Need Help? Our friendly, knowledgeable Ross Video Technical Support staffare always available!
• Telephone +1 613-652-4886; or toll-free 1-844-652-0645 (North America), +800 1005 0100 (International)
• Contact the ROSS VIDEO | HELP CENTER at https://support.rossvideo.com/hc/en-us
2
7) Access the Camera Web Interface
The web interface enables you to configure camera settings and view camera video, using a web browser.
a) On a computer connected to the same network as the camera, launch a web browser.
b) In the address bar of the web browser,
type the IP address of the camera, and
then press Enter.
The login page of web interface appears:
Tip: You can use the remote control to
view the IP address. Press Menu >
Ethernet > IP Address.
c) Provide the User Name and Password,
and then click the Login button.
The login page of web interface appears.
Tip: The default User Name is admin.
The default Password is 9999.
6) Camera Networking
a) Connect all cameras and control systems to the same network.
b) Use the remote control to either turn on DHCP or to assign each
camera a unique IP address:
• To turn on DHCP, select Menu > Ethernet > DHCP > On.
Note: The network must be configured for DHCP.
• To assign an IP address, select Menu > Ethernet > IP Address,
and then specify the IP address.
Tip: The default IP Address is 192.168.100.100.
5) Providing Power to the Camera
To power the camera, do one of the
following:
• Connect the provided 12 VDC power
supply unit.
• Using CAT6 network cable, connect the
Ethernet port of the camera to a
network router or hub that supports
Power over Ethernet (PoE).
The camera requires PoE++
(IEEE802.3bt).
Camera
CAT6 Network Cable
Camera CameraCamera
Router
(PoE++ capable)
Control
Computer
Router
(PoE++ capable)
Camera Web Interface
