Rosewill RC-303 User manual

2-Serial/1-Parallel Port PCI Adapter RC303

User Manual

2-Serial/1-Parallel Port PCI Adapter RC303 User Manual

Overview

This PCI I/O card is a dual UART with 1284 printer interface port controller with PCI bus interface and

uses an all-in-one solution from NeMos Technology, which provides superior performance and

unmatched data transfer rates. The most advanced feature is it uses of a single interrupt, which is set

automatically by the host system and share among all on-board I/O ports and supports printer interface

as well as PS2, EPP & ECP modes.

Features

zChipset: NetMos Nm9835

zOS power: Single 5V operation

zBus: PCI 2.1s 32bit, 33MHz

zData Transfer Rate: 1Mbytes/s (serial port)

zData Transfer Rate: 1.5Mbytes/s (parallel port)

zSelectable receive trigger levels

zPCI compatible Dual UART

zMulti-mode compatible controller (SPP, PS2, EPP& ECP)

zModem control signals

zOn chip oscillator

z16Byte transmit-receive FIFO (UART)

zSoftware programmable mode selects

zProgrammable baud rate generator

zSupport plug & play features and makes installation fast and easy.

zSupports Windows98, Windows95, Windows2000 & Windows NT 4.0.

Installing the PCI I/O controller card into your computer

Turn off your computer and all external devices connect it.

Remove the computer’s cover. Refer to your computer user’s manual for more details.

Find an available PCI slot and remove the metal bracket. Save the bracket screw for later use.

Align the PCI I/O controller horizontally with respect to the PCI slot and insert it into the slot firmly and

evenly. Take care not to force it into the slot. Once you have properly positioned the PCI I/O controller

card into the slot, fasten it to the computer case with the bracket screw you have saved.

Replace the computer’s cover.

Turn your computer on. You are now read to install the driver!

Driver Installation

Windows 95/98/2000

Once the PCI I/O card is installed and the computer is restarted, Windows will detect the board and

attempt to install driver for it.

2-Serial/1-Parallel Port PCI Adapter RC303 User Manual

Start Windows 95/98/2000/XP.

The“Update Device driver Wizard” will appear,

informing you that it has found a “PCI I/O Card”.

Click the “Next” button.

Click “Other Location” for Windows 95 or

“Specify a location” for Windows 98 to install

the driver.

Insert the driver CD in CD-ROM drive (D) and

click on the “Browse” button.

Windows 98/95/2000 will automatically locate

the driver in the driver diskette. Click the “OK”

button to continue.

Click on the finish button to start copying files

from driver diskette..

2-Serial/1-Parallel Port PCI Adapter RC303 User Manual

Windows 98/95/2000 will automatically restart in order to update the hardware configuration.

Once Windows 98/95/2000 has restarted, you can now connect your external devices to the PCI I/O card. To install

the driver for the external devices, please refer to the external device user’s manual.

Windows NT 4.0

zMake sure Windows NT 4.0 is properly installed into your system first.

zStart Windows NT.

zInsert Windows NT 4.0 driver diskette (disk 2) into the floppy drive.

zSelect “RUN” option in Windows NT.

zAt the “RUN” option, click on the“Browse” button.

zAt the Browse for Folder window:

zSelect “Floppy (A)”

zDouble click on the winnt folder

zSelect NetMosXXX drivers.exe

zClick on the Open button

zFinally, click the“OK” button

zFollow the instructions to finish up the driver installation. Your system will automatically restart in

order to complete the driver installation.

zInstalling DOS Driver

zCopy “NMDOSIN.EXE” to your hard disk and run “NMDOSIN.EXE”

zUpdate Drivers

zPlease visit this website: http:/www.rosewill.com/for all the latest drivers for your PCI I/O card.

Thank you for purchasing a quality Rosewill Product.

Please register your product at : www.rosewill.com/ for complete warranty information and future support for your

product.

Table of contents

Other Rosewill PCI Card manuals

Rosewill

Rosewill RC-100 User manual

Rosewill

Rosewill RC503 User manual

Rosewill

Rosewill SATA II 4 Port PCI RAID Card RC217 User manual

Rosewill

Rosewill RC-NIC412 User manual

Rosewill

Rosewill RC-301EU User manual

Rosewill

Rosewill RC508 User manual

Rosewill

Rosewill RC-400 User manual

Rosewill

Rosewill RC500 User manual

Rosewill

Rosewill RC-110 User manual

Rosewill

Rosewill RC205 User manual

Rosewill

Rosewill RC-101 User manual

Rosewill

Rosewill RC-302E User manual

Rosewill

Rosewill RC304-E User manual

Rosewill

Rosewill RC-20003 User manual

Rosewill

Rosewill SATA 150 RAID 2 Port PCI Host RC201 User manual

Rosewill

Rosewill RC-223 User manual

Rosewill

Rosewill RNX-N300X User manual

Rosewill

Rosewill RC-300 User manual

Rosewill

Rosewill RC-305E User manual

Rosewill

Rosewill RC-305 User manual

Rosewill

Rosewill RC-302 User manual

Rosewill

Rosewill RNX-N300 User manual

Rosewill

Rosewill RC303 User manual

Rosewill

Rosewill RC-209-EX User manual

Popular PCI Card manuals by other brands

ERMA

ERMA SSI 1417 instruction manual

SIIG

SIIG CyberSerial Dual PCI Software installation

Moxa Technologies

Moxa Technologies CP-102E Quick installation guide

I-Bus

I-Bus IBC2602 user guide

Exsys

Exsys EX-60102 manual

Chelsio Communications

Chelsio Communications T5 Series Installation and user guide

Conrad Electronic

Conrad Electronic 97 46 71 operating instructions

Micro Innovations

Micro Innovations USB650A Quick installation guide

KTI Networks

KTI Networks KF-310 user guide

Asus

Asus SpaceLink WL230 user manual

SIIG

SIIG SC2475 Quick installation guide

TRENDnet

TRENDnet TEW-703PI Quick installation guide

Belkin

Belkin F5D7000F user manual

Pericom

Pericom PI7C7100 manual

ADLINK Technology

ADLINK Technology cPCI-3548 user manual

Digium

Digium TE200 Series user manual

Allo.com

Allo.com 2nd Gen E1/T1/J1 Quick installation guide

Western Digital

Western Digital FireWire PCI Adapter installation guide