Sanyo CDP-MT500 User manual

INSTRUCTION MANUAL CDP-MT500

Compact Disc Player with

MP3 Decoder

CDP-MT500/AU 6/24/04, 5:38 PM1

CLASS 1 LASER PRODUCT

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

PRECAUTIONS

CAUTION

USE OF CONTROLS ORADJUSTMENT OR PERFORMANCE OF PRO-

CEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT

IN HAZARDOUS RADIATION EXPOSURE.

THIS PRODUCT SHOULD NOTBEADJUSTED OR REPAIRED BYANY-

ONE EXCEPT QUALIFIED SERVICE PERSONNEL.

CAUTION – INVISIBLE LASER RADIATION WHEN OPEN AND

INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.

ADVARSEL – USYNLIG LASER STRÅLING VED ÅBNING, NÅR

SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION, UNDGÅ UDS ÆTTELSE

FOR STRÅLING.

VARNING – OSYNLIG LASER STRÅLNING NÄR DENNA DEL ÄR ÖPPNAD

OCH SPÄRR ÄR URKOPPLAD. STRÅLEN ÄR FARLIG.

VORSICHT – UNSICHTBARE LASERSTRAHLUNG TRITTAUS, WENN

DECKEL GEÖFFNET UND WENN SICHERHEITSVERRIEGELUNG

ÜBERBRÜCKT IST. NICHT, DEM STRAHL AUSSETZEN.

VARO – AVATTAESSA JASUOJALUKITUS OHITETTAESSA OLET ALTTIINA

NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.

CDP-MT500/AU 6/24/04, 5:38 PM2

• Do not use where there are extremes

of temperature (below 5°C or exceed-

ing 35°C).

• Sudden changes in the ambient tem-

perature may cause condensation to

form on the optical lens inside the unit.

If this happens, take out the disc, leave

the unit for about 1 hour, and then

proceed to operate.

• Do not insert pins, etc., inside the unit.

This unit is equipped with a safety

device which automatically turns the

laser beam off when the disc compart-

ment is opened. If a pin or other metal

object should get inside the unit, how-

ever, this safety device may be

deactivated.

• High volume levels can create poten-

tially dangerous situations by drown-

ing out surrounding sounds. Use cau-

tion when driving while operating the

unit, and obey all applicable laws.

Do not play your headset at a high

volume level. Hearing experts advise

against continuous extended play.

If you experience a ringing in your

ears, reduce the volume or discon-

tinue use.

• Do not use while bicycling, running or

operating a motorized vehicle.

• The rating label is located on the bot-

tom of the unit.

• The apparatus shall not be exposed to

dripping or splashing.

CDP-MT500/AU 6/24/04, 5:38 PM3

CONTROLS

1. Disc compartment

2. Function switch (FUNCTION)

3. Open switch (OPEN)

4. Hold switch (HOLD)

5. Bass expander switch (DBBS)

6. Volume control (VOLUME)

7. Headphones socket (PHONES)

8. Line output socket (LINE OUT)

9. Mode/bbutton (MODE/ b)

10. Resume/abutton (RESUME/ a)

11. Enter/Clear button (ENTER/CLEAR)

12. Programme/Memory button

(PROG/MEMORY)

13. Preset tuning down/ pbutton

(PRESET DOWN/ p)

14. Display

15. Anti roiling shock/Band select/Menu

button (ASR/BAND/MENU)

16. Preset tuning up/ obutton

(PRESET UP/ o)

17. Search/Skip/Tuning down button

(SKIP/TUN -/ f)

18. External DC socket (DC IN 4.5V)

19. Search/Skip/Tuning up button

(SKIP/TUN +/ e)

20. Power off function/Stop button

(POWER OFF/ n)

21. Power on function/Play/Pause button

(POWER ON/ i )

22. Battery compartment lid (back panel)

456

14 18 20

1513 17 19

CDP-MT500/AU 6/24/04, 5:38 PM4

The buttons on the remote control function in the same way as the corresponding buttons

on the unit.

1. Search/Skip/Tuning down button ( f)

2. Search/Skip/Tuning up button ( e)

3. Volume control (VOLUME)

4. Play/Pause button (PLAY/PAUSE ak)

5. Stop button (STOP n)

12 4 5

CDP-MT500/AU 6/24/04, 5:38 PM5

POWER SUPPLY

AC adaptor

Plug one end of the AC adaptor into the DC IN 4.5V socket, then plug the other end into an

AC outlet.

• Use only the supplied AC adaptor

• If the AC adaptor is connected. The power supply automatically switches to the AC

power source and the installed batteries are disconnected.

Alkaline batteries

Install two “ AA” batteries (not supplied) as shown below. Observe proper polarity.

Battery replacement

If the rechargeable battery or alkaline batteries are weak and discharged, “Low Battery”

appears on the display, then the power automatically turns off. If this occurs, replace the

alkaline batteries.

