Sanyo VPC-HD1000EX User manual

VPC-HD1000EX

VPC-HD1000

VPC-HD1000GX

INSTRUCTION MANUAL

Digital Movie Camera

Please read these instructions carefully before using the camera.

Make sure to read and understand the separate booklet “SAFETY MANUAL”.

Keep this manual in a safe place for later reference.

Important note

This manual explains how to safely operate the VPC-HD1000EX,

VPC-HD1000 and VPC-HD1000GX.

Any information regarding only one of these products will be labeled as such.

Downloaded From VideoCamera-Manual.com Manuals

iEnglish

Warning

TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

FOR AMERICAN USERS

The following advisory is included in accordance with the laws of the State of

California (USA):

WARNING:

This product contains chemicals, including lead, known to the State of

California to cause cancer, birth defects or other reproductive harm. Wash

hands after handling.

iThis equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

hReorient or relocate the receiving antenna.

hIncrease the separation between the equipment and receiver.

hConnect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

hConsult the dealer or an experienced radio/TV technician for help.

iChanges or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

Declaration of Conformity

Model number: VPC-HD1000

Trade Name: SANYO

Responsible party: SANYO FISHER COMPANY

Address: 21605 Plummer Street, Chatsworth, California 91311

Telephone No.: (818) 998-7322

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interfer-

ence that may cause undesired operation.

Downloaded From VideoCamera-Manual.com Manuals

English ii

FOR CANADIAN USERS

iThis Class B digital apparatus complies with Canadian ICES-003.

FOR EU USERS

Note:

iThis symbol mark and recycle system apply only to EU

countries and do not apply to countries in other areas of

the world.

Your SANYO product is designed and manufactured with

high quality materials and components which can be

recycled and reused.

This symbol means that electrical and electronic

equipment, at their end-of-life, should be disposed of

separately from your household waste.

Please dispose of this equipment at your local community

waste collection/recycling centre.

In the European Union there are separate collection

systems for used electrical and electronic products.

Please help us to conserve the environment we live in!

FOR RUSSIAN USERS

This product certified by official certification company

which is authorized by Russian Federation.

SANYO FISHER Sales (Europe) GmbH

Stahlgruberring 4, D-81829 München, Germany

SANYO Electric Co., Ltd.

1-1, Sanyo-cho, Daito City, Osaka 574-8534, Japan

Downloaded From VideoCamera-Manual.com Manuals

iii English

Symbols used in this manual

HINT Points giving some extended instructions or special points to pay

attention to.

CAUTION Points that require special attention.

(page xx) Refer to the page indicated for detailed information.

You may find the answers to questions or problems concerning camera

operation in the sections “COMMONLY ASKED QUESTIONS” (page 189)

and “TROUBLESHOOTING” (page 197).

Downloaded From VideoCamera-Manual.com Manuals

English iv

SHOOT, PLAY BACK AND SAVE

Preparing the camera

1 Insert the SD Memory Card.

hAn SD Memory Card is not included with your camera. Please

purchase a commercially sold card.

hIn this manual, the SD Memory Card is referred to as the “card”.

2 Connect the AC adaptor to the camera.

Card slot cover Card slot

SD Memory Card

Power cord

DC IN terminal

Supplied AC adaptor

To power outlet

DC IN terminal cover

Downloaded From VideoCamera-Manual.com Manuals

vEnglish

SHOOT, PLAY BACK AND SAVE

Before capturing those important shots, be sure to first take a

test shot to confirm that your camera is set up and ready to go

Sanyo declines any claim for compensation for recorded contents etc. in case

of photographing or recording failure due to a chance camera or card flaw.

Shooting

1 Set the REC/PLAY switch

to REC.

2 Press the ON/OFF button

for at least 1 second to turn

the camera on.

If the screen to set the date

and time appears, press

the MENU button 2 times

to cancel it.

For how to set the date

and time, see page 43.

3 Record.

To record a video clip:

Press the [ ] button to

begin recording a video

clip.

Press the [ ] button

again to end the recording.

To take a photo:

Press the [ ] button.

A still image is captured.

362 00:05:08

F1.8

1/14

362 00:05:08

F1.8

1/14

ON/OFF button

[]button

Monitor

REC/PLAY switch

Set to REC

Downloaded From VideoCamera-Manual.com Manuals

English vi

Playback

When you are finished using the camera...

Press the ON/OFF button for at least 1 second to turn the camera off.

Set the REC/PLAY switch

to PLAY.

The display changes to

the Playback Screen and

the image that was just

captured is shown.

Toggle the SET button to

the left or right to display

the image you wish to see.

Video clips are indicated

by a video clip pattern

along the left and right

sides of the screen.

Press the SET button to

start video clip playback.

<To return to the shooting

mode>

Set the REC/PLAY switch

to REC.

PLAY

2007.12.24

SET button

<Example: After recording a

video clip>

REC/PLAY switch

Set to PLAY

Video clip pattern

Downloaded From VideoCamera-Manual.com Manuals

vii English

SHOOT, PLAY BACK AND SAVE

Burn your recorded video clips onto a DVD

(Windows XP)

Using the supplied DVD-ROM (Xacti Software DVD), you can store your

captured images on a DVD. Detailed information about the Xacti

Software DVD can be found on page 4 in the Xacti Software DVD

INSTRUCTION MANUAL.

