RMT PAL User manual
OWNERS MANUAL
RehaMed Aquatics
The New Standard in Aquatic Lifts!
PAL / PAL Hi-Lo
Product Overview………………………………………………… 4
A. Product Components
– Standard to All Products……………………………………… 5
–PAL Base Assembly………………………………………….. 6
B. Unpacking & Assembly Instructions- PAL………………………. 7-9
Splash! / Splash! Hi-Lo / Splash! HD / Splash! Mariner
Product Overview………………………………………………… 10
C. Product Components
– Standard to All Products……………………………………… 11
– Splash! Base Assembly……………………………………. 12
D. Unpacking & Assembly Instructions- Splash!……………………. 13-14
– Pool Deck Installation………………………………………… 15
GENERAL - ALL PRODUCTS
E. Battery Charging………………………………………………… 16
F. Remote Control Operation……………………………………… 16
G. Transferring……………………………………………………… 17-18
H. Maintenance……………………………………………………… 18
I. Trouble Shooting………………………………………………… 19
J. Warranty………………………………………………………… 19
K. Product Specifications
– Dimensions/Capacity………………………………………… 20
– Actuator……………………………………………………… 20
– Motor………………………………………………………… 20
– Battery………………………………………………………. 20
– Materials and Finish………………………………………… 21
– Range of Motion……………………………………………… 21
L. Standard/Optional Accessories…………………………………….. 22
M. Parts List………………………………………………………….. 23
TABLE OF CONTENTS
2
The purpose of this document is to provide information relating to the
operation, care, and maintenance of RehaMed International’s line of Aquatic
Lifting Products.
Our goal is to provide our customers with the most advanced and innovative
designs that offer exceptional quality at affordable prices. We design and
manufacture our products so that all individuals with disabilities and mobility
impairments can have access to, and enjoyment from the recreation activity of
their choice. Please feel free to contact us directly if you have any questions
about our current product line or have needs that we may be able to assist you
in meeting in the future.
RehaMed International, LLC.
14008 SW 140th Street • Miami, FL 33186
800-577-4424 Toll Free
305-255-1400 Phone
305-969-2155 Fax
http://www.poollifts.com
INTRODUCTION
CONTACT INFORMATION
3
PAL- Product Overview
The PAL-Portable Aquatic Lift is designed to provide the greatest flexibility
for swimming facilities seeking to provide access to more than one pool or
spa, or to accommodate a user’s desire to enter a single pool in multiple
locations. The PAL is completely portable, is battery powered, and is
operated by a screw driven actuator. This design insures consistent operation
and elimination of service problems that occur with water powered pool lifts.
The PAL is available in a Hi-Lo version to accommodate facilities with both
in-ground pools and above-ground spas.
The PAL can be adapted to virtually any pool configuration. A poolside
configuration worksheet is requested with each order prior to shipping so
the lift is configured to match customer’s specifications. If you have
questions regarding the PAL’s adaptability to pool’s configurations,
please contact either your vendor or RehaMed directly.
THE PAL-PORTABLE AQUATIC LIFT
4
5
All PAL and Splash! Products – Standard Components in all Units
Control Box. Forms the bottom of the control console; this unit controls
the mechanical operations of the lift. Three wire leads connect to the rear
of the Control Box. The largest receptacle is the connection for the Hand
Control. The connector next to the hand control connector, marked num-
ber 1, is the receptacle for the Actuator lead. The connector
next to the actuator connector, marked number 2, is the
receptacle for the 24-volt motor lead.
Battery. The removable Battery is located on top of the
control box. The battery should be charged frequently. Do
not allow to fully discharge.
Hand Control. Initiates the actions of the lift. The two top
pairs of buttons control the lifting actions of the unit. The
user can select “fast up/fast down” or “slow up/slow
down” based on their individual comfort level. The bottom
pair of buttons controls the side to side movement of the
lift. The right button turns the main mast to the right, and
the left button turns the main mast to the left.
Mast. This vertical piece is bolted to the base assembly.
Actuator. Attached to the top of the mast, this part powers the up and
down movements of the lift.
Horizontal Support Arms. These two support arms connect the mast to
the chair support arm. The longer horizontal support arm (actuator arm)
connects to the actuator and initiates the lifting movements.
Chair Support Arm. Connects the chair to the horizontal support arms.
Chair Assembly. Connects to the Chair Support Arm.
A– PRODUCT COMPONENTS
REFER TO THE DIAGRAM ON PG.7 FOR COMPONENT IDENTIFICATION.
6
PAL/PALHi-Lo - Base Assembly Only
The Base Assembly is made up of several components as described below:
Casters. These are the wheels on which the PAL moves. The front
wheels are rigid and the back wheels are swivel and locking casters to
facilitate movement of unit.
Main Frame. This is the rectangular piece that is fixed to the casters. The
main frame is made up of several components:
Rotation Motor Assembly. Consists of mounting plate, 24-volt motor,
and small gear.
Hub Assembly. Consists of hub, bearings, shaft, large gear and mast
mounting plate.
Stabilizing Arms. These arms pull out to level the unit and should always
be engaged when the unit is in use.
Counter Weights. These 17 plates weigh approximately 40 pounds each and
are housed in the counter weight receptacle of the main frame. The weights
should be placed horizontally into the receptacle to facilitate handling.
Housing. ABS Plastic covering to cover main frame components from
weather. Needs to be in place prior to installing the mast assembly.
