Samsung SyncMaster 730MP User manual

Install Drivers Install Pro

rams

Failure to follow directions noted by this symbol could result in bodily harm or damage to

equipment.

Prohibited Important to read and understand at all times

Do not disassemble Disconnect the plug from the outlet

Do not touch Grounding to prevent an electric shock

Power

When not used for extended period of time, set your computer to DPMS.

If using a screen saver, set it to the active screen mode.

Do not use a damaged or loose plug.

zThis may cause an electric shock or fire.

Do not pull the plug out by the wire nor touch the plug with wet hands.

zThis may cause an electric shock or fire.

Use only a properly grounded plug and receptacle.

zAn improper ground may cause electric shock or equipment damage.

Do not excessively bend the plug and wire nor place heavy objects upon them,

which could cause damage.

zThis may cause an electric shock or fire.

Do not connect too many extension cords or plugs to an outlet.

zThis may cause fire.

Installation

Put your monitor in a location with low humidity and a minimum of dust.

zFailure to do so may cause an electric shock or fire inside the monitor.

Do not drop the monitor when moving it.

zThis may cause damage to the product or human body.

Place the monitor on a flat and stable surface.

zThe monitor may cause injury by falling.

Set down the monitor carefully.

zThe monitor could be damaged or broken.

Do not place the monitor face down.

zThe TFT-LCD surface may be damaged.

Installing a wall bracket must be done by a qualified professional.

zInstallation by unqualified personnel may result in injury.

zAlways use the mounting device specified in the owner's manual.

Leave a space for ventilation between the product and the wall.

zPoor ventilation may cause the interior temperature to rise and lead to fire.

To prevent rainwater from running along the outdoor antenna cable and entering the

house, be sure the outdoor portion of the cable hangs down below the point of entry.

zIf rainwater enters the product, it may cause an electric shock or fire.

If you are using an outdoor antenna, be sure to put sufficient distance between your

antenna and the electrical wires nearby so that they would not come in contact with

each other in case the antenna is knocked over by strong wind.

zA knocked-over antenna may cause injury or an electric shock.

Clean

When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a

slightly moistened, soft fabric.

Do not spray water or detergent directly on the monitor.

zThis may cause damage, electric shock or fire.

Use the recommended detergent with a smooth cloth.

If the connector between the plug and the pin is dusty or dirty, clean it properly

with a dry cloth.

zA dirty connector may cause an electric shock or fire.

Contact a Service Center or Customer Center for interior cleaning once a year.

zKeep the product's interior clean. Dust which has accumulated in the interior

over an extended period of time may cause malfunction or fire.

Others

Do not remove cover (or back). No user serviceable parts inside.

zThis may cause an electric shock or fire.

zRefer servicing to qualified service personnel.

If your monitor does not operate normally - in particular, if there are any

unusual sounds or smells coming from it - unplug it immediately and contact

an authorized dealer or service.

zThis may cause an electric shock or fire.

Be careful not to let water drip into the monitor or expose the monitor to

moisture.

zThis may cause malfunction, an electric shock or fire.

zEspecially avoid operating the monitor near water or outdoors where it could be

exposed to snow or rain.

If the monitor is dropped or the casing is damaged, turn the monitor off and

unplug the power cord.

zThe monitor may malfunction, causing an electric shock or fire.

zThen contact the Service Center .

Disconnect the plug from the outlet during storms or lightening or if it is not

used for a long period of time.

zFailure to do so may cause an electric shock or fire.

Do not try to move the monitor by pulling only the wire or the signal cable.

zThis may cause a breakdown, electric shock or fire due to damage to the

cable.

Do not move the monitor right or left by pulling only the wire or the signal

cable.

zThis may cause a breakdown, electric shock or fire due to damage to the

cable.

Do not cover the vents on the monitor cabinet.

zBad ventilation may cause a breakdown or fire.

Do not place water containers, chemical products or small metal objects on the

monitor.

zThis may cause malfunction, an electric shock or fire.

zIf a foreign substance enters the monitor, unplug the power cord and contact

the Service Center .

Do not use or store inflammable substances near the monitor.

zThis may cause an explosion or fire.

Never insert anything metallic into the monitor openings.

zThis may cause an electric shock, fire or injury.

Do not insert metal objects such as utensils, wire or drill bits, or things that

catch fire easily, such as pieces of paper or matches, into the vents, or the

headphone, or A/V ports on the monitor.

zThis may cause malfunction, an electric shock or fire.

zAlways contact the Service Center if foreign substances/objects enter into the

monitor.

