Sapido RB-1602 User manual
w
w
w
.
s
a
p
i
d
o
t
e
c
h
.
c
o
m
Quick Installation Guide (V2.1)
Quick Installation Guide (V2.1)
Applicable Model:RB-1602/RB-1632
RB-1132V2/MB-1132/MB-1112
Default IP:
192.168.1.1 (Router Mode)
192.168.1.254 (AP Mode)
192.168.1.254 (WiFi AP Mode)
Default Username：admin
Default Password：admin
Important Information
※
Press the Reset button to set the router back to factory settings while forgetting
the users name and password.
※
We suggest using WiMAX modem with a USB extended cable for the best performance.
※
When you switch the mode, please unplug power adapter and plug in again.
Frequently Asked Questions
FAQ
23-24
1-5
6-7
8
8- 9
10-11
12-13
14-15
16-17
18-19
20-21
22
23
Configuration
Basics
Table of Contents
Getting to Know your Router
Installing the Router
Logging into your Router
Connecting this Router to a Cable/DSL Modem
Connecting this Router to a 3G/4G modem
Connecting this Router to a Smartphone
Connecting this Router to a WiMAX modem
Connecting to an Existing WiFi Network(Public WiFi)
Connecting to an Existing Wired IP Router
Connecting to Another WiFi network to extend the Signal
Optional Firmware Upgrade
Resetting Your Router back to Factory Settings
1
Mini USB
Power Connector
WAN/LAN Port
This connects to your
DSL/Cable Modem.
LAN Port
Use this port to connect
to your computer.
Mode Switch
Getting to Know your Router
1 Router, 1 Power Adapter,
1 Antenna (Detachable),
1 Quick Installation Guide
RB-1602
WAN/LAN Indicator
LAN Indicator
Wireless/WPS Indicator
When the light is green,
wireless is active. When
this light starts to flash
and turns to reddish orange,
WPS setup is in progress
Reset
Back to factory setting.
WPS Button
Status Indicator
When the green light is on,
system is ready to work. When
the light is blinking means
reset or firmware update is
in progress.
See the WPS one-button
setup section for additional
information.
2
RB-1632
Getting to Know your Router
1 Router,
1 Power Adapter,
1 Quick Installation Guide
WAN/LAN Port
This connects to your
DSL/Cable Modem.
LAN Port
Use this port to connect
to your computer.
Mini USB
Power Connector
Mode Switch
USB port
Use this port to connect a
3G/4G/WiMAX modem or
smartphone
Status Indicator
When the green light is on,
system is ready to work. When
the light is blinking means reset
or firmware update is in progress.
WPS Button
See the WPS one-button
setup section for additional
information.
WAN/LAN Indicator
LAN Indicator
Reset
Back to factory setting.
When the light is green, wireless is
active. When this light starts to flash
and turns to reddish orange, WPS setup
is in progress.
Wireless/WPS Indicator
3
RB-1132V2
Getting to Know your Router
1 Router, 1 AC plug,
1 Power Adapter,
1 Quick Installation Guide
Mini USB
Power Connector
Wireless/WPS Indicator
LAN Indicator
WAN/LAN Indicator
Status Indicator
When the green light is on,
system is ready to work. When
the light is blinking means reset
or firmware update is in progress.
Power Indicator
When the light is green,
the device is receiving
power.
USB port
Use this port to connect a
3G/4G/WiMAX modem or
smartphone.
LAN Port
Use this port to connect
to your computer.
LAN/WAN Port
This connects to your
DSL/Cable Modem.
WPS Button
See the WPS one-button
setup section for additional
information.
Reset
Back to factory setting.
Mode Switch
AC Plug
When the light is green, wireless
is active. When this light starts to
flash and turns to reddish orange,
WPS setup is in progress.
4
MB-1132
Getting to Know your Router
1 Router, 2 Li Batteries,
1 Power Adapter,
1 Quick Installation Guide
Power
Connector
Mini USB
Power Connector
LAN/WAN Port
This connects to your DSL/Cable
Modem or computer.
USB Port
Use this port to connect a
3G/4G/WiMAX modem or
smartphone.
USB Indicator
Wireless/WPS Indicator
When the light is green, wireless
is active. When this light starts to
flash and turns to reddish orange,
WPS setup is in progress.
