RIOTEC CR6327A User manual

Programming Quick Guide

-CR6327A. / FS5027A

Installation

Make sure that the scanner has the correct cable to plug in the PC as

below described:

*Note : Please install PL-2303 driver for USB serial

Auto-sensing setup

The auto-sensing will be activated while

scanner puts on stand. When scanner is

removed from stand, it becomes trigger

mode.

Reset Configuration to Defaults

If you are unsure of the scanner configuration or have scanned the incorrect

codes, please scan from A1 to A6 for USB HID or B1 to B6 for RS232 or USB

Serial. This will reset the scanner to its factory defaults.

USB HID RS232 or USB Serial

A1 B1

A2 B2

A3 B3

A4 B4

A5 B5

A6 B6

*Note: Please install PL-2303 driver for USB Serial.

Barcode Configuration Method:

(Flow chart for setup procedure :)

Start

Configuration End

Configuration

Keyboard Country ( FOR USB HID Only)

Scan the appropriate country code below to program the keyboard for your

country or language. As a general rule, the following characters are not

supported by the scanner for countries other than the United States:

@ | $ # { } [ ] = / ‘ \ < > ~

USA

(Original setting) Japan

Denmark

Finland

France

Germany

Italy Norway

1D Symbologies On/Off – 1

ENABLE

CODE 39 DISABLE

ENABLE CODE 39 Transmit

Start/Stop Character DISABLE

ENABLE CODE 39

FULL ASCII

DISABLE

ENABLE

CODE 128

DISABLE

ENABLE GS1-128

UCC/EAN-128

DISABLE

1

Barcode Configuration Method:

(Flow chart for setup procedure :)

Start

Configuration End

Configuration

1D Symbologies On/Off – 2

ENABLE

Plessy DISABLE

ENABLE MSI-

Plessey DISABLE

ENABLE

UPC-E DISABLE

ENABLE

UPC-A DISABLE

1D Symbologies On/Off – 3

ENABLE

EAN-8

DISABLE

ENABLE

EAN-13

DISABLE

ENABLE Interleaved

25 DISABLE

ENABLE Matrix

25 DISABLE

ENABLE

Industrial 25 DISABLE

ENABLE

CODE 93 DISABLE

ENABLE

CODE 11 DISABLE

ENABLE

ISSN DISABLE

ENABLE

ISBN DISABLE

1D Symbologies On/Off – 4

ENABLE

CODABAR DISABLE

ENABLE GS1-Databar

(RSS) DISABLE

ENABLE GS1-Databar

(RSS-Limited) DISABLE

ENABLE GS1-Databar

(RSS-Expand) DISABLE

Inter-Keystroke Delay( FOR USB HID Only)

This parameter specifies the delay between emulated keystrokes

No Delay Short Delay

(5ms)

Medium Delay

(10ms) Long Delay

(15ms)

Information in this document is subject to change without notice.

For more information, please visit:

www.riotec.com.tw R_140630_02

2

This manual suits for next models

Popular Barcode Reader manuals by other brands

POSMicro

POSMicro Datalogic PowerScan D7100 manual

Marson

Marson MT780 Integration guide

NCR

NCR RealPOS user guide

Motorola

Motorola SE3300 Integration guide

Element

Element P130BT user manual

Motorola

Motorola Symbol LS3008 Product reference guide

Meec tools

Meec tools OBD-II / VAG operating instructions

SICK

SICK CLP 100 operating instructions

Royal Tag SA

Royal Tag SA I-Read user manual

Welch Allyn

Welch Allyn IMAGETEAM 3800 user guide

Meteor

Meteor 8310 user manual

Denso

Denso BHT-500B user manual

Datalogic

Datalogic Heron HD3130 Quick reference guide

Motorola

Motorola MP6000 Integrator guide

Newland

Newland NLS-HR15-BT user guide

ARTDEV

ARTDEV AS-1310 quick guide

Aopos

Aopos AS290 user manual

ENS

ENS 367-5455 installation instructions