RollEase R Series User manual
RollEase Distribution Center
320 Expo Boulevard
Lenoir, NC 28645 USA
RollEase West
7310 West Roosevelt Street, Suite 26
Phoenix, AZ 85043 USA
Office: 623.936.5818
Order Fax: 623.936.5294
RollEase Headquarters
200 Harvard Avenue
Stamford, CT 06902-6320 USA
Office: 203.964.1573 / 800.552.5100
Fax: 203.964.0513 Order Fax: 203.358.5865
©2012 RollEase, Inc. www.rollease.com
Test Data:
•
Meets WCMA standards for tension devices.
•
Tested to ensure 10 year life of product.
Order Information:
•
RE0051203 (Carton of 10)
•
RE0051303 (Bulk box of 250)
Engineered
TM
Technology Built-In!
Safety Instructions:
A WCMA 5.2.4 Warning Tag (available from RollEase
®
) must be fastened to the
loop or device prior to shipping.
The SafetyHold3 must be
secured to the clutch or headrail
to make the shade inoperable
without purposeful action
of installer.
Installation Instructions:
To ensure safety, SafetyHold3 must be installed properly following these five
steps.
Locking Insert
45
Thread bead chain (or
cord) through base
and around guide (flat
side of base facing
guide).
1
Squeeze guide legs while
sliding spring over guide
completely. (Be sure spring
is all the way over the legs
of the guide).
Slide base, flat side
down, over curved end
of guide.
Using screws provided, install
tension device with maximum
tension on the loop while still
allowing ease of operation
Parts Included:
Patented Device:
RollEase offers this patented device for cord loops and bead
chain loops. SafetyHold3 complies with the WCMA-ANSI
standard 5.2.4 that requires a tension device to make the
shade partially inoperable unless the device is installed.
The tension device is designed for continuous cord or bead
chain loops that allows stop balls and/or connectors to pass
through.
Push insert into guide until
rounded edge is resting on
the bead chain. (For cord,
flip insert so opposite
side with serrated edge is
resting on cord.)
23
Guide Insert
Base Spring Screws
Use appropriate anchors
when installing.
New stylish, clear device helps keep children safer by tying down loose window covering
bead chain and cord loops. RollEase®ChildSafe™technology is built into every SafetyHold3™
makingbead chains and cords safer when installed properly.
/ Rev: May, 2013
BeadChain or Cord Loop Tension Device
Sa
fetyHold
TM
3
Other RollEase Window Blind manuals
Popular Window Blind manuals by other brands
Current
Current E-WAND Installation manual and user's guide
weinor
weinor VertiTex ZipR Maintenance Instructions and Directions for use for the end user
Roto
Roto ZAR M R4/R7 Mounting instructions
SOMFY
SOMFY Movelite WT Series instructions
Acmeda
Acmeda RF400 Series instructions
Motura
Motura Pli_353/3 manual