Sanyo CLT-2425 User manual
CLT-2425
INSTRUCTION MANUAL
2.4-GHz
Digital Spread Spectrum
Cordless Telephone
with Call Manager Features
IMPORTANT
Charge the handset battery pack for a full 15 hours before using your
cordless handset for the first time.
www.sanyocanada.com
CLT2425 ENG-6/13 6/13/01 13:57 Page i
Congratulations on your purchase of the CLT-2425 cordless telephone.
This phone is designed for reliability, long life, and outstanding performance utilizing the
latest in 2.4 G z Digital Spread Spectrum technology.
Note: Some illustrations in this manual may differ from the actual unit for
explanation purposes.
●2.4 G z Digital Spread Spectrum Technology
●Call Manager Features*: Caller ID, Caller ID on Call Waiting and Call Waiting with Options
*Each feature works with your network service. A subscription required.
●50-Number Caller ID List
●Programmable Network Service Key
●Voice Mail Waiting Indicator on the Base and andset
●One-Touch Voice Mail Access
●3-Line, 16-Character Backlit andset Display
●Lighted andset Keypad and TALK/END Key
●20-Name/Number Directory
●Last 3-Number Redial
●andsFree Speakerphone in the andset
●10-Day Standby Battery Life/6- our Talk Time
●30-Channel Auto/Manual Scan
●Call Time Display
●Out of Range Warning
●Pulse/Tone Dialing
●Page/ andset Locator
●andset Earpiece and Speaker Volume Controls
●Ringer Volume Control with Off setting
●Belt Clip and eadset Jack
●Wall-Mountable
●earing Aid Compatible
2.4-GHz Digital Spread Spectrum echnology utilizes a “wider frequency band”
vs. a “single narrow band” used in standard digital transmissions. The result is the
clarity of digital sound, extended range and a secure conversation with virtually no
interference from other 2.4 G z cordless phones or radio transmission devices.
The clearest channel is automatically selected for each transmission. The phone
selects one of over 65,000 digital security codes for the handset and base.
These features enhance your phone’s security and also prevent unauthorized calls
as a result of your phone being activated by other equipment.
Introduction
Features
CLT2425 ENG-6/13 6/13/01 14:00 Page ii
1. andset antenna
2. eadset jack cover
3. andsFree speaker
4. Battery compartment
5. Earpiece speaker
6. LCD display
7. MEMORY key
8. TALK/END key
9. CALL REVIEW/VOLUME (down) key
10. Voice Mail key
11.
L
eft cursor key (TONE/✱/)
12. SERVICE MENU key
13. REDIAL/PAUSE key
14. Microphone
15. CALL REVIEW/VOLUME (up) key
16. SELECT key
17. CID/FLAS key
18. Right cursor key ( )
19. SPEAKER key
20. DELETE/SCAN key
21. andset charging contacts
Controls and functions
1
2
3
4
5
6
7
8
9
11
10
14
12
13
16
17
20
19
18
15
CLT2425 ENG-6/13 6/13/01 13:57 Page iii
23
22
24
28
25
26
27
29 30 31
22. Bottom bracket
23. andset retainer
24. Base charging contacts
25. PAGE/FIND key
26. C ARGE/IN USE indicator
27. VOICE MAIL indicator
28. Base antenna
29. Pulse-Tone switch
30. DC power input
31. Phone jack
CLT2425 ENG-6/13 6/13/01 13:57 Page iv
E1
Introduction/Features ..............................................inside front cover
Controls and Functions............................................inside front cover
Getting started
Read this first..........................................................................................E2
Step 1: Checking the package contents .........................................E3
Step 2: Setting up the base unit ........................................................E4
Desktop use ..............................................................................E5
Mounting the base unit on a wall .......................................E7
Step 3: Preparing the battery pack ...................................................E9
Basics
Making a call ........................................................................................E11
andsFree speakerphone ................................................................E12
Receiving a call....................................................................................E13
Call Waiting ..........................................................................................E13
Lighted keypad ....................................................................................E14
Scanning ...............................................................................................E14
Adjusting the ringer and earpiece volume...................................E14
Redialing a call.....................................................................................E15
Directory
Storing phone numbers and names ..............................................E17
Making calls from the directory ......................................................E19
Editing a stored name and/or phone number ............................E21
Erasing a stored name and phone number .................................E23
Caller ID features
Caller ID .................................................................................................E24
When the telephone rings................................................................E26
Viewing the Caller ID list...................................................................E27
Deleting information from the Caller ID list .................................E28
Using the Caller ID list .......................................................................E30
Using Caller ID on Call Waiting service.........................................E32
Advanced calling features
List of features .....................................................................................E33
Voice mail access ...............................................................................E34
Paging ...................................................................................................E35
Accessing calling features ...............................................................E36
Pre-programmed calling features...................................................E37
Adding new features .........................................................................E38
Call Waiting with Options.................................................................E40
Additional Information
Changing the digital security code.................................................E41
Out of Range ........................................................................................E41
Installing the beltclip..........................................................................E42
eadset installation ...........................................................................E42
Note on power source.......................................................................E43
Maintenance ........................................................................................E43
Troubleshooting......................................................................................E44
Technical Information...........................................................................E45
Warranty ...................................................................................................E46
Sanyo On Site (SOS) Information ....................................................E47
Getting Started
Basics
Directory
Caller ID
Features
Advanced Calling
Features
CONTENTS
Additional
Infor ation
CLT2425 ENG-6/13 6/13/01 13:57 Page 1
E2
This cordless telephone must be set up before use. Follow these steps:
Step 1 (page E3)
Unpack and check the telephone and accessories.
