Ricoh FW750 User manual
i
SAFETYINFORMATION
When using your machine, the following safety precautions should be always be followed.
In this manual, the following important symbols are used:
R
WARNING:Ignoring this warning could cause serious injury or even death.
R
CAUTION: Ignoring this caution could cause injury or damage to property.
Symbol Rmean a situation that requires you take care.
Symbol vmean “Hot surface”.
Do NOT carry out the operation represented by this symbol m.
This example means “Do not take apart”.
Symbols lmean you MUST perform this operation.
This example means “You must remove the wall plug”.
INTRODUCTION
This copier is a console plain papercopier carefully manufactured to exacting standards of high
performance. it consistently yields high contrast copies with a superior finish.
This manual contains detailed instructions on the operation and maintenance of this copier. To get
maximum versatility from this copier, all operators should carefully read and follow the instruc-
tions in this manual. Please keep this manual in a handy place near the copier.
Please read the next section before using this copier. It contains important information related to
USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
SafetyDuringOperation
ExamplesOfIndications
R
v
q
r
ii
• Only connect the machine to the power source described on the
inside front cover of this manual.
• Avoid multi-wiring.
• Do not damage, break or make any modifications to the power
cord. Do not place heavy objects on it, pull it hard or bend it more
than necessary. These actions could cause an electric shock or
fire.
• Do not plug or unplug the power cord with your hands wet. Other-
wise, an electric shock might occur.
• Make sure the wall outlet is near the machine and freely acces-
sible so that in event of an emergency it can be unplugged easily.
• Do not remove any covers or screws other than those specified
in this manual. Some parts of the machine are at a high voltage
and could give you an electric shock. Also, if the machine has
laser systems, direct(or indirect)reflected eye contact with the
laser beam may cause serious eye damage. When the machine
needs to be checked, adjusted, or repaired, contact your service
representatives.
• Do not take apart or attempt any modifications to this machine.
There is a risk of fire, electric shock, explosion or loss of sight. If
the machine has laser systems, there is a risk of serious eye
damage.
• If the machine looks damaged or breaks down, smoke is coming
out, there is a strange smell or anything looks unusual, immedi-
ately turn off the operation and main power switches then unplug
the power cord from the wall. Do not continue using the machine
in this condition. Contact your service representative.
• If metal, liquid, or foreign matter falls into the machine, turn off the
operation and main power switches, and unplug the main power
cord. Contact your service representative. Do not keep using the
machine with a fault or defect.
• Do not put any metal objects or containers holding water(e.g.
vases, flowerpots, glasses) on the machine. If the contents fall
inside the machine, a fire or electric shock could occur.
RR
RR
R WARNING:
m
r
q
o
m
iii
• Do not incinerate used toner, toner bottles or toner cartridges.
Toner dust might ignite when exposed to an open flame. Dispose
of the used toner cartridges according to local regulations for
plastics.
s
iv
• Keep the machine away from humidity and dust. A fire or an
electric shock might occur.
• Do not place the machine on an unstable or tilted surface. If it
topples over, it could cause injury.
• After you move the machine, fix it with the caster fixture. Other-
wise, the machine might move or come down to cause a per-
sonal injury.
• When you move the machine, unplug the power cord from the
wall outlet to avoid fire or electric shock.
• When the machine will not be used for a long time, unplug the
power cord.
• When you pull out the plug from the socket, grip the plug to avoid
damaging the cord and causing fire or electric shock.
• If you use the machine in a confined space, make sure there is a
continuous air turnover.
• Do not reuse stapled paper. Do not use aluminium foil, carbon
containing paper or other conductive paper. Otherwise, a fire
might occur.
• When removing misfed paper, do not touch the fusing section
because it could be very hot.
• This machine has been tested for safety using this supplier’s
partsandconsumables.Werecommendyou only use thesespeci-
fied supplies.
• Do not eat or swallow toner.
• Keep toner(used or unused) and toner cartridges out of reach of
children.
• This equipment is only to be installed by a qualified service
personnel.
RR
RR
RCAUTION:
m
o
r
t
o
m
n
R
R
R
v
• Deliver to collection point for waste products. Do not be disposed
of via domestic refuse collection.
