Reptile One RTF 300ST User manual
TM
Next Best Thing to Nature!
www.reptileone.com.au
Instruction version: 21/03/2017
RTF
300ST/600S/900S/
900ST/1200S
images are for illustration purposes only
O
P
E
N
C
L
O
S
E
Contents
1 x1
12 x2
16 x1
13 x2
15 x1
14 x1
2 x2
3 x2
4 x1
7 x4
8 x3
9 x1
10 x4
6 x1
11 x4
17 x1
NOTE: RTF-300ST has NO hole in
Mesh lid AND RTF-1200S has 2x
Mesh Lids
13 x1
ONLY FOR RTF-900S, RTF-900ST
and RTF-1200S Models
NOTE: RTF-300ST
comes with 1
1
2
1
7 x4
FRONT
3
2 x2
3 x2
4A
13
17
FOR RTF-300ST, RTF-600S, RFT-600ST ONLY
4B
13 x 2
17
4
5
8
FOR RTF-900S,RTF-900ST, RFT-1200S ONLY
6
16 *
15
6
*NOTE: Mesh Vent can be installed on top or
bottom. Depending on your preference
7
9
12 x2
FRONT
BACK
9
11 x4
8
14 10 x4
Model RTF-1200S
NOTE: Mesh Vent can be installed on top or
bottom. Depending on your preference
8 x2
NOTE: RTF-300S only NO hole in Mesh lid.
10
9
Congratulations! You have
completed assembly of your
RTF Terrarium.
We recommend the use of a Reptile One Cabinet (sold
separately) specically designed to suit the Reptile One
Terrarium purchased (this excludes the 300 models)
WARNING
This “RTF” enclosure has a watertight base and is suitable
to hold water. It is therefore important to ensure that your
enclosure rests on a strong and secure at, level surface.
Uneven surfaces may over time, warp your enclosure and
cause the watertight seals to be broken or cause glass to
crack. (Glass breakage is not covered under guarantee.)
The MAXIMUM recommended combined load to be placed
inside the enclosure must not exceed 20kg.
All loads must be spread evenly throughout the enclosure
to prevent glass base from cracking due to pressure points.
This manual suits for next models
4
Other Reptile One Other manuals
