Ruida Technology RDWelder-SW User manual
Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287
202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA
1
RDWelder-SW
Handheld Laser Welding System User Manual
Please read the manual carefully before using the controller
➢The manual is about system operation.
➢Read the manual carefully to ensure the
correct connection between gas and
electricity.
Shenzhen Ruida Technology Co., Ltd
Address: 202-203,B-Block,Technology Building, 1057 Nanhai
Avenue,Nanshan District,, SHENZHEN, CHINA
Tel: 0755--26066687
Fax: 0755--26982287
E-mail: [email protected]
Web: www.rd-acs.com
Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287
202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA
2
Copyright notice
Shenzhen Ruida Technology Co., Ltd. (hereinafter referred to as Ruida Technology)
reserves all rights.
Ruida Technology has the patent copyright and intellectual property rights of this
product, without the license and license of Ruida Technology, may not directly or indirectly
copy, manufacture, process, use of this product and its related parts, otherwise Ruida
Technology will be investigated for the relevant legal responsibilities in accordance with
the law.
Regal Technologies reserves the right to modify documents such as products and
product specifications in this manual without prior notice, and the right to modify any
documentation that comes with this product.
Users should read this manual carefully when using the products described herein,
and Regal Technologies shall not be liable for any direct, indirect, special, incidental or
consequential loss or liability arising from the improper use of this manual or this
product. Ruida Technologies does not assume any direct or indirect liability or loss as
follows:
➢The user uses this manual or this product incorrectly
➢Losses caused by the user not following the relevant safety procedures
The loss caused by natural forces makes the machine in motion dangerous, the
user is responsible for designing an effective error handling and safety protection
mechanism in the machine, and Ruida Technology has no obligation or responsibility to
be responsible for the consequential or corresponding losses caused by it.
Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287
202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA
3
CERTIFICATION STATEMENT
CE Certification statement
This product has passed the European Union CE (CONFORMITE EUROPEENNE) safety
certification, has passed the corresponding conformity assessment procedures and the
manufacturer's declaration of conformity, and complies with the relevant EU directives.
ROHS Certification statement
This product has passed the "Restriction of Hazardous Substances" safety certification
established by EU legislation and complies with relevant EU environmental protection regulations.
FCC Certification statement
This product has passed the Federal Communications Commission safety certification and
complies with relevant US electronic product safety regulations.
Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287
202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA
4
SAFETY INFORMATION
Please make sure that the operation is correct and the method is safe when using
the system. Some signs or words will be used to remind you of dangerous matters
and some important information.
Danger:
It indicates a serious danger. In the process of using, if improper operation or
wrong usage method may cause serious injury or even death to the personnel,
please do not use it easily until the operation method is correct and the usage
method is correct.
Warning：
It indicates a serious danger. In the process of using, if improper operation or
wrong usage method may cause injury to the personnel, please do not operate it
until the operation method is correct and the usage method is correct.
Cautious：
It indicates potential product risk. In the process of using, if the use method is
incorrect or the operation is improper, it may cause damage to the product or
some parts. Please do not use it until it is ensured that the operation method is
correct and the use method is correct.
Important:
It indicates important information that needs attention during the use of the
product. Please do not ignore this information, it will provide effective
operation assistance.
This mark indicates laser radiation, which is generally attached to products
that output laser. When using such equipment, please be careful with laser and
pay attention to safety.
Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287
202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA
5
Receiving, Unpacking, Inspection
The product is packed in an antistatic bag. If the package has any external damage, please check the
goods and notify the carrier of the damage situation in written form.
Important:
After receiving the products, please check whether the outer packaging is in good
condition, whether the product is complete after unpacking, and whether the parts
are in good condition. If there is any damage, please contact RUIDATechnology.
Keep the packaging materials and wiring accessories when unpacking. Please be careful when
disassembling the package.After unpacking the goods, please check if the parts are complete. If you
find that the parts are missing or the parts are damaged, please contact Ruida immediately.
RDWelder-SW handheld laser welding system shipping list is shown below: (as the product is
updated constantly, the accessories received may be different from this manual)
Component
Quantity
Description
RDWelder-SW-General-Welding mainboard
1
LCD terminal-XRD-RD63X-T70-15R
1
Touch screen fixed buckle (with screw)
4
DB9 male-welding wire
1
DB15-VGA case
1
3.81MM-curved plug-KF-3P socket-Green
1
3.81MM-curved plug-KF-4P socket-Green
1
3.81MM-curved plug-KF-6P socket-Green
1
Touch screen 4-core cable-1.5m-Black
1
Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287
202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA
6
Contents
Chapter 1 Overview ........................................................................7
1.1 HANDHELD LASER SYSTEM INTRODUCTION .................................................8
1.2 MOUNTED DIMENSION ..................................................................8
1.2.1 Touch Screen Dimension...........................................................8
1.2.2 Mainboard Mounted Dimension .....................................................9
Chapter 2 System Wiring...................................................................11
2.1 SYSTEM WIRING ......................................................................12
2.2 POWER INTERFACE....................................................................13
2.3 HMI INTERFACE ......................................................................13
2.4 LASER SOURCE INTERFACE .............................................................14
2.5 GALVANOMETER INTERFACE.............................................................15
2.6 DIGITAL IO INTERFACE .................................................................16
Chapter 3 HMI Operation Introdution ………. ..................................................19
3.1 HMI FUNCTION INSTRUCTION ...........................................................20
3.2 HMI OPERATION INTRODUCTION .........................................................21
3.2.1 Parameter Setting................................................................21
Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287
202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA
7
Chapter 1 Overview
Main contents：
Handheld laser welding system introduction
Mounted Dimension
Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287
202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA
8
1.1 Handheld Laser System Introduction
The handheld laser welding system is a controller developed by Ruida Technology for fiber laser welding. It
supports double galvanometer motor control, different swing types, automatic wire feeding, slow rise and fall of
laser power, gas on in advance, gas off delay. The system is easy to operate and can display real-time input and
output IO status, alarm information and motion status, etc.
1.2 Mounted Dimension
1.2.1 Touch Screen Dimension
The touch screen dimension is shown below:
Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287
202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA
9
1.2.2 Mainboard Mounted Dimension
The mainboard mounted dimension is shown below:
Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287
202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA
10
140mm
110mm
5mm
φ3
注：其他三个螺丝孔距离边界的距离均为5mm
5mm
1 2 3 4 5 6
1 2 3 4 5
1 2 3 4 1 2 3
Table of contents
Popular Welding System manuals by other brands
TAFA
TAFA 30*8B35 owner's manual
Lincoln Electric
Lincoln Electric INVERTEC V350-PRO CE Technical specifications
ESAB
ESAB Buddy Arc 145 instruction manual
CIGWELD
CIGWELD 636804 use instructions
Red-D-Arc
Red-D-Arc DC-400 Operator's manual
Hobart Welding Products
Hobart Welding Products Spool Gun DP 3035-10 owner's manual
