Robert Juliat ARAMIS 1013+ Quick start guide

1013+, 1013+ B, 1013+ BS, 1013+ M & 1013+ BSM

HMI 2500W HOT RESTRIKE FOLLOWSPOTS /

PROJECTEURS DE POURSUITE HMI 2500W

REAMORCAGE A CHAUD

V2c

VALIDATION: 02/03/11

DN30750100-D

ARAMIS+

Robert Juliat S.A.S. Route de Beaumont, F 60530 Fresnoy-en-Thelle - phone : +33 (0)3 44 26 51 89 - fax : +33 (0)3 44 26 90 79 - [email protected]

Robert Juliat U.S.A. 48 Capital Drive, Wallingford, CT 06492 - phone : (203) 294 0481 - fax : (203) 294 0482 - [email protected]

TECHNICAL FILE /

DOSSIER TECHNIQUE :

ii NOTES

iii

You have in your possession a ROBERT JULIAT HMI followspot. We would like to congratulate you

on your choice.

The performance of the followspot depends on the care you'll give to its maintenance. We advise

you to read this manual and then keep it for reference.

Do not hesitate to come up with suggestions ; it's thanks to you that our products will continue

to improve.

Thank you.

ROBERT JULIAT

Vous venez de prendre possession de votre nouveau projecteur de poursuite et nous vous

remercions de votre choix.

Le résultat que vous en obtiendrez dépendra pour beaucoup du soin que vous apporterez

à son entretien, aussi nous vous conseillons de lire ces quelques pages qui ont été écrites à

votre intention et de les conserver en cas de nécessité.

Ne manquez pas de nous faire part de vos idées ou suggestions ; c’est grâce à vous que le

produit pourra évoluer.

Merci de votre attention.

ROBERT JULIAT

iv CONTENTS

A TECHNICAL DATA

User's instructions ......................................................................................................A - 1

The identification plates ..........................................................................................A - 3

Connection for 1013+ / BS .......................................................................................A - 5

Connection for 1013+ B ...........................................................................................A - 7

Connection for 1013+ M / BSM ..............................................................................A - 9

Putting the lamp into place ..................................................................................A - 11

Admissible Lamp .....................................................................................................A - 13

Network use for 1013+ B ........................................................................................A - 15

Using the DMX lamp control unit for 1013+ B ..................................................A - 17

Connection for 1013+ B .........................................................................................A - 19

B MAINTENANCE

Condenser, mirror and spark-gap ......................................................................... B - 1

Non-functioning diagnosis for 1013+ ..................................................................B - 3

Electrical diagram - lamp housing for 1013+ / B / BS ....................................... B - 5

C SPARE PARTS LIST

Lamp housing and lens tube...................................................................................C - 1

6 way colour changer unit .......................................................................................C - 2

Lens tube inner parts for 1013+ / M.......................................................................C - 3

Lens tube inner parts for 1013+ B / BS / BSM.......................................................C - 4

"Black-out" iris cassette.............................................................................................C - 5

Lamp housing, socket holder and lamp...............................................................C - 6

Aspheric lens and mirror holder detail..................................................................C - 7

Zoom handle, gobo and gobo changer & soft glass holder ............................C - 8

Section:

Section A - 1

TECHNICAL FILE

2500W HMI FOLLOWSPOT

1013+/

B, BS, M & BSM

Robert Juliat reserve the right to change or alter any of the items detailed on this page, to increase or improve manufacturing techniques without prior notice.

robert juliat Route de Beaumont F 60530 Fresnoy-en-Thelle phone: +33 (0)3.44.26.51.89 - fax: +33 (0)3.44.26.90.79 - www.robertjuliat.fr

USER’S INSTRUCTIONS

GENERAL INSTRUCTIONS

1. Not for residential use.

2. Onlyqualiedtechniciansare permittedtoservicethesextures.

3. In addition to the instructions indicated on this page, you must

adhere to the relevant health and safety requirements of the

appropriate EU Directives.

4. This xture is in compliance with section 17: Lighting appliance

for theatre stages, television, cinema and photograph studios.

Standards NF EN 60598-1 and NF EN 60598-2-17.

5. This xture is rated as IP20, and is for indoor use only.

FIXTURE

6. Warning: high voltage ignition. Disconnect from the mains before

any servicing.

7. Make sure the xture is correctly mounted on an appropriate

support.

8. The protection screens, lenses or U.V. lters must be replaced if there

is any visual damage which might reduce their performance, for

example, by cracks or deep scratches.

9. Whenhungorownthexturemustbesecuredbyanotherhanging

accessory (such as a safety cable or bond) that is of suitable length.

