Sanyo C20PE70 User manual

INSTRUCTION MANUAL

Colour Television

FILECOPY

C20PE70

C20ZE70

C21

PM40

ZM40

PM45

ZM45

,................................

...................................

......................................

........................................

.................... 15>

Remote Control

Special Function

AV Input and Output Terminals

Model C21 PM45, C21 ZM45 –Equipped with the Teletext Decoder.

Contents

Aerial Connection ......................................................... 2

Warnings and Precautions ........................................... 3

Controls ........................................................................ 4

General Operation ........................................................ 5

Special Functions .......................................................... 9

Tuning of the Channels ................................................. 12

Teletext Usu(Model C21 PM45, C21ZM45 only) .......... 14

Connecting other Equipment ........................................ 19

Specifications ................................................................ 21

Battety installation (Remote Control Transmitter) ....... 21

Electric Mains

The receiver is designed to operate on an A.C. mains

SUPP!Y Of 220- 240vOhS 50Hz.

A---- ●

Telescopic aerial

(Model C20PE70 onfi To the aerial socket

I-Telescopic aerial

“[-] m1-1 “~~ /

‘=nnpmunnimnmom~/

Inl n/

$/Connect the cable with aplug from a

UHF (or VHF) aerial to the aerial socket

on the cabinet back.

~;”

For all aerial circuit problems please consult your local

l;aerial socket dealer.

–2–

Warnings and Cautions

\IAWarning

High voltages are used in the operation of this television

+receiver. Do not remove the cabinet back from your set.

~—

c’” Refer servicing to qualified service personnel.

AWarning

To prevent fire or electrical shock hazard, do not expose

the television receiver to rain or moisture.

~Warning

Do not drop or push objects into the television cabinet

slots or openings.

Never spill any kind of liquid on the television receiver.

4!!!

l! A

fCaution

●

When the television receiver is not used for an extended period

of time, it is advisable to disconnect the AC power cord from

.1 /11 the AC outlet.

)...

t..

-,. .

,‘,

.. ;

ICaution

●

Avoid exposing the television receiver to direct sunlight and

other source of heat.

Do not stand the television receiver directly on other products

which give off heat. E.g. video cassette players, audio

amplifiers.

. . . A

ICaution

●

Do not block the ventilation holes in the back cover.

Adequate ventilation is essential to prevent failure of electrical

components.

ICaution

●

Do not squash power supply cord under the television receiver.

–3–

Controls

Stand-by and Power

Indicator

Remote Control

Detector

II Mains ON/OFF

ASwitch

,,,,,,..........................

,.,.,.,,,.........................,. A

,.,.,.,.,.,,,,,,,,,.,.,.,.,.,.,.,.,.,.,. II

..................,,,.,.,.,.,.,.,.,.,.,.,

,.,.,.,.,.,.,.,.,,,,,.,.,.,.,.,.,.,.,.,.,

,.,.,.,.,.,.,.,...................,.,.,., PI

,.,.,,..,.,.,...........................,

,.,.,.,.,.,.,.,.,.,,,.,.,.,.,.,.,.,.,.,.,

P—M AUTO

TART 1

-A+ VPA

%’ Pw+

MEMORYI

‘PRESET

Remote Control

–4–

General Operation

To switch on or off the TV; To set the TV to standby mode;

Press the Mains ON/OFF ~

button.

The power of the TV is turned on,

or off completely.

tmE=’

..:.:.:.:.:.:.:7:.:.:.:.:.:.:.: ..................

~._.P+”

lw~ P*P

Press the Power ON/OFF button ~.

To turn on theTV, press again.

Important !

Be sure to set the Mains ON/OFF switch ~to the off position, if

the power failure occurs while viewing.

To turn on the TV from standby

mode;

Press &

Power ON/OFF 4ED

(remote control transmitter)

Programme UP/DOWN o

(remote control transmitter)

1to 9,0 Key

(remote control

transmitter)

vVPA

(k?

Programme

UP/DOWN ~

(TV set)

AUTO SHUT OFF

This TV set incorporates the AUTO SHUT OFF function.