Handle. Connects to the Main Frame through openings in the housing.
7
Mast
Mast
Assembly
Actuator
SECTION DETAIL
Actuator Assembly
Shaft
Hand Control
Handle
Housing
Weight Plates
Main Frame
Swivel Caster
& Brake
Battery Control
Box
Tie wrap
holder
Actuator
cable
Bolt
24 volt
motor cable
Mast Mounting Plate
Base Assembly
Fixed Caster
Seat Belt Strap
Chair Assembly
Bolt
Support Arm
Actuator Arm
Chair Support Arm
SIDE VIEW
Bolt
Washer
Act. Arm
Spacer
Acturator
Lock Nut
Component Identification
PAL-Portable Aquatic Lifting Systems
B. UNPACKING & ASSEMBLY INSTRUCTIONS
REFER TO THE DIAGRAM (above) FOR PARTS IDENTIFICATION.
READ THESE INSTRUCTIONS IN THEIR ENTIRETY BEFORE
UNCRATING PAL.
Prior to opening the pallet, inspect the external condition for any visible
damage. It is important that any damage be noted on the Bill of Lading.
Contact RehaMed or dealer immediately to notify of missing or damaged
parts.
The PAL is shipped on a cardboard covered pallet. This pallet is VERY
HEAVY. You will need to gather the following tools to begin the unpacking
and assembly of your unit:
• a Phillips head screwdriver or powered drill to remove the cardboard
• a 3/4” socket wrench
• a small flat blade screwdriver
• a knife or cutters to cut the shrink-wrap and bands.
8
IMPORTANT NOTE:
Two people will be needed for completion of step 11.
1. Cut bands and remove long box containing mast from side of cardboard
enclosure.
2. Remove the cardboard enclosure by removing the screws at the bottom and
lifting off the enclosure.
3. Cut bands and remove chair assembly and housing.
4. Remove and unwrap the handle located under the frame.
5. Remove the main frame from the pallet. Position the main frame close to
the pallet and lock the wheels.
6. Carefully transfer the remaining plates (15) from the pallet into the plate
enclosure on the main frame. Each plate weighs approximately 40 pounds
so be careful not to pinch fingers or drop when placing into plate enclosure.
Be sure that the plates lie flat on top of each other. If any plate appears to
rock, remove that plate, flip it over, and replace it into the enclosure.
7. Open box containing mast, remove and unwrap mast assembly. Leave mast
assembly in fully contracted position, this will make handling easier.
8. On frame, cut tie wrap securing 24v motor cable, position cable on top of
counterweights.
9. Remove 2 bolts and lock washers from base assembly.
10. Place housing on frame.
11. Position mast assembly thru housing and attach to mast mounting plate on
base assembly with bolts and lock washers. Fully tighten with 3/4” socket
wrench. This step requires one person to hold the mast assembly while a
second person secures the bolts. Wiggle the mast to make sure the
connection is secure.
12. Cut the bands around mast (WARNING! arms will drop so be careful they
are adequately supported before cutting bands).
13. Extend arm assembly and rest chair support arm on ground; use cardboard
or similar material under chair support arm to prevent scratching.
14. Cut tie wrap and uncoil actuator cable at bottom of mast.
15. Lift and slide the housing part way up the mast to gain access to frame area
under housing.
16. Run actuator cable along with the 24v motor cable across the top of the
weights and insert through the hole in the rear of the housing near the
control box.
9
17. Insert actuator cable (with the “o” ring) into receptacle #1 on the control
box.
18. Insert 24v motor cable into receptacle #2 on control box.
19. Return housing to normal position.
20. Insert handle into slots.
21. Attach actuator to actuator arm using hardware (2 3/4” bolt, nut and 2
plastic spacers) connected to actuator. Place plastic spacers on either side of
actuator on inside of actuator arm. See section detail in diagram page 7.
22. Remove and unwrap hand control from accessory carton. Insert connector
into large receptacle on control unit and hang hand control on handle.
23. Attach battery to control unit mounted on housing.
24. Lock wheels to prevent movement.
25. Raise lift to its highest position.
26. Check the side to side controls for proper operation.
27. Return lift to deck side and move lift away from pool.
28. Attach chair assembly with lock pin into the appropriate hole. To facilitate
storage, chair can be attached facing inward, which will require less space.
Please call RehaMed International at
800-577-4424 if you have any problems
or questions with assembly.
10
SPLASH!- Product Overview
The Splash!-aquatic lifting system is a semi-portable lift system designed for
swimming facilities seeking to provide universal access to their pools. The
Splash! is battery powered and is operated by a screw driven actuator. This
design insures consistent operation and elimination of service problems that
occur with water powered pool lifts. The Splash! is available in a Hi-Lo
version to accommodate facilities with both in-ground pools and above-
ground spas; and a Heavy Duty (HD) model to accommodate up to 375 lbs.
The Splash! Mariner provides access to watercraft and can be mounted to a
floating boat dock. The Splash! Mariner utilizes a sling seat to place the user
onto a boat seat, eliminating the need for transfers. To facilitate moving unit,
an optional caddie can be purchased. The Caddie is designed to lift unit out
from anchor socket and roll to storage or another location if desired. Caddie
also serves as a convenient storage rack for the lift when not in use.
THE SPLASH! –
SEMI-PORTABLE AQUATIC LIFT SYSTEMS
This manual suits for next models
5
Table of contents