10. The safety bond or cable must be securely attached at the back of

the xture. It must be as short as possible or rolled up as necessary

to ensure the xture does not travel any distance should it be

dislodged.

11. Movable accessories (barn doors, HMI shutters, spill rings etc.) must

also be secured with a suitable safety cable or bond at the front of

the xture.

12. Take into account the weight of both the xture and the accessories

when choosingthe strength ofthe attachment pointand the safety

cable or bond.

13. Do not open the lighting xture when the lamp is on.

14. Both thelamp andlamp housing heatup whenpowered. Wait until

the xture is cold before servicing.

15. Do not tamper with the design of the xture nor any of its safety

features.

16. Tighten the electrical mains cable connections regularly. Replace

mains cable with an identical one if damaged.

17. Use only with correct power supply.

Ventilation

18. Keep well away from ammable material.

19. Do not use outside. Do not cover. Do not permit the xture to get

wet.

20. To avoid overheating, do not obstruct air vents.

21. If the xture has fans, make sure they are working correctly. If fans

are not working, turn the xture o immediately and service as

necessary.

Lamp

22. Use only fully enclosed in the xture.

23. Never look at the lamp directly.

24. Warning : U.V. rays : Protect your eyes.

25. Check thatthe lamp voltage correspondsto the mainsvoltage used.

Do not usea lamp withpower that isan incorrect typeor voltageto

the one that is indicated on the lamp housing or packaging.

26. The lamp must be replaced if it has been damaged or deformed by

the heat.

27. Use only when bulb is in place.

Cleaning

28. Do not touch the lamp or the mirror with your ngers.

29. Keep optical parts (lens, lamps,…) clean with alcohol.

30. Regularly remove dust from the mirror with a soft and clean rag.

31. If the xture has lters they must be cleaned frequently.

POWER SUPPLY

32. Disconnect from the mains before any servicing.

33. Mains connection only. Do not connect to an "electronic output"

(dimmer, static relay...).

34. Do not use outside. Do not cover.

35. The power supply has circuit breakers, which should always be kept

accessible.

36. There is no maximum distance between the lighting unit and the

power supply.

37. Check the mains voltage.

PLEASE NOTE

These products have been built to conform to European standards

relating to professional lighting equipment. Any modication made to

our products will void the manufacturers' warranty

Please read carefully all the instructions before operating the appliance.

Danger

The discharge lamp used emits short-wave ultraviolet

radiation which is harmful to skin and eyes.

Section A - 3

TECHNICAL FILE

2500W HMI FOLLOWSPOT

1013+/

B, BS, M & BSM

Robert Juliat reserve the right to change or alter any of the items detailed on this page, to increase or improve manufacturing techniques without prior notice.

robert juliat Route de Beaumont F 60530 Fresnoy-en-Thelle phone: +33 (0)3.44.26.51.89 - fax: +33 (0)3.44.26.90.79 - www.robertjuliat.fr

- The identication plate situated on the 2500W HMI followspot.

THE IDENTIFICATION PLATES.

Units :

- Dimensions = metre (m) millimetre (mm). - Frequency = Hertz (Hz).

- Weight = kilogram (kg). - Power = Watt (W).

- Intensity = Ampere (A) milliampere (mA). - Temperature = Degree Celsius (°C).

- Voltage = Volt (V).

1 User's instructions, read the previous page

attentively.

2 The brand mark, manufacturer's name and

origin of the product.

3 Control N° : Year & WeeK.

4 European conformity.

5 Net weight without accessories.

6 - Lighting unit's reference & technical characteristics.

- PSU = The type of power supply unit necessary.

- P = Maximum power authorised.

- AL= Max. lamp intensity.

- UL= Max. voltage at the lamp terminal.

- IP 20 = indoor use ONLY.

- t a = surrounding temperature.

- t max = External maximum temperature

of the unit.

7 Restrictive position use : front view.

8 Minimum distance between a flammable

material and the lighting unit.

9 Types of admissible lamps.

10 Type of lamp base accepted.

11 Serial number.

12 WEEE directive label.

13 Read manual.

10 31211

Section A - 5

TECHNICAL FILE

2500W HMI FOLLOWSPOT

1013+/

B, BS, M & BSM

Robert Juliat reserve the right to change or alter any of the items detailed on this page, to increase or improve manufacturing techniques without prior notice.

robert juliat Route de Beaumont F 60530 Fresnoy-en-Thelle phone: +33 (0)3.44.26.51.89 - fax: +33 (0)3.44.26.90.79 - www.robertjuliat.fr

CONNECTIONS.

Power supply unit

(P.S.U.)

1234

1013+/ BS

A 1013+ / BS - Manual shutter version.

d- EM HARTING 16 x 16A power socket.

B Power supply unit.

C Lamp cable.

Cable H07 RN-F 18G 1,5 mm2length 3m fitted

with 16 x 16A M/F HARTING connectors.

Lighting unit / Power supply connection.

- Connect the lamp cable C to the connector 5 of the

ballast and connector d to the lighting unit.

- Lock the cable C into the cable lock e .

- Place the lamp into position - refer to section A - 11.

- Engage the circuit breaker 3 and check that the protection

4 is well engaged.

- Plug the cable 7 to the mains. If the power is present, the

checklight 1 lights up immediately.

- Engage the circuit breaker 2 .

WARNING !

- Never open the lamp house's bonnet when the lighting unit is on.

- Do not change the safety switches.

- Never connect to a dimmable channel.

- Use only when lamp in place.

Rating plate 6 : Lamp power.

DESCRIPTION.

Mains voltage.

- Check the conformity of the mains voltage input with the values indicated

on the identification plate of the PSU (mains voltage & lamp power)

• Use only the listed cables to connect to the mains -

Refer to the respective PSU technical le.

Section A - 7

TECHNICAL FILE

2500W HMI FOLLOWSPOT

1013+/

B, BS, M & BSM

Robert Juliat reserve the right to change or alter any of the items detailed on this page, to increase or improve manufacturing techniques without prior notice.

robert juliat Route de Beaumont F 60530 Fresnoy-en-Thelle phone: +33 (0)3.44.26.51.89 - fax: +33 (0)3.44.26.90.79 - www.robertjuliat.fr

CONNECTIONS.

Power supply unit

(P.S.U.)

Rating plate 6 : Lamp power.

Lighting unit / Power supply connection.

- Connect the lamp cable C to the connector 5 of the

ballast and connector e to the lighting unit.

- Lock the cable C into the cable lock j .

- Place the lamp into position - refer to section A - 10.

- Engage the circuit breaker 3 and check that the protection

4 is well engaged.

- Plug the cable 7 to the mains. If the power is present, the

checklight 1 lights up immediately.

- Engage the circuit breaker 2 .

WARNING !

- Never open the lamp house's bonnet when the lighting unit is on.

- Do not change the safety switches.

- Never connect to a dimmable channel.

- Use only when lamp in place.

134

1013+B

Mains voltage.

- Check the conformity of the mains voltage input with the values indicated

on the identification plate of the PSU (mains voltage & lamp power)

A 1013+ B - Motorised shutter version.

e- EM HARTING 16 x 16A power socket.

f - EM XLR 4 output 0/+10V. (extra)

g- EM XLR 5 input DATA.

h- EF XLR 5 output DATA.

i- Fuse (10,3 x 38 - 2A.).

B Power supply unit.

C Lamp cable.

Cable H07 RN-F 18G 1,5 mm2length 3m fitted

with 16 x 16A M/F HARTING connectors.

D Analogue fader control (0/+10V).

DESCRIPTION.

• Use only the listed cables to connect to the mains -

Refer to the respective PSU technical le.

Section A - 9

TECHNICAL FILE

2500W HMI FOLLOWSPOT

1013+/

B, BS, M & BSM

Robert Juliat reserve the right to change or alter any of the items detailed on this page, to increase or improve manufacturing techniques without prior notice.

robert juliat Route de Beaumont F 60530 Fresnoy-en-Thelle phone: +33 (0)3.44.26.51.89 - fax: +33 (0)3.44.26.90.79 - www.robertjuliat.fr

A 1013+ M / (*)BSM - Motorised shutter version.

e- EM HARTING 6 x 35A. power socket.

*f - EM XLR 4 output 0/+10V. (extra)

*g- EM XLR 5 input DATA.

*h- EF XLR 5 output DATA.

*i- Fuse (10,3 x 38 - 2A.).

B Lamp cable.

Cable H07 RN-F 18G 1,5 mm2length 3m fitted

with 16 x 16A M/F HARTING connectors.

C Electronique power supply.

D Analogue fader control (0/+10V).

DESCRIPTION.

CONNECTIONS.

Electronic

power supply unit.

Lighting unit / Power supply connection.

- Connect the lighting unit's power cable B by passing it

inside the yoke.

- Leave a little slack and then block the cable B into the lock j .

- Place the lamp into position - refer to section A - 11.

- Connect the cable O to the mains.

WARNING !

- Never open the lamp house's bonnet when the lighting unit is on.

- Do not change the safety switches.

- Never connect to a dimmable channel.

- Use only when lamp in place.

1013+M / BSM

Mains voltage.

