RIOTEC LS6307L User manual

Programming Quick Guide

-LS6307L/ LS6327L.

Installation

Make sure that the scanner has the correct cable to plug in the PC as below

described: *Note : Please install PL-2303 driver for USB serial

Auto-sensing setup (For LS6327L Only)

The auto-sensing will active

while scanner position on stand.

When scanner remove from

stand will become trigger mode.

Reset Configuration to Defaults

If you are unsure of the scanner configuration or have scanned the

incorrect codes, please scan from A1 to A3 for USB HID or B1 to B5 for

RS232 or USB Serial. This will reset the scanner to its factory defaults.

Barcode Configuration Method:

(Flow chart for setup procedure :)

Start

Configuration

End

Configuration

Keyboard Country (For USB HID only)

Scan the appropriate country code as below to program the keyboard

layout for your country or language. As a general rule, the following

characters are supported, but need special care for countries other

than the United States: @ | $ # { } [ ] = / ‘ \ < > ~

USA

Japan

Denmark

Finland

France

Italy

Norway

Turkey F

Turkey Q

Keyboard Country (For USB HID only)

Scan the appropriate country code as below to program the keyboard

layout for your country or language. As a general rule, the following

characters are supported, but need special care for countries other

than the United States: @ | $ # { } [ ] = / ‘ \ < > ~

Belgium

Spain

Germany

Austria

Russia

Sweden

Portugal

1D Symbologies – 1

ENABLE

EAN-8

DISABLE

ENABLE

EAN-13

DISABLE

ENABLE

ISSN

DISABLE

ENABLE

ISBN

DISABLE

ENABLE

Codabar

DISABLE

Barcode Configuration Method:

(Flow chart for setup procedure :)

Start

Configuration

End

Configuration

1D Symbologies – 2

ENABLE

Matrix

2 of 5

DISABLE

ENABLE

Industrial 25

DISABLE

ENABLE

Code 39

DISABLE

ENABLE

Code 93

DISABLE

1D Symbologies – 3

ENABLE

GS1-Databar

(RSS)

DISABLE

ENABLE

UPC-E

DISABLE

ENABLE

UPC-A

DISABLE

ENABLE

Interleaved

2 of 5

DISABLE

ENABLE

Code 128

DISABLE

ENABLE GS1-128

UCC/EAN-128

DISABLE

ENABLE

CODE 11

DISABLE

ENABLE

MSI

DISABLE

2D Symbologies

ENABLE

Data

Matrix

DISABLE

ENABLE

QR Code

DISABLE

ENABLE

Micro

QR Code

DISABLE

ENABLE

PDF 417

DISABLE

Inter-Keystroke Delay (For USB HID Only)

This parameter specifies the delay between emulated keystrokes.

No Delay

Short Delay

(20ms)

Long Delay

(40ms)



Information in this document is subject to change without notice.

For more information, please visit:

www.riotec.com.tw

R_170608_01

This manual suits for next models

Popular Barcode Reader manuals by other brands

POSMicro

POSMicro Datalogic PowerScan D7100 manual

Marson

Marson MT780 Integration guide

NCR

NCR RealPOS user guide

Motorola

Motorola SE3300 Integration guide

Element

Element P130BT user manual

Motorola

Motorola Symbol LS3008 Product reference guide

Meec tools

Meec tools OBD-II / VAG operating instructions

SICK

SICK CLP 100 operating instructions

Royal Tag SA

Royal Tag SA I-Read user manual

Welch Allyn

Welch Allyn IMAGETEAM 3800 user guide

Meteor

Meteor 8310 user manual

Denso

Denso BHT-500B user manual

Datalogic

Datalogic Heron HD3130 Quick reference guide

Motorola

Motorola MP6000 Integrator guide

Newland

Newland NLS-HR15-BT user guide

ARTDEV

ARTDEV AS-1310 quick guide

Aopos

Aopos AS290 user manual

ENS

ENS 367-5455 installation instructions