If you view a fixed screen for an extended period of time, residual image or

blurriness may appear.

zChange the mode to energy save or set a screensaver to moving picture when

you need to be away from the monitor for an extended period of time.

Adjust the resolution and frequency to the levels appropriate for the model.

zInappropriate resolution may cause undesirable picture quality.

17 inch - 1280 X 1024

Keep the volume at a proper level when you use the headphones.

zExcessively loud volume levels may damage hearing.

Keep a proper distance between your eyes and the monitor screen.

zSitting too close to the monitor on a continuous basis may damage eyesight.

To ease eye strain, take at least a five-minute break after every hour of using

the monitor.

Do not use the monitor where it may be exposed to strong vibrations.

zExposure to strong vibrations may be fire hazard and shorten the life of the

monitor.

When moving the monitor, turn the power switch off and unplug the power

cord.

Make sure that all cables, including the antenna cable and cables connecting to

other devices, are disconnected before moving the monitor.

zFailure to disconnect a cable may damage it and lead to fire or an electric

shock.

When you remove batteries from the remote, be careful that they are not

swallowed by children. Keep batteries out of the reach of children.

zIf swallowed, see a doctor immediately.

When replacing batteries, place the batteries in the correct +/- polarity position

as indicated on battery holder.

zIncorrect polarity may cause a battery to break or leak and could lead to fire,

injury, or contamination (damage).

Use only specified standard batteries. Do not use new and used batteries

together.

zThis may cause a battery to break or leak and could lead to fire, injury, or

contamination (damage).

Do not set a glass of water, chemicals or any small metal objects on the

monitor.

zThis may cause damage, electric shock or fire.

zIf a foreign substance gets into the monitor, disconnect the plug and then

contact a service center.

Please make sure the following items are included with your monitor.

If any items are missing, contact your dealer.

Contact a local deale

to bu

tional items.

Unpacking

Option A

Monitor

Option B

Monitor & WISELINK

Manual

Quick Setup Guide Warranty Card

(

Not available in all locations

)

User's Guide, Monitor Driver,

Natural Color software

Cable

(

tion A

)

D-Sub Cable Power Cord Radio Antenna

Audio Cable Option B

USB Cable

Sold se

aratel

DVI Cable

Others

Remote Control Batteries

(

AAA X 2

)

Connecte

Option B

WISELINK

Front

1. MENU

2. CH

3. + VOL -

4. ENTER/FM RADIO

5. SOURCE

D-Sub Cable Power Cord Radio Antenna

Audio Cable

Cable

(

tion B

)

D-Sub Cable Power Cord Radio Antenna

Audio Cable USB Cable

Sold se

aratel

DVI Cable

Others

Remote Control Batteries

(

AAA X 2

)

Connecte

Front

1. MENU

Other manuals for SyncMaster 730MP

Table of contents

Other Samsung Monitor manuals

Samsung

Samsung PL-42P3S User manual

Samsung

Samsung SyncMaster 320TSn-3 User manual

Samsung

Samsung SyncMaster F2370H User manual

Samsung

Samsung S27CM500EE User manual

Samsung

Samsung UH46F5 User manual

Samsung

Samsung QB65H-TR User manual

Samsung

Samsung 460DX - SyncMaster - 46" LCD Flat Panel... Installation guide

Samsung

Samsung SAMTRON 58V User manual

Samsung

Samsung SyncMaster S19C450BR User guide

Samsung

Samsung F27T85 Series User manual

Samsung

Samsung SyncMaster 913T User manual

Samsung

Samsung SyncMaster 650FP User manual

Samsung

Samsung 940UX - SyncMaster - 19" LCD Monitor User manual

Samsung

Samsung SyncMaster 225UN User manual

Samsung

Samsung SyncMaster 720B User manual

Samsung

Samsung SyncMaster 2243LNX User manual

Samsung

Samsung TC222T User manual

Samsung

Samsung 2233SW - Full HD Widescreen LCD Monitor User guide

Samsung

Samsung S24C650BW User manual

Samsung

Samsung CKB5237L User manual

Samsung

Samsung 725D User manual

Samsung

Samsung CSR5987 Reference manual

Samsung

Samsung SyncMaster 591V User manual

Samsung

Samsung SyncMaster P2050 User guide

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual