Rowkin BCT User manual
BIT
CHARGE
TOUCH
TRUE WIRELESS
User Manual
WELCOME
Welcome to your True Wireless
experience. This quick start guide will
take you step-by-step so that you can
what Rowkin users do: keep moving
forward.
User Manual
CONTENTS
1
2
3
4
5
6
User Manual
What You Get
What Does What
Sync and Pair
Your Earbuds
Charging and
Battery Levels
How to Reset
Advanced Stuff
7Sorry... We Have To.
1. WHAT YOU GET
User Manual
In the box you get 2
Bluetooth earbuds, 1
Dual-Function
Portable Charger,
and 1 USB Charging
Cable.
We also provide you with 3
sizes of ear tips: Small,
Medium, and Large. Because
not all ears are the same!
2. WHAT DOES WHAT
User Manual
Touch Control
Surface
Built-in-Mic/
LED Indicator
CONTROLS
Press either earbud for 3 seconds (audible beep
for confirmation) to answer incoming call.
Press either earbud for 3 seconds.
Triple tap to reject incoming call.
Double tap to mute your call.
Hang up first and press either earbud for 3 seconds
to answer a second incoming call.
Answer call:
End call:
Reject call:
Mute Mic:
Second call:
Press either earbud for 5 seconds to answer the
second incoming call and place the first call on hold.
Place on hold:
Note: Please ensure your mobile device supports voice command function for this feature.
R Earbud:
Triple tap for
Google Assistant or Siri
Double tap to
Play/Pause.
L Earbud:
Either Earbud:
Triple tap to go
to previous track.
Double tap to go
to next track.
Battery Indicator
USB Port
Charging Port
3. SYNC & PAIR YOUR EARBUDS
User Manual
For Subsequent Use:
• To Power ON: Simply take the earbuds out of
the case.
• To Power OFF: Place in the case. If you don’t
want to put the earbuds back in the case,
simply press and hold the button for 5 seconds
until you hear “Power Off".
Wait for
6-8 sec. Wait
5 sec.
Primary
(Right Channel)
Primary
(Right Channel)
1. Take earbuds out of
case and place next
to each on a flat
surface. Be sure to
place on the ear tip or
on the side so you can
see the LEDs.
2. The Red LED will
be lit for 5 seconds.
While syncing, both
earbuds will flash
white.
3. Once the
earbuds are synced
to each other, the
Right earbud will
flash red and white
to indicate it has
entered pairing
mode.
4. Go to Bluetooth
settings on your
device and select
“Rowkin Bit Touch R.”
Once the LED stops
flashing on the Right
earbud, you are
connected and ready
to go.
User Manual
To charge your headphones
place both headphones in
the charging case.
To charge your other
devices, plug any USB
cord in the charging
case and then
connect your device.
To charge the Charging
Case, plug the Micro-USB
cable into the port on
the bottom of the case.
Battery Level Indicator LED
4. CHARGING AND BATTERY
LEVELS
25% 50% 75% 100%
Flash 1X Flash 2X Flash 3X Flash 4X
Step 1
Step 2
5. HOW TO RESET
User Manual
Place earbuds in the
Micro charging case.
Step 3
Hold the control buttons until you see
the lights flash white twice.
Step 4
Go back to pair and sync instructions.
Press down on both control
buttons and hold for about 10 sec.
If you ever need to reset your device
follow these instructions:
6. ADVANCED STUFF
User Manual
SPECIFICATIONS
Dimension:
Earbud: 0.55”(D) x 0.82”(L) (14x21mm)
Portable charging case:
Size: 3.58" x 1.61" x 0.93"
(91mm x 41mm x 23.5mm)
Weight:
Earbud: 0.18oz (5.2g) each
Portable charging case: 2.93oz (83g)
Battery type:
Rechargeable lithiumion polymer battery
Battery input:
Earbud: 5V / 35mA
Portable charging case: 5V / 1A
To earbuds: 5V / 200mA
USB Output: 5V/0.5A
Battery output (Portable charging case):
Battery capacity:
Earbud: 55mAh
Portable charging case: 2100mAh
Charging time:
Earbud: ≤90 minutes
Portable charging case: ≤150 minutes
Standby time (power on):
Standby time (power off):
Bluetooth profiles:
about 27 hours
about 120 days
Music time: up to 3.5 hours
Talk time: up to 3.5 hours
Frequency response: 20Hz-20kHz
Bluetooth version: 5.0 Certified
HFP, HSP, AVRCP, A2DP, and SPP
Audio enhancements:
Noise reduction and echo cancellation
PROBLEM PROBABLE CAUSE SOLUTION
Sound breaks up or fades
in and out
TROUBLESHOOTING
Headset is too far away
from the source device;
Interference between the
headset and the source
device; The human body
may interfere and weaken
signal in some conditions.
Keep source device close and
in direct view of the headset.
Do not cover with
your hands or arms.
The other party on the call
can’t hear my voice
Environment is too noisy;
Headset is covered during
the call, for example, by
hair or hands.
Remove anything covering
the headset; Speak louder
and call in a quiet environ-
ment.
My earbud doesn’t power
on when removed from
the case.
The earbuds were not
connected firmly in the
case while charging.
Make sure the earbud indica-
tor is flashing while in the
case to confirm charging.
Earbuds can be powered on
manually by pressing the
button for 3 sec.
For the best Bluetooth connection, keep source device in direct view of the
headset. The human body may interfere and weaken signal in some conditions.
7. SORRY... WE HAVE TO.
User Manual
Table of contents
