4
Connect the VR-6HD and your wireless LAN master device using a LAN cable, so that you can wirelessly connect to the iPad via the wireless LAN
master device.
LAN cable
* See the Owner’s Manual of the wireless LAN master device for how to use
that device.
* The wireless LAN (Wi-Fi) connection speed and connectivity may be
unstable in certain network environments.
VR-6HD
1. Use a LAN cable to connect the LAN port on your wireless
LAN master device to the DIRECT STREAM port on the
VR-6HD.
* Do not connect to the internet port or WAN port.
2. Turn on the wireless LAN master device and enable DHCP
server functionality on the wireless LAN master device.
3. Power-on the VR-6HD.
4. [MENU] button Ó“NETWORK” Óset “CONFIGURE” to
“USING DHCP”, and press the [VALUE] knob.
The IP address, subnet mask, and default gateway are obtained
automatically.
5. Use the [VALUE] knob to select “NETWORK PASSWORD”,
and press the [VALUE] knob.
The NETWORK PASSWORD screen appears.
6. Set a network password (four characters).
Input the password that’s set here when accessing the VR-6HD
from VR-6HD Remote.
7. Use the [VALUE] knob to select “NETWORK
INFORMATION”, and press the [VALUE] knob.
The Network Information screen appears.
When “CONNECTED” is shown in“LINK STATUS”, the VR-6HD
connection settings are nished.
8. Press the [MENU] button to close the menu.
iPad
1. Connect your iPad via Wi-Fi (wireless LAN).
1
Turn Wi-Fi on in the Settings menu.
2
From the list of networks, tap the wireless LAN master device to
which the VR-6HD is connected.
3
Enter the password listed on the wireless LAN master device,
and tap “Connect”.
2. Launch the VR-6HD Remote app.
3. Tap the CONNECT [SETUP] button.
4. Tap the [LAN] button.
5. Input the “IP ADDRESS”and “NETWORK PASSWORD”
elds, and tap the [CONNECT] button.
IP ADDRESS
Input the IP address of the VR-6HD.
Check this by pressing the [MENU] button on the
VR-6HD and selecting “INFORMATION” Ó“NETWORK
INFORMATION”.
NETWORK
PASSWORD
Input the network password (four characters) set on
the VR-6HD.
When the status icon changes to“LAN”, the device is connected.
Connecting via Wireless LAN (Wi-Fi)