- Check the conformity of the mains voltage input with the values indicated

on the identification plate of the PSU (mains voltage & lamp power)

• Use only the listed cables to connect to the mains -

Refer to the respective PSU technical le.

Section A - 11

TECHNICAL FILE

2500W HMI FOLLOWSPOT

1013+/

B, BS, M & BSM

Robert Juliat reserve the right to change or alter any of the items detailed on this page, to increase or improve manufacturing techniques without prior notice.

robert juliat Route de Beaumont F 60530 Fresnoy-en-Thelle phone: +33 (0)3.44.26.51.89 - fax: +33 (0)3.44.26.90.79 - www.robertjuliat.fr

150

1 1

210

PUTTING THE LAMP INTO PLACE.

User's instructions :

- Make sure the voltage is turned off.

- Lamp is cold.

- Avoid touching the bulb of the lamp.

MOUNTING THE HEATSINK ONTO THE BASES :

- Make sure that the guard rings a are well

placed on the neck of the heatsinks 1 .

PREPARATION OF THE JAW SOCKET :

- Raise the deflector plate.

- Unscrew the nuts 4 and raise the jaws 2 to the top of the shunks 5 .

- Turn the jaws 2 socket 90° to the exterior and place them onto the corner plates 3 .

POSITIONING THE LAMP :

- Position the lamp into place.

- Check that the heatsinks 1 are placed to the exterior of the isolating plates 7 .

- Place the jaws 2 onto the neck of the heatsinks.

- Make sure the necks of the heatsinks are placed well in the top and bottom jaws,

check by moving the mobile jaw 6 with the help of the lever 10 .

- Place the slots of the heatsinks horizontally 11 .

- Place the closing point of the lamp 9 upwards.

- Tighten the 2 nuts 4 with a 6 sided bolt-driver N° 13 8 and make sure you stay in axe 12 .

OVERHEAD VIEW

SIDE VIEW

FRONT VIEW SIDE VIEW

Base : SFa 21 - 12

SIDE VIEW

Other manuals for ARAMIS 1013+

This manual suits for next models

Table of contents

Other Robert Juliat Spotlight manuals

Robert Juliat

Robert Juliat SULLY 650SX 4C User manual

Robert Juliat

Robert Juliat ZEP 660 SX User manual

Robert Juliat

Robert Juliat TIBO 503 User manual

Robert Juliat

Robert Juliat TIBO 533 CW User manual

Robert Juliat

Robert Juliat SULLY 650SX 4C User manual

Robert Juliat

Robert Juliat SULLI 305LF User manual

Robert Juliat

Robert Juliat OZ 1169 User manual

Robert Juliat

Robert Juliat SULLY 1156 User manual

Robert Juliat

Robert Juliat TIBO HE User manual

Robert Juliat

Robert Juliat OZ Series User manual

Robert Juliat

Robert Juliat TIBO HE 553 CW User manual

Robert Juliat

Robert Juliat ARTHUR 1014 User manual

Robert Juliat

Robert Juliat RJ NET SUPER KORRIGAN User manual

Robert Juliat

Robert Juliat ARTHUR User manual

Robert Juliat

Robert Juliat 1010 User manual

Robert Juliat

Robert Juliat Lancelot 4000W HTI User manual

Robert Juliat

Robert Juliat TIBO HE User manual

Robert Juliat

Robert Juliat SULLY 650SX Series User manual

Popular Spotlight manuals by other brands

Guangzhou Yinhe Lighting&Sound Equipment Factory

Guangzhou Yinhe Lighting&Sound Equipment Factory NE-204 user manual

LIVARNO home

LIVARNO home 375304 2101 Installation, operating and safety information

Cameo

Cameo CLQS40WW user manual

Leviton

Leviton Ellipsoid 5/50 user guide

Monacor

Monacor img Stage Line PARL-56PDX/CR instruction manual

Vector

Vector SL3AKV instruction manual

Quantum

Quantum Q262 Product data sheet

Philips

Philips Vari-lite VL3015LT user manual

EUROSPOT

EUROSPOT C51 instruction manual

DTS

DTS MINI BRICK ARC user manual

Federal Signal Corporation

Federal Signal Corporation VISIBEAM II Installation, operation and maintenance instructions

ACME

ACME LED-MS350B user manual

EuroLite

EuroLite Akku flat light 1 user manual

Commercial Electric

Commercial Electric SPTM-1401 Use and care guide

Vision & Control

Vision & Control SLB-500-W5K7-P-SL Instructions for use

Teknik

Teknik FLEXI user manual

Craftsman

Craftsman CMXLSB10 instruction manual

EuroLite

EuroLite LED SLS-144 UV Floor Spot user manual