - 13
EMC 6, 6M, 6ML, 6MLT, EMC6/4M, EMC6/4MT: 1 - 13
EMC 10, EMC 10T EMC 10/4, EMC 10/4T: 1 - 14
Replacing Other Thread Tensioner Parts 1 - 15
2. Lubrication
General 2 - 1
Lubricating The Sewing Head 2 - 2
Rotary Hook 2 - 3
Needle Bar 2 - 4
EMC 1, ADV 18: 2 - 4
EMC 6: 2 - 5
Basic Maintenance
ii
Melco Embroidery Systems
EMC 6M, EMC 6ML, EMC 6MLT, EMC 6/4M,
EMC 6/4MT: 2 - 6
EMC 10, EMC 10T EMC 10/4, EMC 10/4T: 2 - 7
Needle Bar Driver 2 - 9
EMC 1, ADV 18: 2 - 9
EMC 6: 2 - 10
EMC 6M, EMC 6ML, EMC 6MLT, EMC 6/4M,
EMC 6/4MT: 2 - 11
EMC 10, EMC 10T, EMC 10/4, EMC 10/4T: 2 - 12
Upper Connecting Rod 2 - 13
EMC 1, ADV 18: 2 - 13
EMC 6, EMC 6/4: 2 - 13
EMC 6M, EMC 6ML, EMC 6MLT, EMC 6/4M,
EMC 6/4MT: 2 - 14
EMC 10, EMC 10T, EMC 10/4, EMC 10/4T: 2 - 15
Lower Connecting Rod 2 - 16
All Units Except CH 1: 2 - 16
Take-Up Lever Cam 2 - 18
EMC 1, EMC 6M, EMC 6ML, EMC 6MLT,
EMC 6/4M, EMC 6/4MT: 2 - 18
EMC 10, EMC 10T, EMC 10/4, EMC 10/4T: 2 - 19
Linear Bearing 2 - 20
EMC 6, EMC 10, EMC 10T, EMC 10/4, EMC 10/4T: 2 - 20
The Color Change Cam 2 - 21
110207-01, Rev. B
iii
Table of Contents
EMC 6, EMC 6M, EMC 6ML, EMC 6MLT,
EMC 6/4M, EMC 6/4MT, EMC 10, EMC 10T,
EMC 10/4, EMC 10/4T: 2 - 21
The Pantograph 2 - 22
EMC 1, EMC 6, EMC 6M, EMC 6ML, EMC 6MLT,
EMC 10, EMC 10T, CH 1, ADV 18: 2 - 23
The Pulley Assembly 2 - 24
The X-Carriage Rollers 2 - 26
The Y-Rails 2 - 27
Trimmers 2 - 28
General 2 - 28
EMC 6MLT, EMC 6/4MT: 2 - 29
EMC 10T, EMC 10/4T: 2 - 30
The Rear of Head Trimmer Parts 2 - 31
The Front Of Head Trimmer Parts 2 - 32
EMC 6MLT, EMC 6/4T, EMC 10T, EMC 10/4T 2 - 32
3. Hook Timing
General 3 - 1
Head Timing 3 - 2
Machine Out Of Timing 3 - 3
Setting Timing 3 - 4
General 3 - 4
EMC 10, EMC 10T, EMC 10/4, EMC 10/4T, ADV 18: 3 - 4
Needle Depth Check/Adjustment 3 - 5
Basic Maintenance
iv
Melco Embroidery Systems
Hook Timing 3 - 8
Checking Hook Timing 3 - 9
Adjusting Hook Timing 3 - 11
Under Thread Control (UTC) Adjustments 3 - 14
When To Call For Service 3 - 16
110207-01, Rev. B
v
Table of Contents
This page intentionally left blank.
Basic Maintenance
vi
Melco Embroidery Systems
1. Cleaning
General
Regular maintenance will prolong the life of any embroidery peripheral, as well as
also minimize down-time and lost production time. A properly maintained machine
will perform better, last longer, and help to create a higher-quality product.
To maintain the machine’s operating condition, certain cleanings must be performed
on a regular basis. This section will cover all routine cleaning that is required prior to
any lubrication. Lubricating a dirty machine will only make a mess.
For further information on adjustments and repairs that are not covered in
this basic manual, consult your particular machine’s technical manual or call
your local area service representative for advice.
1-1
110207-01, Rev. B 1. Cleaning
Exterior Surfaces
Cleaning of the outer surfaces, while not important to the machine’s operation, is an
aesthetic consideration for the looks of the equipment. DO NOT use strong, harsh
detergents such as powdered cleansers or "all-purpose cleaners" for cleaning the
plastic or painted parts of your machine. You MAY use mild cleaners like "Fantastik
Spray Cleaner" or a mild detergent soap solution. Use a soft, clean cloth to wipe the
surfaces. Wring out any excess liquid from the cloth before using.
WARNING! Do Not Apply Any
Cleaning Fluids While The Machine Is
Running Or The Power Is On!
CAUTION! If an accidental spill should occur,
mop up the fluid with a clean cloth and allow
the machine to dry before turning the power
ON. If any fluid entered either the controller or
computer, it will require removing the covers to
gain access to the interior. Contact your local
service representative for recommendations
before proceeding.
Multi-head machines will also benefit from a regular application of
automotive wax to the tabletop surfaces. Not only will this help to maintain
a cleaner surface, it will also allow the hoops and garments to slide more
easily.
1-2 Exterior Surfaces
Basic Maintenance Melco Embroidery Systems
This manual suits for next models
13
Table of contents