R
vii
TABLE OF CONTENTS
1. GETTINGSTARTED ................................................... 1
HOW TO USE THIS COPY MACHINE............................. 1
WHERE IT IS & WHAT IT IS............................................ 4
CopierExterior ............................................................. 4
OperationPanel ........................................................... 6
RECOMMENDEDORIGINALS ........................................ 8
RECOMMENDEDPAPER ............................................ 10
TONER......................................................................... 12
2. COPYING................................................................. 13
BASICCOPYING ......................................................... 13
Using the Rear Table .................................................. 18
COPYINGONTO ROLLPAPER.................................... 19
Semi Synchro Cutting ................................................ 20
Preset Cutting ............................................................ 22
VariableCutting.......................................................... 23
USINGTHEROLLCUTTINGRAIL ................................. 24
3. COPY SETTINGS .................................................... 27
COPYING ONTOOTHER MEDIA .................................. 27
ADJUSTINGCOPYIMAGEDENSITY ........................... 29
MAKING SEVERAL COPIES OF THE
SAMEORIGINAL ......................................................30
SETTINGA LEADINGEDGE MARGIN.......................... 31
PARTIALCOPYING ...................................................... 32
PROGRAMMINGSETTINGYOU OFTENUSE .............. 34
A) Program key ......................................................... 34
B) Changing TheDefault Setting ................................ 35
viii
USERTOOLS ...............................................................36
Semi Synchro Cut Adjustment ....................................36
WHAT YOURSERVICEREPRESENTATIVE
CANCHANGE...............................................................37
4. MAINTAININGYOURCOPIER ..................................39
CHANGINGTHETONERBOTTLE .................................39
ADDINGTONER............................................................42
LOADING A ROLL OF PAPER.......................................45
LOADING A NEW ROLL
(ONTOROLLCUTTINGRAIL) ........................................49
5. TROUBLESHOOTING ...............................................51
If Something Goes Wrong ...........................................51
If A Service Indicator Lights Up ....................................51
IFJAMS OCCUR ...........................................................52
OTHERS .......................................................................58
THINGS TO DO EVERY DAY.........................................60
DO’S & DON’TS ............................................................61
WHERE TO PUT YOUR COPIER...................................62
6. SPECIFICATIONS .....................................................65
COPIER ........................................................................65
OPTIONS ......................................................................66
INDEX ...........................................................................67
1
1. GETTING STARTED
HOWTOUSETHIS COPYMACHINE
1Turn the machine switch on.
When the “Wait “ indicator goes off and the ”Set Paper” indicator goes on, the copier enter the
ready condition.
2Select any copy settings you require, such as the media type or copy density.
If you have Roll Feeder (option), press the R/F Select key to select “Roll Feeder”.
3Center the paper face up on the Copy Paper Table and slide the paper straight into the copier.
pThese illustrations show the copier with the Original Guides, the Paper Guides, and other
optional equipment.
Copy Media
Lighter Darker
Clear/Stop
Emergency Stop
Program
Clear Modes/
Energy Saver
Set
Paper RF
Select
Wait
Vellum
Film
Lighter Copy
Set
Original
Energy
Saver
Paper Length
Semi Synchro
Preset/
Variable
Leading Edge
Copy Counter
Function Select
RF Select/Cut
Copy Media
Lighter Darker
Clear/Stop
Emergency Stop
Program
Clear Modes/
Energy Saver
Set
Paper RF
Select
Wait
Vellum
Film
Cut Select
Preset Cut
Lighter Copy
Set
Original
Energy
Saver
PB001
PM001
2
4Set the Original Guides (option) to match the original size mark. Set the original face up and
slide it straight into the copier along the Original Guides.
5The original comes out from the opening just under the original table À.
The copy is delivered from the slot on top of the copier Á.
If you make several copies of the same original, when the copy comes out, remove it and repeat
from step3.
PB003
PB004
PB002
3
SB011
Notes
pIf you want to catch copies the back of the
machine, change the copy delivery directions
as shown in the figure.
This manual suits for next models
3
Table of contents
Other Ricoh Copier manuals
Ricoh
Ricoh Aficio FX10 User manual
Ricoh
Ricoh FW740 User manual
Ricoh
Ricoh Aficio FX10 User manual
Ricoh
Ricoh Aficio 480W User manual
Ricoh
Ricoh ST23 User manual
Ricoh
Ricoh Aficio MP 1600L User manual
Ricoh
Ricoh Priport JP5800 User manual
Ricoh
Ricoh Aficio MP 1350 User manual
Ricoh
Ricoh A220 User manual
Ricoh
Ricoh MP C4504 series Guide
Ricoh
Ricoh PE-P1 User manual
Ricoh
Ricoh Pro1106X User manual
Ricoh
Ricoh Aficio 401 User manual
Ricoh
Ricoh FT3813, FT4615, FT4618 User manual
Ricoh
Ricoh A193 User manual
Ricoh
Ricoh DSc535 User instructions
Ricoh
Ricoh E7 Series Service manual
Ricoh
Ricoh LDD745 User manual
Ricoh
Ricoh D037 User manual
Ricoh
Ricoh MP C2004 series Instruction sheet
