rioECO HCJ100T User manual
INSTRUCTION MANUAL
rioECO Ceramic Core Energy Efficient Smart
Electric Radiator
PLEASE READ AND SAVE THESE INSTRUCTIONS
SYMBOLS USED IN THIS MANUAL:
Warning
This symbol indicates a hazard which could result in serious injury or death if not avoided.
Warning of electric shock hazard
This symbol indicates danger to the life and health of persons due to electric voltage.
Do Not Cover
This symbol indicates that nothing (e.g. clothes, towels, curtains etc) should be place directly
on, above, in front of or below the device, due to risk of overheating and fire hazards.
Hot surface
This symbol indicates that the radiator’s surfaces are hot during and immediately after
operation. Do not touch the surface when in use or cooling down due to danger of burns.
Observe instructions
This symbol indicates that the operating manual instructions must be read and observed when
installing and using the radiator.
CONTENTS
1. Warnings & Precautions
2. Technical Specifications
3. Installation
4. Operating Instructions
- Power Switch
- LCD Display
- Modes
- Settings
- Child lock
- Reset to defaults
- Standby mode
5. Connecting to WiFi
- Downloading the App
- Connecting to the App
- Troubleshooting
6. Using the App
- Home overview
- Control interface
- Choose mode
- Setting the programme
- Device settings
7. Maintenance
8. Information Requirements for electric space heaters
9. Disposal
1. WARNINGS AND PRECAUTIONS
Please read these instructions carefully before using or installing the radiator. Failure to
follow the warnings or instructions could result in electric shock, fire, serious injury or all of
the above. Always store the instruction manual in the immediate vicinity of the radiator or
its site of use.
Warning
• This appliance must only be operated by adults. Children should always be supervised
when in the vicinity of the radiator.
• To avoid overheating, do not cover the radiator.
• Ensure the appliance is fitted according to the installation instructions, obeying the
minimum safety distances from walls and objects.
• Some parts of this product can become very hot with use and cause burns. Do not touch
the surface when in use. Particular attention must be paid where children and vulnerable
adults are present.
• The appliance is for indoor use only. It must be kept a minimum distance of one metre from
flammable objects and materials e.g. curtains.
• Do not use this appliance with a programmer, timer, separate remote control or any
device that automatically switches the heater on, due to risk of fire or damage.
• Do not use the appliance if you detect any damage to the mains plug or power cable. In
the event of damage to the supply cord, it must be replaced by the manufacturer, a
service agent or a similarly qualified person only.
• The appliance must be installed in a fixed, upright position in accordance with national
installation rules. Ensure the power cable is kept away from all hot parts of the appliance.
• All repairs and servicing must be carried out by a qualified professional. Repairs must be
completed by the manufacturer, a service agent or a similarly qualified person.
• Do not locate the appliance immediately below an electrical socket outlet.
• The heater must not be used in the immediate surrounds of a bath, shower, swimming pool,
or any other water container, due to risk of electric shock. The device must not be used with
wet or damp hands.
• This device is not weight-bearing. Do not sit on it. Never insert fingers or any other object
into the device due to risk of injury or electric shock.
2. TECHNICAL SPECIFICATIONS
Heating Element
Ceramic core
Power
230V~ / 50 Hz
Wattage
1000W, 1500W, 2000W
Temperature Setting
- Range
- Minimum temperature setting value
7 – 30 °C
0.5 °C
Appliance Class
Class II
3. INSTALLATION
Before installing the radiator, please ensure that all fixings are supplied, as per diagram below. Only
fixings provided by the manufacturer should be used to mount the device to the wall.
CAUTION: Appliance must be correctly and securely fixed to the wall before being switched on.
1. Decide where to mount the radiator on the wall, ensuring that it is positioned in accordance with
the required minimum distances from surrounding walls, ceilings or fixed objects shown in the
diagram below. I.e. at least 10cm from the floor, 20cm from the top, 20cm from the sides and with
at least 60cm space in front. Failure to adhere to these distances could cause the device to overheat
or result in damage to surrounding objects and surfaces.
2. Place the template against the wall and mark the locations of the 5 drill holes required for your
product size. Before drilling, ensure there are no pipes, electric cables or other hazards. Once drilled,
fit the wall plugs into the 5 holes and fix the brackets in place with the wall mounting screws, as
shown in the diagram below.
3. Now it is time to mount the unit into place. Carefully lift the appliance and slide the struts of the
upper brackets into the grooves, then lower the appliance so it locks into the lower bracket on the
wall.
