Rigol DM3068 User manual
FAQ
Instrument Solution – FAQ
Solution Title
Using the DM3068 Internal Webpage
Date:11.16.2011
Solution: The DM3068 has an internal webpage for verification of remote
operation via Ethernet. Here are the steps to begin operating the instr ment via the
Ethernet connection.
1. Connect the power cord to the instr ment and power on.
2. Connect an ethernet cable to the instr ment and to an operational ethernet
connection (switch, PC, ro ter, etc..)
3. Check the IP address of the DM3068
•Press Utility > T/C softkey > Info
4. Open a browser on yo r PC
5. Enter the IP Address for the instr ment in the address area and press Enter
on the comp ter keyboard.
6. The Instr ment Web Page sho ld open:
7. Press the Web Control b tton on the DM3068 Webpage. This will enable web control of
the instr ment.
NOTE: The Web Control Panel is a JAVA Applet. Yo may need to allow the JAVA Applet
permission to r n on yo r system in order to see the following screens.
8. The DM3068 Web page will open. Config re the f nction, range, and other parameters.
When yo are finished and want to collect data, press Apply as below.
Other manuals for DM3068
5
Other Rigol Multimeter manuals
Rigol
Rigol DM3068 Installation and operation manual
Rigol
Rigol DM3063 User manual
Rigol
Rigol DM3058E User manual
Rigol
Rigol DM3061 User manual
Rigol
Rigol DM3068-OB User manual
Rigol
Rigol DM3068 User manual
Rigol
Rigol DM3058 Use and care manual
Rigol
Rigol DM3068 User manual
Rigol
Rigol DM3000 Series User manual
Rigol
Rigol DM3000 Series Operating instructions
Popular Multimeter manuals by other brands
Gossen MetraWatt
Gossen MetraWatt METRAmax 6 operating instructions
PeakTech
PeakTech 4000 Procedure of calibration
YOKOGAWA
YOKOGAWA 90050B user manual
Gossen MetraWatt
Gossen MetraWatt METRALINE DMM16 operating instructions
Fluke
Fluke 8846A Programmer's manual
Tempo Communications
Tempo Communications MM200 instruction manual