• Dispose of all used batteries safety and in accordance with all applicable laws.

Note:

When you are not going to use the unit for one month or more, take the batteries out of the

battery compartment.

CDP-MT500/AU 6/24/04, 5:38 PM6

REMOTE CONTROL AND HANDPHONES

CONNECTIONS

• Be sure to reduce the volume before connecting or disconnecting the headphones.

Connect the remote control/headphones or headphones to the PHONES socket.

CDP-MT500/AU 6/24/04, 5:38 PM7

This unit can play back the CD-R/RW that has recorded music data or MP3 files.

Before playing back Music CD or MP3 CD, please read the following.

• MP3 CD is the disc that standardized by ISO9660, its file name must include 3-digits

extension letters, “mp3”.

• The directory and file names of the MP3 CD must be corresponded to the ISO stan-

dardized files.

• Single-session disc can be played back.

• Some multi-session discs and mixed discs cannot be played back depending on the

recording condition.

• This unit can recognize up to 99 folders or 300 files per disc.

The CD with 99 folders or 300 files and over is not available to this unit.

And if CD has a long file name, this unit can’t recognize up to 300 files.

• This unit can recognize up to 8 directory trees per disc.

• MP3 CD may not be played in the recorded order.

• Music section in “CD Extra” can be played back, not Data section.

• Music files recorded by “Packet Writing” cannot be played back.

Notes on disc writing method

When you make MP3 CD by using your PC, set 44.1 kHz of sampling frequency.

There are three basic methods for writing to a CD: “Track-at-Once”, “Disc-at-Once”, and

“Packet Writing”.

Music files recorded by “Track-at-Once” or “Disc-at-Once” can be played back on this unit.

(Note: The unit cannot play back the music files added with “Track-at-Once”.)

Music files recorded by “Packet Writing” cannot be played back.

INFORMATION

CDP-MT500/AU 6/24/04, 5:38 PM8

MP3 CD directory sample:

Playback order: song01 xsong02 x… song14

Folder number 01

MP3 CD There is no MP3 file. The unit skips it.

song01.mp3

song02.mp3

song03.mp3

song04.mp3

song05.mp3

douc01.doc

photo01.jpg

song06.mp3

song07.mp3

song08.mp3

song09.mp3

song10.mp3

song11.mp3

song12.mp3

02 album02 03 album04

song13.mp3

song14.mp3

04 album03

CAUTION:

• Some MP3 CDs can not be played back depending on the recording conditions.

• The CD-R/RW that has no music data or non-MP3 files can not be played back.

• Do not make an empty folder. It may not work correctly.

01 album01

CDP-MT500/AU 6/24/04, 5:38 PM9

BEFORE OPERATION

Note:

• Press the MENU/ASR button to turn the anti rolling shock function off. “AS” disappears.

Press the button again to turn it on.

• Sound may skip or mute for a few seconds when you press the ASR button during

play.

• Playing may stop when the unit gets strong shock even when the anti rolling shock

function is on.

• When playing back MP3 CD, this function always works even if “AS” doesn’t appear.

(The function is not cancelled by pressing the ASR button.)

Anti rolling shock function

In the previous anti-shock function, when skips occurred while available memory runs out,

then the sound would suffer some interruption.

The new anti rolling shock function is designed to prevent skipping to the greatest extent

possible instead of supplementing the skipped portion of the sound.

This is achieved by expanding the memory capacity, and in addition full attention has been

given also to increasing the unit's signal reading capability.

Moreover, consideration has been given to eliminating the basic causes of skipping, both

from the standpoint of horizontal shock and vertical shock.

Use this function when listening during walk or playing in a car.

When the POWER ON/ ibutton is pressed first time, the anti rolling shock function turns

on automatically. “AS” blinks on the display. Then “AS” stop blinks when the buffer memory

is full of next 45 seconds music data.

CDP-MT500/AU 6/24/04, 5:38 PM10

Other manuals for CDP-MT500

Table of contents

Popular CD Player manuals by other brands

RCA

RCA RP-7923 instruction manual

Pioneer

Pioneer DEH-P3550MP XM Operation manual

Philips

Philips AZ1207 owner's manual

Philips

Philips CD582 user manual

Philips

Philips AZ 6821 operating manual

Lasonic

Lasonic MSU-2020 user manual

THOMSON

THOMSON RCD150 user manual

Denon

Denon DCD-1420 Service manual

Panasonic

Panasonic SJ-MR100 operating instructions

Onkyo

Onkyo DX-7210 instruction manual

Sony

Sony MZ-R3 operating instructions

Denon

Denon DVM-4800 Service manual

JBL

JBL MR-32 Operation manual

RCA

RCA RCD152 Specifications

Technics

Technics SL-PS770A Service manual

Clarion

Clarion compact disc owner's manual

Sony

Sony MZ-M10 operating instructions

Philips

Philips Expanium AZ 1538 user manual