Satel INT-TSG User manual
int-tsg_oi_en 05/15
Keypad
INT-TSG
Firmware version 1.03
INTEGRA / INTEGRA Plus
Brief System User Manual
SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND
tel. 58 320 94 00
www.satel.eu
WARNINGS
Please read this manual carefully before use.
Changes, modifications or repairs not authorized by the manufacturer shall void your rights
under the warranty.
SATEL's goal is to continually upgrade the quality of its products, which may result in
alterations of their technical specifications and firmware. The current information on
the introduced modifications is available on our website.
Please visit us:
http://www.satel.eu
The declaration of conformity may be consulted at www.satel.eu/ce
The following symbol may be used in this manual:
- note.
We are pleased that you have chosen a product offered by us. We wish you satisfaction with
your choice and would like to assure you that we are always ready to provide professional
assistance and information on our products.
SATEL Ltd. is a manufacturer of a wide variety of dedicated devices for use in alarm
systems. Additional information can be found on our website www.satel.eu or at points of
sale offering our products.
1. Keypad description
1.1 LED indicators
LED Color Description of indications
yellow blinking – trouble or trouble memory (the LED goes off when the
partitions operated by the keypad are armed)
green ON – all partitions operated by the keypad are armed
blinking – some partitions operated by the keypad are armed or exit
delay countdown is running
green blinking – service mode is entered
red ON or blinking – alarm or alarm memory
Information about the armed state can be extinguished after a time period defined by
the installer.
If the installer has enabled the GRADE 2 (INTEGRA) / GRADE 3 (INTEGRA Plus) option:
the LED will indicate alarms only after user authorization (entering the code);
blinking of the LED means that there is a trouble in the system, some zones are
bypassed, or that there was an alarm.
2 INT-TSG SATEL
1.2 Touch screen
The screen enables communication between the user and the alarm system. It displays
information about the system status, while allowing you to operate and program the alarm
system, as well as control the home automation equipment. Intuitive icon-based menu makes
the everyday use easier. The keypad offers two operating modes:
graphical mode – large icons are displayed without description,
verbose mode – small icons are displayed with description.
To change the operating mode, use the following icons:
– tap to switch over the screen to the verbose mode,
– tap to switch over the screen to the graphical mode.
This manual describes how to operate the keypad, based on the graphical mode.
Tapping an icon or icon description will display the next screen or start the specified function.
The icon will bring you back to the previous screen. Tapping the icon will display the
main screen.
After 10 minutes of keypad inactivity, the screen saver is displayed (slide show or clock) or
the screen goes blank (the mode of operation is to be defined by the installer).
Tapping the screen when it is blank or the screen saver is displayed will wake up the keypad.
The keypad can also be woken up e.g. on opening the door, detecting motion by a detector
etc. The installer defines the content which is to be displayed after the keypad wake-up
(status screen, main screen or start of the disarming procedure).
During the keypad inactivity period, messages about arming/disarming, entry/exit delay
countdown, alarm etc. can be displayed on the screen.
1.2.1 Slide show
The slide show can be displayed as the status screen background or the screensaver. The
pictures to be displayed should be saved to a microSD memory card, which will be put into
the keypad by the installer. The installer defines the speed at which the pictures will change
during the slide show.
1.2.2 Status screen
SATEL INT-TSG 3
The status screen is displayed 60 seconds after the last operation performed on the keypad
screen, unless the terminal is running (see p. 13). When the terminal is displayed, the status
screen may appear later or even not appear at all (e.g. when the service menu is open).
If the user is logged in, he/she will be automatically logged out a few seconds after the
status screen is displayed.
Information presented on the status screen
The keypad with factory settings presents the date and time on the status screen. The
installer can customize the information displayed to suit the user needs. Information on the
state of selected partitions, zones or outputs, temperature taken by selected temperature
detectors, date and time, as well as any text, can be presented on the status screen.
Icons illustrating the state of partitions are described in section “Partition status” (p. 8).
Icons illustrating the state of zones are described in section “Zone status” (p. 9).
Icons illustrating the state of outputs are shown in the table below.
Icon Color Output status
grey deactivated
red activated
Additional messages, connected with occurrence of specific events (e.g. arming or disarming,
auto-arming delay countdown, entry / exit delay countdown, alarm, etc.), may also appear on
the status screen.
Functions available from the status screen
Tapping the status screen will display the main screen.
The keypad can be configured by the installer so as to display the macro commands
assigned to a corresponding group on tapping the corner of status screen. The illustration
below shows the screen parts, the tapping of which can display macro commands (the digit
corresponds to the number of macro command group). Icons of macro command groups can
be displayed there.
Pressing any part of the status screen for 3 seconds may trigger the silent panic alarm.
Whether or not this function will be available is to be defined by the installer.
4 INT-TSG SATEL
Status screen background
A single picture or a slide show can be displayed as the status screen. The status screen
background is to be configured by the installer.
