Roland MMP-2 Manual
40457423 4*REC
About the Phantom Power of the MMP-2
Limitations and Conditions of Condenser Microphone
The phantom power source of MMP-2 can drive Condenser Microphones
with electrical specification 6.0mA or lower at 48V. Microphones that require
more ampere is not supported. Please use phantom power supply devices
separately.
Please see owner's manual of microphones regarding specification or
conditions of use.
About Input Jacks
Phantom power is not supplied to 1/4 inch TRS phone jacks. If your
microphone requires phantom power, please connect it to XLR jacks.
When Turning On/Off...
Please turn the volume of the audio mixer down (off) before switching
the phantom power function on/off on the MMP-2. This will prevent any
damage to your amp and speakers, as a loud noise will be output from the
MMP-2 when phantom power is switched on/off.
Other manuals for MMP-2
1
Table of contents
Other Roland Amplifier manuals
Roland
Roland PA-120 User manual
Roland
Roland SIP-300 User manual
Roland
Roland CUBE-20GX Setup guide
Roland
Roland CM-220 User manual
Roland
Roland AC-40 User manual
Roland
Roland KC-550 User manual
Roland
Roland VGA-3 User manual
Roland
Roland AC-90 Acoustic Chorus User manual
Roland
Roland CK-100 User manual
Roland
Roland BA-55 User manual
Roland
Roland SA-300 User manual
Roland
Roland SRA-50 User manual
Roland
Roland SPA-60 User manual
Roland
Roland TDA-700 User manual
Roland
Roland D-Bass 115 User manual
Roland
Roland KC-100 User manual
Roland
Roland Blues Cube Stage User manual
Roland
Roland CB-20XL Setup guide
Roland
Roland Cube-60 Bass User manual
Roland
Roland SA-1000 User manual
