Sanyo VPC-S885 User manual

INSTRUCTION MANUAL

Digital Camera

Please read these instructions carefully before using the camera.

Keep this manual in a safe place for later reference.

EN-1

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

Note:

This equipment has been tested and found to comply with the limits for Class B digital

devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.This

equipment generates uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of

the FCC rules.

Do not make any changes or modifications to the equipment unless otherwise specified

in the manual. If such changes or modifications should be made, you could be required

to stop operation of the equipment.

Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail),

restart the application or disconnect and connect the communication cable (USB, etc.)

again.

EN-2

READ THIS FIRST

Trademark Information



Microsoft

and Windows

are U.S. registered trademarks of Microsoft Corporation.

Pentium®is a registered trademark of Intel Corporation.

Macintosh is a trademark of Apple Inc.

SD™ is a trademark.

SDHC™ is a trademark.

Other names and products may be trademarks or registered trademarks of their

respective owners.

Product Information

Product design and specifications are subject to change without notice. This

includes primary product specifications, software, software drivers, and user’s

manual. This User Manual is a general reference guide for the product.

The product and accessories that come with your Camera may be different from

those described in this manual. This is due to the fact that different retailers often

specify slightly different product inclusions and accessories to suit their market

requirements, customer demographics, and geographical preferences. Products

very often vary between retailers especially with accessories such as batteries,

chargers, AC adapters, memory cards, cables, pouches, and language support.

Occasionally a retailer will specify a unique product color, appearance, and internal

memory capacity. Contact your dealer for precise product definition and included

accessories.

The illustrations in this manual are for the purpose of explanation and may differ

from the actual design of your Camera.

The manufacturer assumes no liability for any errors or discrepancies in this user

manual.

EN-3

SAFETY INSTRUCTIONS

Read and understand all Warnings and Cautions before using this product.

Warnings

If foreign objects or water have entered the Camera, turn the power off

and remove the batteries.

Continued use might cause fire or electric shock. Consult the store of

purchase.

If the Camera has fallen or its case has been damaged, turn the power

off and remove the batteries.

Continued use might cause fire or electric shock. Consult the store of

purchase.

Do not disassemble, change or repair the Camera.

This might cause fire or electric shock. For repair or internal inspection, ask

the store of purchase.

Do not use the Camera in areas near water.

This might cause fire or electric shock. Take special care during rain, snow,

on the beach, or near the shore.

Do not place the Camera on inclined or unstable surfaces.

This might cause the Camera to fall or tilt over, causing damage.

Keep the batteries out of the reach of children.

Swallowing the batteries might cause poisoning. If the batteries are

accidentally swallowed, immediately consult a physician.

Do not use the Camera while you are walking, driving or riding a

motorcycle.

This might cause you to fall over or result in traffic accident.

Please use batteries with complete external seals.

Do not use batteries from which the seals have been damaged or removed.

This may cause leakage, explosion, or injury.

EN-4

Cautions

Insert the battery paying careful attention to the polarity (+ or –) of the

terminals.

Inserting the battery with its polarities inverted might cause fire and injury, or

damage to the surrounding areas due to the battery rupturing or leaking.

Do not fire the flash close to anyone’s eyes.

This might cause damage to the person’s eyesight.

Do not subject the LCD monitor to impact.

This might damage the glass on the screen or cause the internal fluid to

leak. If the internal fluid enters your eyes or comes into contact with your

body or clothes, rinse with fresh water. If the internal fluid has entered your

eyes, consult a physician to receive treatment.

Camera is a precision instrument. Do not drop it, strike it or use

excessive force when handling the Camera.

This might cause damage to the Camera.

Do not use the Camera in humid, steamy, smoky, or dusty places.

This might cause fire or electric shock.

Do not remove the battery immediately after long period of continuous

use.

The battery becomes hot during use. Touching a hot battery might cause

burns.

Do not wrap the Camera or place it in cloth or blankets.

This might cause heat to build up and deform the case, resulting in fire. Use

the Camera in a well-ventilated place.

Do not leave the Camera in places where the temperature may rise

significantly, such as inside a car.

This might adversely affect the case or the parts inside, resulting in fire.

Before you move the Camera, disconnect cords and cables.

Failure to do this might damage cords and cables, resulting in fire and

electric shock.

EN-5

Warning:

TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE

FOR AMERICAN USERS

The following advisory is included in accordance with the laws of the State of California

(USA):

WARNING:

This product contains chemicals, including lead, known to the States of California to

cause cancer, birth defects or other reproductive harm. Wash hands after handling.

 This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designated to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

* Reorient or relocate the receiving antenna.

* Increase the separation between the equipment and receiver.

* Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

* Consult the dealer or an experienced radio/TV technician for help.

 Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

EN-6

FOR CANADIAN USERS

 This Class B digital apparatus complies with Canadian ICES-003

FOR EU USERS

The symbol mark and recycling systems described below apply to

EU countries and do not apply to countries in other areas of the

world.

Your SANYO product is designed and manufactured with high

quality materials and components which can be recycled and/or

reused.