1.2.3 Main screen
Presented on the main screen are:
date and time in the format defined by the installer (if some specific events occur, other
messages can be displayed, instead of the date and time, e.g. entry or exit delay
countdown, alarm messages, etc.);
name of the currently logged user;
icons enabling operation of the keypad and alarm system.
Icon Function
Informs you that no user is logged in.
User login.
Informs you that a user is logged in (name of the currently logged user is
displayed below).
User logout.
Displays the “Arming” screen (see pages 5and 14).
Enables disarming / alarm clearing (see pages 6, 16 and 17).
Enables control of the alarm system and home automation devices (see p. 6).
Displays the “System status” screen (see p. 8).
Displays the “Emergency” screen (see p. 10).
SATEL INT-TSG 5
Displays the “Advanced” screen (see p. 11).
1.2.4 Authorization screen
Some screens and functions may only be available after user authorization. The authorization
is code based. Use the number keys to enter the code and then confirm, tapping the
icon.
By default, the following codes are preprogrammed in the control panel:
service code: 12345
object 1 master (administrator) code: 1111
If you make a mistake when entering the code, tap and re-enter the code (if you fail to
enter the valid code within one minute, information on entering a wrong code will be saved to
the control panel memory).
1.2.5 “Arming” screen
6 INT-TSG SATEL
Icon Function
Enables arming in mode “full”.
Enables arming in mode “full + bypasses”.
Enables arming in mode “without interior”.
Enables arming in mode “without interior and without entry delay”.
1.2.6 “Alarm clearing / Disarming” screen
The “Alarm clearing / Disarming” screen will be displayed after you tap the icon on the
main screen, when there is an alarm (alarm memory) and at least one partition is armed.
Icon Function
Enables alarm clearing.
Enables disarming.
1.2.7 “Control” screen
The “Control” screen will be displayed on tapping the icon on the main screen, if macro
commands are assigned to at least two groups of macro commands. It presents the groups
of macro commands. Up to 4 groups can be programmed by the installer. Tapping a group
SATEL INT-TSG 7
icon will display macro commands assigned to that group. Up to 16 macro commands can be
assigned to one group.
If macro commands are assigned only to one group, tapping the icon will display the
macro commands at once. In the keypad with factory settings, two macro commands are
programmed and assigned to the first group (the figure below shows the screen to be
displayed on a keypad with factory settings).
The control panel will execute the factory programmed macro commands, provided
that the alarm system is suitably configured by the installer.
You should consult the installer about which additional macro commands would
facilitate operation of the alarm system or control of the home automation devices
connected to the control panel. Only the installer can program any additional macro
commands.
Icon Function
Quick full arming (without user authorization by using a code) – in a similar way
as after pressing the 0 keys on the keypad with text menu.
Exit delay clearing – in a similar way as after pressing the 9 keys on
the keypad with text menu.
The keypad can be configured by the installer so as to start the function of output control
from the terminal on tapping the icon (tapping and holding the icon for about 3 seconds
may be required).
8 INT-TSG SATEL
1.2.8 “System status” screen
Icon Function
Displays the “Partition status” screen.
Displays the “Zone status” screen.
Displays the “Troubles” screen, on which the current troubles are presented
(the installer can configure the control panel to display the troubles until
cleared).
Enables viewing the event log.
Displays the “Alarm log” screen, on which alarms stored in the control panel
memory are presented.
Displays the “Trouble log” screen, on which troubles stored in the control panel
memory are presented.
When viewing the log of events, alarms or troubles, the icon is available at the
top of the screen. Tapping the icon will toggle the information presentation mode: light
grey / color font (and the other way round).
Partition status
The status of partitions is illustrated by means of icons. Tap the icon situated at the top of
the screen to see description of all icons. The number shown next to the icon corresponds to
the partition number. On tapping the icon, the full partition name will be presented at the
display bottom.
Other manuals for INT-TSG
5
Table of contents
Other Satel Keypad manuals
Satel
Satel MKP-300 User manual
Satel
Satel INTEGRA INT-TSH2 User manual
Satel
Satel INT-SK User manual
Satel
Satel INT-TSG User manual
Satel
Satel INT-SCR-BL User manual
Satel
Satel CA-6 KLED User manual
Satel
Satel INT-TSI User manual
Satel
Satel INT-SCR User manual
Satel
Satel INT-S User manual
Satel
Satel INT-KSG Instruction manual
Satel
Satel abax2 User manual
Satel
Satel CA-6 KLED-S User manual
Satel
Satel ABAX 2 User manual
Satel
Satel INT-SCR User manual
Satel
Satel INT-TSG2 User manual
Satel
Satel CA-6 KLED User manual
Satel
Satel PRF-LCD-WRL User manual
Satel
Satel INT-TS User manual
Satel
Satel INT-KWRL User manual
Satel
Satel INT-SCR-BL User manual