Remaining time

Even if the TV is left on after you have gone to sleep, the TV set changes

to the standby mode within 10 minutes after all broadcasts have ended. 29

–lo

To select aprogramme directly

Programn

Selector

Digit

For example;

‘To select aprogramme 8\

,6 J8

)

To select aprogramme 10 1

“-- Press the Digit ~key. ‘

&1—— ?&?& ,.,]

To select aprogramme 27

1“-

...

&-&q?& 27,

–5–

General Operation

To select achannel

Remote Control Transmitter

To adjust the sound volume

P—M

’39’

Front controls of the TV

Programme

UP/DOWN

.EVEL or

ASOUND

111111 ---------

-0

RECALL ‘ff’imer

Screen display disappears after

about 5seconds.

Press the ALTERNATE @key, and the programme position

alternately select the previous position and the present position,

“.~’.’.’.., ..,,.,, ,,, ,,, ,, .,.,.,, ,.:..

.... ...... ,,,,~~;:

:.:.~.:.:.:.: u.:.:.:.:.:. ,,, ,,,

,.,.,. ,.,.,

,.,.,. ,.,.

‘~ +--- Tv/m P+P

0000

PHI u

-9

ALTERNATE

–6–

‘i”FF

I4I2

For example, now you are watching programme position

“4 but you watched programme position”2 previously. If

you press the ALTERNATE key, programme position “2”

immediately appears.

General Operation

Should you wish to mute the sound (e.g. While talking on

the telephone), press the SOUND MUTE @key.

@SOUND MUTE

ASOUND MUTE

111111 ---------

To switch the sound back on,

press SOUND MUTE key again.

The TV set will be turned off after about 30, 60, 90 or 120 minutes.

Press the OFF TIMER ~key. l--+

No off timer

l-,()+

After 30 minutes k

After 60 minutes

IQTp°FFT’MER After 120 minutes After 90 minutes

Just one minute before switching off the TV, ”–01”

To cancel the OFF TIMER and channel number will be displayed on the

Press the OFF TIMER key until” ––” appears.

I1II

This function lets you store the settings (for colour, brightness, contrast, sharpness, sound volume)in memory for both

picture and the sound, and these setting levels can be recalled by pressing the NORMALIZATION @key of the remote

control transmitter.

To store the picture and sound settings

(1)Set the picture and sound to the desired levels. —> ASOUND

111111 --------- etc.

(2) Press the MEMORY/PRESET 0Qbutton while the control function display is still visible on the screen.

NOTE: The control settings will not be saved if the MEMORY button is pressed after the control function display has

left the screen.

..,.,.,

.:.:

F@ +.+ w= P*P

@~kd

Press the NORMALIZATION @key.

mThe colour, brightness, contrast, sharpness and

NORMALIZATION sound volume settings which you stored using the

MEMORY button are recalled.

–7–

General Operation

(1) Select the adjustment item using the FUNCTION @key. (2) Adjust using the LEVEL @+and –key.

. . . . . . .. ................

FUNCTiON

(Front controis of the TV) *

P—M AUTO

TART ,

-4+ VPA

@~’y ‘%#’ g@*

P—M

Each time the FUNCTION ~key is pressed, function choice will change as follows;

@COLOUR

11111111111----

Coiour intensity

~BRIGHT

11111111111 ----

Brightness

EK 3

OCONTRAST

11111111111----

Contrast

+Ii3ZSHARPNESS

------- t-i-----

Dispiay off Fine tuning Sharpness

(Operative for TV mode only)

–8–

Special Functions

You can set the special functions by inputting the special codes using the RECALL@ key and the Programme Selectorm

of the remote control transmitter.

Special codes and special functions are as follows

S::px$l Special functons

SP 00 Reset all special functions (The start condition for the TV power is changed to the standby start).

SP 01 Reset all special functions.

SP 30 Cancellation special code “31”.

SP 31 Maximum volume level setting and prohibition of channel tuning function.

