Sanus VLF525 User manual

VLF

525

INSTRUCTION MANUAL

Scan for easy install video

http://san.us/410

We’ll Make It Stress-Free

If you have any questions along the way, just give us a call.

1-800-359-5520. We’re ready to help!

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE

Does your TV weigh more than 125 lb (56 kg) including accessories?

—

Perfect!

Yes

—

This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to ﬁnd a compatible mount.

Ready to begin?

Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV

owner’s manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact

Customer Service at 1-800-359-5520 (UK: 0800-056-2853).

Do you have all of the tools needed?

Before getting started, let’s make sure this mount is perfect for you!

What is your wall made of?

Perfect! Perfect! Call 1-800-359-5520 (UK: 0800-056-2853)

Unsure?

Drywall with

wood studs

Solid concrete or

concrete block

1/2 in.

(13 mm)

7/32 in.

(5.5 mm)

Wood

3/8 in.

(10 mm)

Concrete

125 lb

(56 kg)

M6x35 mm M8x35 mm

M4x35 mm M5x35 mm

Spacer

STEP 1 Attach Bracket to TV

Vertical

TV Bracket

08 09

x4 x4

NOTE: Not all hardware included will be used.

WARNING: This product contains small items that could be a choking hazard if swallowed.

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged

item to your dealer; contact Customer Service. Never use damaged parts!

Parts and Hardware for STEP 1

TV Screws

TV Washers

Upper TV Bracket

Lower TV Bracket

01 x1

02 x1

1-1 Select TV Screws

Hand thread screws into the threaded inserts on the back of your TV

to determine which screw diameter (M4, M5, M6, or M8) to use.

1-2 Spacers

CAUTION: Verify adequate thread engagment of the screw/

spacer combination on your TV.

Too short will not hold the TV and too long will damage the TV.

M4 M6 M8

Too Short Correct Too Long

Mount the spacers 10

above the TV bracket,

so the TV bracket sits

close to the TV surface

for Flat Back Panels.

Mount the spacers 10

under the TV bracket to

create extra space needed

for irregular shape TV

backs or large cables.

Spacers and screws are supplied to install your TV bracket.

Determine your preference for spacer configuration when

attaching your TV bracket.

Round Back CablesInset HolesFlat Back

TV Bracket

1-3 Attach TV Brackets

1. Slide the upper 01 and lower 02 TV brackets over the ends of the vertical TV bracket 03 .

2. Position TV bracket assembly over your TV hole pattern, center horizontally and loosely install using the spacer, screw and washer

combination you selected for your TV.

1 2

Tabs

aSpacer, screw and washer

bSpacer, screw and washer

3 6

Spring Screw

Screws

Locator Hole

TV Bracket Hole

Spring

Screw

3. Vertically center the vertical TV bracket 03 .

4. Visually line up the locator holes in the Lower TV bracket 02 with the holes in the vertical TV bracket 03 .

5. Press and turn a spring screw to secure the vertical TV bracket 03 in place. Push and tighten the remaining three spring screws.

NOTE: You may need to slide the vertical TV bracket 03 up or down while pressing in the spring screw to find the first mounting hole

6. Tighten the 4 screws (PAGE 5) on the upper 01 and lower 02 TV brackets.

STEP 2 Attach Wall Plate to Wall

5⁄16 x 3 ½ in.

Sanus Magnetic Stud Finder *

14 x4

11 x1

12 x1

13 x1

15 x4

Parts and Hardware for STEP 2

For wood stud installations, follow STEP 2A on PAGE 8

For concrete installations, follow STEP 2B on PAGE 13

NOTE: Not all hardware included will be used.

WARNING: This product contains small items that could be a choking hazard if swallowed.

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged

item to your dealer; contact Customer Service. Never use damaged parts!

Wall Plate *

Wall Plate

Template

*WARNING:This product contains a magnet. If an implanted medical device such as a pacemaker or implantable cardioverter deﬁbrillator

(ICD) is in use, magnetic ﬁelds may aect the operation of those devices, resulting in serious injury or death. If you have an implanted medical device,

keep at least 13 cm (5 in.) between your device and the magnet. Please consult with your physician or medical professional prior to using this product.

Lag Bolt

Concrete Anchor

STEP 2A Wood Stud Option

CAUTION: Avoid potential personal injuries and

property damage!

●Drywall covering the wall must not exceed

16 mm (5/8 in.)

●Minimum wood stud size: common 51 x 102 mm

(2 x 4 in.) nominal 38 x 89 mm (1½ x 3½ in.)

●Minimum horizontal space between fasteners:

406 mm (16 in.)

●Stud centers must be verified – not all walls have

conventional 406 mm (16 in.) or 610 mm (24 in.)

stud spacing

NOTE: See Introducing Sanus Magnetic Stud

Finder*located in your Welcome folder for more

detailed operation of stud finder.

1. Locate a nail/screw in the studs using the Sanus

magnetic stud finder 13 provided.

2. Find the edges of the studs using the probe

of the stud finder 13 .

3. Mark the centers of the studs with pencil.

*WARNING:This product contains a magnet. If an implanted medical device such as a pacemaker or implantable cardioverter deﬁbrillator (ICD)

is in use, magnetic ﬁelds may aect the operation of those devices, resulting in serious injury or death. If you have an implanted medical device, keep at