4. Now feed the locking screws into the upper brackets, to secure the unit in place, as pictured below:
4. OPERATING INTRUCTIONS
1. Power Switch
Before first use, the radiator must be switched on at the mechanical switch at the back of the
unit. This switch must be kept in the ON position for the radiator to remember its set times
and programmes.
2. Display
The appliance features a lockable touchscreen control panel with backlit LCD display. The
backlight will appear when the panel is in use and will switch off after one minute of inactivity.
Image 1
To switch between different modes, press the button. This will allow you to browse
through Comfort , Eco , Anti-Freeze , Timer , Sensor and Pilot mode.
Alternatively, you can swipe the touchscreen left or right to switch between the different
modes.
Icon
Description
Icon
Description
Time
SENSOR MODE
Day of the week
ON/OFF
Switch Mode
PILOT MODE
/
Decrease / Increase time or
temperature
Open Window Detection
COMFORT MODE
Keypad locked (Child Lock)
ECO MODE
Device is heating
ANTI-FREEZE MODE
TIMER
3. Modes
COMFORT MODE
When the icon appears on the display screen, this denotes that the radiator is in
Comfort Mode. In this mode, the radiator will heat to a constant set temperature
e.g. 19°C (default temperature). The internal thermostat measures the room
temperature and switches the radiator on and off accordingly to maintain the
desired temperature. You can adjust the set temperature using the and
buttons on the display screen.
ECO MODE
When in Eco Mode, the icon will appear. This mode operates as above, however
the default temperature is designed to be lower – at 15.5°C – to save energy. As
with Comfort Mode, you can adjust the temperature using the and buttons
on the display screen.
ANTI-FREEZE MODE
The icon will appear on the display screen when the radiator is in Anti-Freeze
Mode. Under this setting, the radiator will turn on when the room temperature
drops below 7°C to prevent pipes from freezing. Please note: this temperature
cannot be adjusted.
PILOT WIRE MODE
The radiator is in Pilot Mode when the icon appears on the display screen. This activates
external control of the device via a pilot wire (not supplied). In this mode, there are 6
externally controlled modes available: Comfort, Comfort-1, Comfort-2, Economic, Anti-
Freeze and Power Off.
Please note: This option is tailored to the French market and is not available on UK models.
T
I
M
ER
MODE
The icon will appear on the display screen when you are in Timer Mode.
In this mode, the radiator will heat according to your set daily/weekly
programming.
To set the time and programme, follow the instructions below.
Please note: when setting the time and day of the week, the control panel will
automatically jump to the next step if no adjustments are made in 30 seconds.
Setting the time:
1. Press and hold the
button for 5
seconds until the
hours icon starts to
flash.
2. Use the or to set
the hour and press to
confirm. The minutes icon
will then begin to flash.
3. As before, use the
or buttons
to set the minutes on
the timer and press
to confirm. The
‘Day of the Week’
symbol to the right of
the minutes will then
start to flash.
4. Use the and to
set the day of the week: 1
= Monday, 2 = Tuesday, 3
= Wednesday, 4 =
Thursday, 5 = Friday, 6 =
Saturday and 7 = Sunday.
Press to confirm. The
display will then move on
to the programme setting
stage.
Setting the programme:
After setting the time (see above), P1 will appear on the screen, meaning you are ready to begin
setting your daily programmes. P1 = Monday, P2 = Tuesday, P3 = Wednesday, P4 = Thursday, P5 =
Friday, P6 = Saturday, P7 = Sunday.
Each programme is made up of 24-hourly slots. You can set the radiator to heat in either Comfort
Mode or Eco Mode . The temperature the radiator will heat to will be whatever it has been set
to on either mode.
This manual suits for next models
2
Table of contents
Popular Heater manuals by other brands
oventrop
oventrop Regucor Series quick start guide
Blaze King
Blaze King CLARITY CL2118.IPI.1 Operation & installation manual
ELMEKO
ELMEKO ML 150 Installation and operating manual
BN Thermic
BN Thermic 830T instructions
KING
KING K Series Installation, operation & maintenance instructions
Empire Comfort Systems
Empire Comfort Systems RH-50-5 Installation instructions and owner's manual
Empire Heating Systems
Empire Heating Systems WCC65 Installation and owner's instructions
Wetekom
Wetekom 92 86 43 Original instructions
Desa
Desa SPC170-F owner's manual
Watlow
Watlow Watrod Electric Tubular Heaters Specifications
Haverland
Haverland ECO-DRY GPS Series Instruction & installation manual
Stelpro
Stelpro ASILVC2060 Series user guide