SP 40 Setting of the startup condition for the lV programme.(Always switched on in previous programme position)

SP 41 Setting of the startup condition for the TV programme. (Always switched on in programme position”1” )

SP 42 Setting of the startup condition for the TV programme. (Always switched on in programme position”2 )

SP 43 Setting of the startup condition for the TV programme. (Always switched on in programme position”3 )

SP 44 Setting of the startup condition for the TV programme. (Always switched on in programme position “4” )

SP 45 Setting of the startup condition for the TV programme. (Always switched on in programme position “5” )

SP 46 Setting of the startup condition for the TV programme. (Always switched on in programme position “6” )

SP 47 Setting of the statt up condition for the TV programme. (Always switched on in programme position “7” )

SP 48 Setting of the startup condition for the TV programme. (Always switched on in programme position”8 )

SP 49 Setting of the startup condition for the TV programme. (Always switched on in AV mode)

SP 50 Change of the start condition for the TV power (Setting to the standby start).

SP 51 Change of the start condition for the TV power (Setting to the normal statt).

SP 60 Cancellation special function 61.

SP 61 Suppression of the auto shut off function.

Note: Special functions are not cancelled when the power is turned off or when the AC power plug is disconnected from

the mains.

IExample: To input special code “49” (The input method is the same for all the special codes.)

(1) Press and hold the RECALL @key for more

than 3seconds.

EtaT

:wv.:.:.:.:.:.:.:.:ytw:A.:.:.:.:.:.:.:.

:(—]:

.......... .... ...,,

..:.”.”.”.”.”.’.+::::wiM:,:,”,”.” ........

................ w-...:

~RECALL

LI”EI

fi2) Press” 4” key, next press” 9” key.

:.::ti:sv:~:::~“~A::~

f-%-————a

,.,.,

,.,..

SP49

(3) Press MEMORY/PRESET ~button of the TV set.

-9–

Special Functions

■When “SPO1”is input, all special functions are reset.

9When “SPOW’ is input, all special functions are cancelled, and the start condition for TV power is changed to the

standby start condition, meaning that the picture will not appear even when the mains ON/OFF switch ~is set at the

on position. To turn on the TV set from the standby mode, press the Power ON/OFF~,Programme UP/DOWN ~or

Programme Selector ~key.

“SP31” is used to set alimit for the maximum volume level while keeping the current preset programme position in

memory.

When “SP31” is entered, the volume output at the time of entering the code is placed in the memory as the maximum

volume level. In other words, with this code it is possible to set the maximum volume at your preference. Entering this

code automatically suppresses the preset function, so that even if the preset button is pressed, the preset mode will

remain inactive.

(1)Set the disirable volume level using the LEVEL~ key.

~LEVEL

(2) Input “SP31”. 7The volume level set in this

procedure will be memorized

aSOUND as the maximum volume level.

11111111-----”

To cancell “SP 31”, input “SP 30”.

When “SP 50” is entered, the start condition of the TV power is set to the standby start condition, meaning that the picture

will not appear even when the Mains ON/OFF switch ~is set at the on position(The TV set remains in standby mode).

To return the TV’s power start condition to its original condition(normal start condition), input “SP51”.

When “SP 61” is entered, the auto shut off function is suppressed.

?:J:%X[H (n

<29

–lo

To cancell “SP61”, input “SP60”.

–lo-

This manual suits for next models

Table of contents

Other Sanyo TV manuals

Popular TV manuals by other brands

Philips

Philips Colour Television Service manual

Toshiba

Toshiba 27A10 owner's manual

Philips

Philips 42PF9630A/37 user manual

Hitachi

Hitachi 32FX48B operating guide

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Service manual

Changhong Electric

Changhong Electric uhd55b6000is Operation manual

Philips

Philips Matchline 21CE7551 operating instructions

Panasonic

Panasonic Genus TX-G10 operating instructions

Toshiba

Toshiba 19A20 Service manual

Philips

Philips 25PT4523-16 manual

Sony

Sony XBR-100Z9D reference guide

Philips

Philips PR0930X3 owner's manual

Philips

Philips Brilliance 231P4QPY user manual

Samsung

Samsung 55S9 B Series Quick setup guide

Philips

Philips 32HF9385D Käyttöopas

Sharp

Sharp LC-40FI5012E user manual

Loewe

Loewe Table Stand Reference 55 user guide

Philips

Philips 32PFH5300 Service manual