RFI LPDA Assembly instructions

rfi.com.au

Asia Pacific | EMEA | Americas

Installation Sheet

LPDA Installation guide

INS-43647-1

1. Ensure the antenna has not been damaged in transit. A visual inspection of welds, radiating elements,

boom assembly, cable and connector will reveal any obvious physical damage that could have occurred

during transportation.

2. Ensure your installation is clear of any hazards and the antenna will be free of any obstructions once

installed.

3. Ensure the correct mating connector is chosen for termination on the feeder cable.

4. Apply appropriate weather-proofing between the connector junctions through the use of suitable water

proofing tape and UV stable electrical tape. Strain relief is required on the cable tail adjoining the feeder

cable protecting the connector interface.

5. Ensure the mounting hardware (supplied) is adequately secured to the adjoining mast and antenna boom.

The “U-bolt which secure to the bracket to mast should be tightened to 15Nm / (11 lbf.ft)

Thank you for choosing RFI’s wideband, Low Passive Intermodulation, RoHS compliant antenna.

Follow the below instructions & diagrams for optimization and safe installation of your new antenna.

RFI recommends the use of suitably qualified installers to undertake this task.

Installation of antennas involves significant risks which could lead to serious injury or even death.

LPDA Installation guide

SPACERS

5 OFF

LPDA 3596-09

MOUNT POLE

CLAMP KIT

rfi.com.au

Asia Pacific | EMEA | Americas

INS-43647-1

Installation Sheet

LPDA Installation guide

6. By default the antenna is shipped with the mountig bracket in a vertically polarised mounting position. You

may change the polarisation of the antenna within the clamp assembly by removing the assembly, rotating

the antenna and re-installing the clamp assmebly to the antenna in the new polarisaiton.

Table of contents

Popular Antenna manuals by other brands

Alfa Network

Alfa Network APA-L01 Specifications

Naval

Naval PR-422CA Operation manual

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series manual

TERK Technologies

TERK Technologies TV44 owner's manual

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK quick start guide

HP J8999A instructions

MobilSat

MobilSat MSP-S Mounting instructions

Steren

Steren ANT-UHF 13 instruction manual

Novatel

Novatel 600-G User information

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna owner's manual

TRENDnet

TRENDnet TEW-AO12O Specifications

Radio Shack

Radio Shack 15-1837 owner's manual

CommScope

CommScope CMAX-OMFX-43M-I53 Installation instruction

Ramsey Electronics

Ramsey Electronics DAP25 Kit assembly and instruction manual

COBHAM

COBHAM SAILOR 800 VSAT Replacement procedure

Trango Systems

Trango Systems AD900-9 Specification sheet

Steren

Steren ANT-100 user manual

Proxim

Proxim 5054-PA-23 quick start guide