The symbol mark means that electrical and electronic equipment,

batteries and accumulators, at their end-of-life, should be disposed

of separately from your household waste.

Note:

If a chemical symbol is printed beneath the symbol mark, this

chemical symbol means that the battery or accumulator contains a

heavy metal at a certain concentration.

This will be indicated as follows: Hg: mercury, Cd: cadmium, Pb:

lead

In the European Union there are separate collection systems for

used electrical and electronic equipment, batteries and

accumulators.

Please, dispose of them correctly at your local community waste

collection/recycling centre.

Please, help us to conserve the environment we live in!

Manufacturer and Address

SANYO Electric Co., Ltd.

5-5, Keihan-hondori, 2-chome,

Moriguchi City, Osaka, Japan

Authorized Representative and Address

SANYO FISHER Sales (Europe) GmbH

Stahlgruberring 4, D-81829 Munich, Germany

EN-7

Symbols used in this manual

 Points giving some extended instructions or special points to pay attention to.

You many find the answers to questions or problems concerning camera operation in

the sections “Troubleshooting”.

This class B digital apparatus complies with Canadian ICES-003.

FCC information

Tested To Co m p l y

With FCC Standards

FOR HOME OR OFFICE USE

Model number: VPC-S885

Trade Name: SANYO

Responsible party: SANYO FISHER COMPANY

Address: 21605 Plummer Street

Chatsworth, California 91311

Telephone No.: (818) 998-7322

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Declaration of Conformity

Canadian ICES-003 information

EN-8

Notes on Battery Usage

When you use the batteries, carefully read and strictly observe the Safety Instructions

and the notes described below:

Use only the specified batteries.

Avoid extremely cold environments as low temperatures can shorten the battery life

and reduce Camera performance. Therefore Ni-MH rechargeable batteries are

highly recommended.

When you are using a new rechargeable batteries or rechargeable batteries that

have not been used for an extended period of time (the batteries that passed the

expiry date are exception), it may affect the number of images that can be captured.

Therefore, to maximize their performance and lifetime, we recommend that you fully

charge the batteries and discharge them for at least one complete cycle before use.

The batteries may feel warm after a long period of continuous use of the Camera or

the flash. This is normal and not a malfunction.

The Camera may feel warm after a long period of continuous use. This is normal

and not a malfunction.

If the batteries are not to be used for a long period of time, remove them from the

Camera to prevent leakage or corrosion and store them after no battery power is left.

Stored for a long time in a fully charged condition, their performance may be

impaired.

Always keep the battery terminals clean.

There is a risk of explosion if the batteries are replaced by an incorrect type.

Dispose of used batteries according to the recycle instructions.

Charge the rechargeable batteries fully before using for the first time.

Never use batteries of different types (together) or mix old and new batteries.

Never use manganese batteries.

To prevent short-circuiting or fire, keep the batteries away from other metal objects

when carrying or storing.

CONTENTS

EN-9

10 INTRODUCTION

10 Overview

10 Package Contents

11 GETTING TO KNOW YOUR

CAMERA

11 Front View

12 Rear View

13 LCD Monitor Display

15 GETTING STARTED

15 Preparation

16 Initial Settings

18 CAPTURE MODE

18 Capturing Images

19 Setting the Scene Mode

21 Setting the Panorama Mode

22 Taking Images When the Smile

Feature Is On

23 Recording Shots into Multiple Image

Layout

23 Recording Shots using Face

Detection Technology

24 VIDEO MODE

24 Recording Video Clips

24 Playing Back Video Clips

25 PLAYBACK MODE

25 Playing Back Still Images

26 Thumbnail Display

26 Removing Red-eye

27 Attaching Voice Memos

28 Protecting Images

29 Erasing Images

30 MENU OPTIONS

30 Capture Menu

33 Video Menu

34 Playback Menu

35 Setup Menu

37 TRANSFERRING FILES TO

YOUR COMPUTER

37 Downloading Your Files

38 EDITING SOFTWARE

INSTALLATION

39 SPECIFICATIONS

40 APPENDIX

40 Possible Number of Shots

41 Troubleshooting

42 Connecting to a PictBridge Compliant

Printer

Table of contents

Other Sanyo Digital Camera manuals

Popular Digital Camera manuals by other brands

Mercury

Mercury 350K user manual

Pentax

Pentax Optio LS 465 operating manual

GE SMART A1255 user manual

Point Grey

Point Grey Gazelle Getting started

Nikon

Nikon COOLPIX A Reference manual

Pentax

Pentax P-5 manual

BlazeVideo

BlazeVideo A280 instruction manual

Sony

Sony MCA-20 manual

Sony

Sony Alpha DSLR-A290 instruction manual

ATIK Cameras

ATIK Cameras One user manual

CohuHD Costar

CohuHD Costar 3930 Series Installation and operation manual

Leica

Leica M10-R quick start guide

FujiFilm

FujiFilm FinePix A700 owner's manual

Lorex

Lorex LNZ81P25 Series quick start guide

GE J1470S user manual

Sony

Sony A6700 Startup guide

Canon

Canon EOS ELAN7 instructions

Nikon

Nikon Coolpix 100 user manual