Install application programs

1 Set the supplied DVD-ROM (Xacti Software DVD) in your computer’s

DVD drive.

hThe installation window opens.

2 Click on [Ulead DVD MovieFactory 5 SE] (hereinafter referred to as

“MovieFactory”).

hInstall the application program with which you can create DVDs

(MovieFactory).

1Click on “Get activation code from Internet”

2Enter your registration information

Email address: Your current email address

Password: Create a password

Serial number: Enter the serial number from the DVD-ROM

(supplied) sheet.

hEnter your email address, password, and the serial number,

and click on the “Sign In” button.

hClick on the “Create a New Account” button, enter your

registration information, and click on the “Submit” button.

3The activation code will appear in a pop-up window. Enter this

number in the [Product Activation] window, and click on the

“Activate” button.

hAfter clicking on an application program, follow the instructions shown

on the monitor to install the program.

Downloaded From VideoCamera-Manual.com Manuals

English viii

3 In the installation window, click on [Finish] and remove the DVD-

ROM from the computer’s DVD drive.

hWhen the installation window closes, a dialog box to connect to the

website introducing Kodak’s online service appears. Check the [No

thanks!] option button, and then click on the [OK] button.

Connect your camera to a computer

Connect your camera to a computer, and copy the desired files to the

computer.

1 Use the supplied dedicated USB interface cable to connect your

camera to the computer.

2 Turn on the camera.

hThe USB Connection Screen appears on the camera’s monitor.

OKCANCEL

USB CONNECTION

CANCEL

PRINTER

COMPUTER

Dedicated USB

interface cable

To USB connector

on the computer

Supplied dedicated USB

interface cable

iInsert the plug with the [n]

mark facing up.

To power outlet

To USB terminal on

the docking station

Downloaded From VideoCamera-Manual.com Manuals

ix English

SHOOT, PLAY BACK AND SAVE

3 Select [COMPUTER], and press the SET button.

hThe screen to select the computer connection mode appears.

4 Select [CARD READER], and press the SET button.

hThe message [Found New Hardware] appears in the task tray,

showing that the camera is recognized as a drive.

hThe card is recognized (mounted) as a disk, and the [XACTI (E:)] icon

appears in the [My Computer] window.

* The drive name (E:) may be different on your computer.

5 Copy the files from the card to the computer’s hard disk.

hThe data recorded with your camera are stored in the following folder.

You can specify the folder on the hard disk to which to copy the files.

XACTI (E:)\DCIM\****SANYO

(**** represents numbers [page 12 in the Xacti Software DVD

INSTRUCTION MANUAL]).

Downloaded From VideoCamera-Manual.com Manuals

This manual suits for next models

Table of contents

Other Sanyo Camcorder manuals

Sanyo

Sanyo VPC-CG20 - Full HD 1080 Video User manual

Sanyo

Sanyo Xacti VPC-CG10BK User manual

Sanyo

Sanyo VPC-HD1010BK User manual

Sanyo

Sanyo Xacti HD VPC-HD2000EX User manual

Sanyo

Sanyo XACTI VPC-SH1GX Assembly instructions

Sanyo

Sanyo Xacti VPC-HD2000 Series User manual

Sanyo

Sanyo VPC-HD100 - High-Definition Camcorder User manual

Sanyo

Sanyo VM-EX370P User manual

Sanyo

Sanyo Xacti VPC-CG6 User manual

Sanyo

Sanyo VPC-E9 User manual

Sanyo

Sanyo VPC-CG20 - Full HD 1080 Video User manual

Sanyo

Sanyo VM-EX220P Guide

Sanyo

Sanyo Xacti VPC-HD1010GX User manual

Sanyo

Sanyo VPC-E1W User manual

Sanyo

Sanyo VM-RZ1P User manual

Sanyo

Sanyo Xacti VPC-CG10BK User manual

Sanyo

Sanyo Xacti VPC-C1 User manual

Sanyo

Sanyo VPC-WH1W User manual

Sanyo

Sanyo Xacti VPC-CG10BK User guide

Sanyo

Sanyo VPC-TH1BL User manual

Sanyo

Sanyo Xacti VPC-HD2000 Series User manual

Sanyo

Sanyo Xacti VPC-E2 User manual

Sanyo

Sanyo VPC-GH2 - Full HD 1080 Video Assembly instructions

Sanyo

Sanyo VPC-HD1A User manual

Popular Camcorder manuals by other brands

Toshiba

Toshiba CAMILEO Z100 user guide

Panasonic

Panasonic NV-VS40B operating instructions

Canon

Canon RC 260 instructions

Sony

Sony Handycam DCR-DVD7E operating guide

Brinno

Brinno TimeLapse TLC200 user manual

JVC

JVC GR-SXM68AC Schematic diagram

Panasonic

Panasonic AG-HMC152EN operating instructions

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p user guide

MYDLINK

MYDLINK DCS-6100LH Quick installation guide

Sony

Sony video Hi8 Handycam CCD-TR555 operating instructions

SECURECOM

SECURECOM V-5014B installation guide

Panasonic

Panasonic HDC-SD100 operating instructions

Sharper Image

Sharper Image U-VIDEO instruction manual

JVC

JVC AA-V15EG instruction manual

Canon

Canon LEGRIA HV40 instruction manual

Sony

Sony Handycam DCR-VX2000 Service manual

RCA

RCA CC616 user guide

Panasonic

Panasonic NVM40 Service manual