Ronix RP-U130 User manual
UNIVERSAL PRESSURE
WASHER 130BAR
RP-U130
USER MANUAL 3
SPECIFICATIONS
PARTS LIST
1) On/off switch
2) Adjustable Lance
3) Water inlet
4) Water outlet
5) Spray Gun
6) Trigger
7) Gum lock
8) High Pressure Hose
9) Trigger
10) Power cord
11) Detergent Bottle
1
Model RP-U130
Power 1600W
Voltage 220V
Frequency 50Hz
Protection class II
Degree of protection IPX5
Rated pressure 90 Bar
Max. pressure 130 Bar
Rated ow 5.5 L/min
Max. ow 7.2 L/min
Rated temperature 0 - 40°C
Max inlet pressure 0.7MPa
Sound pressure level Uncertainty LpA=77 dB(A) - KPA=3dB
Sound power level Uncertainty LwA=90dB(A)
Weight 9.3Kg
HIGH PRESSURE WASHER
4
12) Wheel
13) Turbo lance
PRODUCT DESCRIPTION
.PURPOSE
- The high pressure cleaner is designed to clean vehicle,
machines, buildings, facades, etc. in the private sector.
.AREAS OF APPLICATION
- Never use the machine in potentially explosive areas under
any circumstances!
- The operating temperature must be between 0 and +40°C
- The machine consists of an assembly with a pump, which
is encased in a shock absorbing housing. For an optimal
working position the machine come with a lance and a
non-slip handle grip, whose shape and conguration comply
with the applicable regulations.
- Do not cover or modify the lance or the spray nozzles in
any way.
- The high pressure cleaner is designed to be used with cold
or lukewarm (max.60); higher temperatures can damage the
pump.
- Do not use water that is dirty, gritty or contains any chemical
products, as these could impair operation and shorten the life
of the machine.
- Accessories can be used to carry out work with foam
cleaners, sand spraying.
2
USER MANUAL 5
IMPORTANT:
This machine is not suitable for connection to the potable
water mains.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
This appliance is not intended for use by children or other
persons without assistance or supervision if their physical,
sensory or mental capabilities prevent them from using it
safely.
Children should be supervised to ensure that they do not
play with the appliance.
Before starting up your machine please check it carefully
for any defects. If you nd any, do not start up your machine
and contact your distributor.
.ESPECIAL CHECK
The insulation of the power cord should be faultless and with-
out any cracks. If the power cord is damaged, an authorized
distributor should replace it.
WARNING!
- Do not use this appliance without reading this instruction
sheets.
- The electric supply connection shall be made by a qualied
electrician and comply with IEC60364-1.
- The electric supply to this appliance should include either
a residual current device that will interrupt the supply if the
leakage current to earth exceeds 30Ma for 30ms or device
3
HIGH PRESSURE WASHER
6
that will interrupt the earth circuit.
WARNING!
This appliance has been designed for use with the cleaning
agent supplied or recommended by the manufacturer. The
use of other cleaning agents or chemical may adversely
affect the safely of the appliance.
WARNING!
Do not use the appliance within range of person unless
they wear protective clothing.
WARNING!
- High pressure jets can be dangerous if subject to misuse.
The jet mast not be directed at persons, live electrical
equipment or the appliance itself.
- Do not direct the jet against yourself or others in order to
clean clothes or foot-wear,
- Risk of explosion – do not spray ammable liquids.
- Disconnect from the electrical power supply before carrying
out user maintenance.
- High pressure cleaners shall not be used by children or
untrained personnel.
- To ensure appliance safety, use only original spare parts
from the manufacturer or approved by the manufacturer.
WARNING!
Water that has own through backow preventers is considered
to be non-potable.
4
USER MANUAL 7
WARNING!
The machine shall be disconnected from its power source
during cleaning or maintenance and when replacing parts
for mains operated machines by removing the plug from
the socket-outlet.
WARNING!
High pressure hoses, ttings and couplings are important for
safety of the appliance. Use only hoses, tting and couplings
recommended by the manufacturer.
- Do not use the appliance if a supply cord or important
parts of the appliance are damaged, e.g. Safety devices,
high pressure hoses, trigger gun.
WARNING!
If an extension cord is used, the plug and socket must be
of watertight construction.
WARNING!
Inadequate extension cords can be dangerous.
- This high pressure washer must not be used at temperatures
below 0°C.
WARNINIG!
- Cord on drums should always be completely un winded
to prevent the cord from overheating.
- If an extension cord is used, the plug and socket must be
of watertight construction.
- Inadequate extension cords and be dangerous.
- Comply with the below-mentioned requirements for length
and cored dimensions.
5
HIGH PRESSURE WASHER
8
1.0mm max.12.5m
1.5mm max. 20m
2.5mm max. 30m
- Power cord connections should be kept dry and off the
ground.
- If the power cord is damaged, it must be replaced by
the manufacturer or his service agent or similarly qualied
person in order to avoid a hazard.
- All keep the machine on a stable and at surface during
operation, handling, transportation and storage. Sudden
overturn of machine will cause injury to body.
- In the event of accident or breakdown, switch off the ma-
chine immediately. (e.g. contact with detergent: rinse with an
abundance of clean water.
ATTENTION:
Through poor conditions of the electrical MAINS, shortly
voltage drops can appear when starting the EQUIPMENT.
this can inuence other equipment (e.g. Blinking of a lamp).
If the MAINS-IMPEDANCE Zmax <0.335 OMH, such
disturbances are not expected. (in case of need, you may
contact your local supply authority for further information.)
WARNING!
ELECTRICAL SHOCK HAZARD
Improper connection of the equipment – grounding con-
ductor can result in a risk of electrical shock. Check with
a qualied electrician or service person if you are unsure
if an outlet is properly grounded. DO NOT modify the plug
provided with the appliance to t an outlet, have a proper
outlet installed by a qualied electrician.
6
USER MANUAL 97
.MAINS POWER CONNECTION
The following should be observed when connecting the
high pressure washer to the electric installation:
- The electric installation shall be made by a certied electrician
and comply with IEC-364.
It is recommended that the electric supply to this appliance
should include either a residual current device that will interrupt
the supply if the leakage current to earth exceeds 30 mA
for 30 ms.
IMPOTANT:
Only use water without any impurities. If there is a risk of
running sands in the inlet water (i.e. from your own well),
an additional lter should be mounted.
- Safety devices
- The unloader valve can reduce pressure if it exceeds pre-
set values. the spray gun features a looking device. When
the pawl is activated, the spray gun cannot be operated.
- Thermal sensor
A thermal sensor protects the motor against overloading.
Machine will restart after a few minutes when the thermal
sensor has cooled.
ASSEMBLY
-Position the washer as NEAR as possible to the water
supply.
- The washer must be used standing on a secure, stable,
positioned as shown.
HIGH PRESSURE WASHER
10
- Fit the lance into the gun and rotate it until the two parts
are completely locked.
- Connect the gun to high pressure hose.
- Connect the high pressure hose to the water outlet on
the washer.
- Connect the water supply hose to female coupler. Then
connect to the water inlet of the washer. The supply hose
8
Table of contents
Other Ronix Pressure Washer manuals