Step 2 (pages E4 to E8)
Choose the best location to set
up the base unit.
Base unit
Step 3 (pages E9 to E10)
Insert the battery pack into the handset. You
must charge the battery pack for a full 15 hours
before using the phone.
Handset
About the digital security code
This cordless telephone uses a digital security code to prevent unauthorized access to
your base unit. This security code prevents other cordless handsets from making calls
through your base unit.
A random security code will be assigned automatically between your base unit and
handset when you charge the battery pack for the first time.
If you want to reset the security code, see page E41.
GETTING STARTED
Read this first
CLT2425 ENG-6/13 6/13/01 13:57 Page 2
E3
Make sure you have received the following items in the package.
• Base unit • Handset • AC adaptor
(AD 210)
• Rechargeable
battery pack
(SANYO 3KR 600AAL)
• Telephone line
cord (1)
• Bottom bracket
for desktop use
and wall mounting
• This Owner's Manual
• Belt clip
Checking the package contents
GETTING STARTED
CLT2425 ENG-6/13 6/13/01 13:57 Page 3
E4
Avoid places near electrical equipment such as refrigerators, computers, TVs,
microwaves or fluorescent lamps. These may cause interference or reduce the operating
range of the cordless telephone.
Do the following steps:
• Choose the best location
• Connect the base unit
• Choose the dialing mode
• The location should be close to both a phone jack and a continuous power outlet which is
not switchable.
• Be sure there is sufficient space to raise the base antenna fully to a vertical position.
• The base can be placed on a desk, tabletop or mounted on a standard wall plate.
Notes:
Setting up the base unit
GETTING STARTED
CLT2425 ENG-6/13 6/13/01 13:57 Page 4
When connecting the power cord, make sure it does not create a trip or
fire/electrical hazard. Avoid places where it could become chafed.
E5
Connect the base unit
If you want to install the base unit
on the wall, see page E7.
To AC outlet
To telephone outlet
To TEL LINE
To DC IN 9V
AC adaptor
(supplied)
Telephone line cord
(supplied)
3
2
1
Snap the bottom bracket into the notches on the base.
2
Connect the AC adaptor to the
DC IN 9V
jack and to a standard 120-V AC wall outlet.
Then raise the antenna to a vertical position.
3
Connect the telephone line cord to the
TEL LINE
jack and to a telephone outlet.
Note:
Desktop use
GETTING STARTED
To assure proper handset charging, the bottom bracket must be attached.
Note:
CLT2425 ENG-6/13 6/13/01 13:57 Page 5
E6
Choose the dialing mode
Depending on your dialing system, set the PULSE-TONE switch as follows:
If your dialing system is Set the switch to
Tone TONE
Pulse PULSE
If you are not sure of your dialing system
Make a trial call with the PULSE-TONE switch set to TONE.
If the call connects, leave the switch as is; otherwise, set to PULSE.
PULSE TONE
•Use only the supplied AD-210 AC adaptor. Do not use any other AC adaptor.
•Connect the AC adaptor to a continuous power supply.
•Place the base unit close to the AC outlet so that you can unplug the AC adaptor easily.
•If your telephone outlet is not modular, contact your telephone company for assistance.
Notes:
GETTING STARTED
CLT2425 ENG-6/13 6/13/01 13:57 Page 6
Other manuals for CLT-2425
1
Table of contents
Other Sanyo Cordless Telephone manuals
Sanyo
Sanyo CLT-2430 User manual
Sanyo
Sanyo CLT-D6220 User manual
Sanyo
Sanyo CLT-2419 User manual
Sanyo
Sanyo CLT-2410 User manual
Sanyo
Sanyo CLT-99 User manual
Sanyo
Sanyo CLT-3602 User manual
Sanyo
Sanyo CAS-D6320 User manual
Sanyo
Sanyo CLT-2419 User manual
Sanyo
Sanyo CLT-9960 User manual
Sanyo
Sanyo CLT-9902 User manual
Sanyo
Sanyo CLT-538 User manual
Sanyo
Sanyo CLT-9665 User manual
Sanyo
Sanyo CLT-186X User manual
Sanyo
Sanyo CLT-538X User manual
Sanyo
Sanyo CLT-9901 User manual
Sanyo
Sanyo CLT-670 User manual
Sanyo
Sanyo CLT-E30 User manual
Sanyo
Sanyo CLT-2418 User manual
Sanyo
Sanyo CLT-9660 User manual
Sanyo
Sanyo CLT-2410 User manual
