RODCRAFT WP50P User manual

WP30P / WP50P / WP75P / WP100P- Instructions for lifting and lowering the table

www.rodcraft.com

SAFETY INSTRUCTIONS

• Never exceed the rated capacity of the press.

• Keep unauthorised persons, particularly children, away from the work area.

• Do not introduce hands or any other part of the body in the work area.

• Always use ocular and facial protection.

• Never wear baggy clothes, ties, watches, rings, chains, etc. when using the

press.

• Long hair should be tied up.

• Prior to use, make sure the press is securely anchored.

• Use appropriate guarding to contain any pieces that may break or fly apart

when applying force.

• Use only press accessories having a capacity rating equal to or greater than

the capacity of the press.

• Verify lift cables are slack before pressing on the bolster.

• Avoid off-center loads.

• The V-blocks must be used in pair, not by piece!

• Only one person at a time should operate the press.

• The operator must wear protective cloth, gloves, safety helmet, shoes and

ear protector during operating.

• To avoid accidents, always be aware of any on-going work on the machine.

Also, always stay focused on the job to be done.

WARNING

Lower lock pins

Table

Upper lock pins

Winch

Cable

Safety

8956001351 Rev.02 - 02/2017

WP30P / WP50P / WP75P / WP100P - Instructions for lifting and lowering the table

www.rodcraft.com Page 2/2

Lifting the table

•

WARNING

While lifting the table, the 2

lower lock pins must remain in position.

1. Remove the upper lock pins.

2. Lift the table using the winch and adjust the height of the

table to allow the positionning of the lock pins in the holes.

3. Insert the upper lock pins with the safety pins.

4. Remove and Insert the lower lock pins to a new position.

Insert the safety pins.

5. Always operate the winch in order to release tension

of the cables.

Caution

When using the press,

The cables must always be loose. The cables

must not carry any load.

Lowering the table

1. Remove and insert the 2 lower lock pins to a new

postion.

WARNING

While lowering the table, the 2

lower lock pins must remain in lock position.

2. Apply tension on the table using the winch and remove

the upper lock pins.

3. Lower the table using the winch and adjust the height

of the table to allow the positionning of the lock pins.

4. Insert the upper lock pins with the safety pins.

5. Always operate the winch in order to release tension

of the cables.

Caution

When using the press,

The cables must always be loose. The cables

must not carry any load.

INSTRUCTIONS FOR MOVING THE TABLE

Caution

Never lower or lift the table with a load, the table must be free of load.

This manual suits for next models

Table of contents

Other RODCRAFT Power Tools manuals

RODCRAFT

RODCRAFT RC3607 User manual

RODCRAFT

RODCRAFT RC3000 User manual

RODCRAFT

RODCRAFT 8951000330 User manual

RODCRAFT

RODCRAFT RC6605RE User manual

RODCRAFT

RODCRAFT PREMIUM RC3605 User manual

RODCRAFT

RODCRAFT RC3201 User manual

RODCRAFT

RODCRAFT RC6610 User manual

RODCRAFT

RODCRAFT WP15 User manual

RODCRAFT

RODCRAFT RC3068 User manual

RODCRAFT

RODCRAFT RC2200/10 User manual

RODCRAFT

RODCRAFT RC3060 User manual

RODCRAFT

RODCRAFT RC2530 Operator's manual

RODCRAFT

RODCRAFT RC3000 User manual

RODCRAFT

RODCRAFT RC7088 User manual

RODCRAFT

RODCRAFT Premium RC3062 User manual

RODCRAFT

RODCRAFT WP75P User manual

RODCRAFT

RODCRAFT RC3100 User manual

RODCRAFT

RODCRAFT RC3001 User manual

RODCRAFT

RODCRAFT RC6300 User manual

RODCRAFT

RODCRAFT RC8115 User manual

RODCRAFT

RODCRAFT RC3010 User manual

RODCRAFT

RODCRAFT RC6100 User manual

RODCRAFT

RODCRAFT RC6700 User manual

RODCRAFT

RODCRAFT RC8113 User manual

Popular Power Tools manuals by other brands

AEG

AEG OMNI-JS Original instructions

SIP

SIP 01533 manual

Ribimex

Ribimex PRS499 quick start guide

3M Fiber Optic Connector Crimp Tool instructions

Ryobi

Ryobi P524 Operator's manual

ROJEK

ROJEK FSN 300A manual

Kemper

Kemper 1740PRO manual

WABCO

WABCO OptiTire installation manual

EINHELL

EINHELL TE-MS 18/210 Li Original operating instructions

Orgapack

Orgapack OR-T 85 Operating and safety instructions

TOUGHCUT

TOUGHCUT Diamond 400 instruction manual

Yaros

Yaros PB-3603 user manual

Fein

Fein BSS 2.0 E Repair instructions

Baileigh Industrial

Baileigh Industrial SS-2725 Operator's manual

Milwaukee

Milwaukee 2674-20 Operator's manual

Fein

Fein BLs 1.6 parts list

Princess

Princess Electric Multi Sharpener user manual

FOREDOM

FOREDOM K.1050 Operation & maintenance manual