Power Indicator
Status Indicator
LAN/WAN Indicator
Power Switch
Reset
Back to factory setting.
When the green light is on,
system is ready to work. When
the light is blinking means
reset or firmware update is
in progress.
When the light is green,
the device is receiving
power.
WPS Button
See the WPS one-button
setup section for additional
information.
5MB-1112
Power
Connector
Mini USB
Power Connector
WPS Button
LAN/WAN Port
This connects to your DSL/Cable
Modem or computer.
USB Port
only for power output
Power Switch
Getting to Know your Router
1 Router, 2 Li Batteries,
1 Power Adapter,
1 Quick Installation Guide
SIM Slot
3.5G Indicator
Wireless/WPS Indicator
When the light is green, wireless
is active. When this light starts to
flash and turns to reddish orange,
WPS setup is in progress.
Power Indicator
Status Indicator
LAN/WAN Indicator
Reset
Back to factory setting.
When the green light is on,
system is ready to work. When
the light is blinking means reset
or firmware update is in progress.
When the light is green,
the device is receiving
power.
See the WPS one-button
setup section for additional
information.
6
Installing the Router
DSL/Cable Modem:
Applicable Model : RB-1602/RB-1632/RB-1132V2
1. Use Ethernet cable to connect the modem and the
WAN port of SAPIDO router.
2. Use Ethernet cable to connect PC and LAN port of
the SAPIDO router.
Applicable Model : MB-1132/MB-1112
1. Use Ethernet cable to connect the modem and
the LAN/WAN port of SAPIDO router.
2. Connect PC and the SAPIDO router wirelessly.
3G/4G/WiMAX modem:
1.Connect the 3G/4G/WiMAX modem to the SAPIDO
router using a USB cable.
2.Use Ethernet cable to connect PC and LAN port of
the SAPIDO router.
Smartphone:
1.Use a USB cable to connect the smartphone to the
SAPIDO router. See the smartphone section for
additional information.
2.Use Ethernet cable to connect PC and LAN port of
the SAPIDO router.
Ethernet Cable
Ethernet Cable
Ethernet Cable
Wired xDSL/Fiber/
Cable Modem Ethernet Cable
Ethernet Cable
Wired xDSL/Fiber/
Cable Modem
Ethernet Cable
Ethernet Cable
Plug into
USB port
Plug into USB port
Ethernet Cable
Ethernet Cable
Plug into
USB port
Plug into USB port
7
Connecting to an Existing WiFi Network (Public WiFi):
1.No physical connection is required to receive the signal.
2.Use Ethernet cable to connect PC and LAN port of the SAPIDO router.
WiFi Hotspot
Wireless Modem
Ethernet Cable
Ethernet Cable
Connecting to Another WiFi network to extend
the Signal:
1.No physical connection is required to receive the signal.
2.Use Ethernet cable to connect PC and LAN port of the
SAPIDO router.
Wireless Router
Ethernet Cable
Ethernet Cable
Connecting to an Existing wired IP router:
1.Use an Ethernet cable to connect the WAN port
of the SAPIDO router to the existing wired IP router.
2.Use Ethernet cable to connect LAN port of the
SAPIDO router and the computer.
Ethernet Cable
Ethernet Cable
Ethernet Cable
Wired IP Router
Ethernet Cable
Other manuals for RB-1602
1
This manual suits for next models
4
Table of contents
Other Sapido Wireless Router manuals
Sapido
Sapido BR476n User manual
Sapido
Sapido BRB72n User manual
Sapido
Sapido RB-6132 User manual
Sapido
Sapido GR297n User manual
Sapido
Sapido BR261c User manual
Sapido
Sapido BRF71n User manual
Sapido
Sapido GR-1733 User manual
Sapido
Sapido RB-1632 User manual
Sapido
Sapido RB-1602G3 User manual
Sapido
Sapido WSG70n User manual
Sapido
Sapido RB-1830 User manual
Sapido
Sapido GR-1102 User manual
Sapido
Sapido RB-1632 User manual
Sapido
Sapido BRE70n User manual
Sapido
Sapido RB-1602 User manual
Sapido
Sapido GR-1102 User manual
Sapido
Sapido RB-1232V2 User manual
Sapido
Sapido RB-1602G3 User manual
Sapido
Sapido MB-1112 User manual
Sapido
Sapido RB-1602G3 User manual
