Reolink E1 Series Quick start guide
E1 Outdoor
Operational Instruction
EN/DE/FR/IT/ES
https://reolink.com https://support.reolink.com
Aug 2021
QSG1_B
58.03.005.0009
Technical Support
If you need any technical help, please visit our ocial support site and contact our support
team before returning the products, https://support.reolink.com.
Technische Unterstützung
Wenn Sie Hilfe brauchen, kontaktieren Sie bitte Reolink Support Team zuerst, bevor Sie Ihre
Bestellung zurücksenden. Meiste Fragen oder Probleme können von unserem Online Support
Center beantwortet und gelöst werden: https://support.reolink.com.
Support technique
Si vous avez besoin d’aide, veuillez contacter Reolink avant de retourner votre produit. La
plupart des questions peuvent être répondues via notre centre de support en ligne à l'adresse
https://support.reolink.com.
Assistenza Tecnica
Se avete bisogno di aiuto, le chiediamo gentilmente di contattare Reolink prima di restituire il
prodotto. La maggior parte delle domande può essere risolta tramite il nostro centro di
assistenza online all'indirizzo https://support.reolink.com.
Soporte técnico
Si necesita ayuda, comuníquese con Reolink antes de devolver su producto. La mayoría de las
preguntas se pueden responder a través de nuestro centro de soporte en línea en
https://support.reolink.com.
REOLINK INNOVATION LIMITED
FLAT/RM 705 7/F FA YUEN COMMERCIAL BUILDING 75-77 FA YUEN STREET MONG KOK KL
HONG KONG
Hoferstasse 9B, 71636 Ludwigsburg, Germany
Product Ident GmbH
89 Princess Street, Manchester, M1 4HT, UK
APEX CE SPECIALISTS LIMITED
REP
EU
REP
UK
Contents What’s in the Box
What's in the Box
Camera Introduction
Set up the Camera
Mount the Camera
Troubleshooting
Specifications
Notification of Compliance
2
3
4
7
10
10
11
EN
2English
English
Quick
Start Guide
Surveillance
Sign
Mounting
Template
Power AdapterReolink E1 Outdoor Camera Bracket
1m
Network Cable
4.5m Power
Extension Cable
Pack of ScrewsReset Needle
1
Set up the Camera
4EnglishEnglish
Camera Introduction
Meaning of the Status LED:
It is recommended that the initial setup be completed with the Ethernet cable. You may follow the
steps below to set up your camera.
Step 1 Connect the camera to a LAN port on your router with an Ethernet cable.
Step 2 Use the power adapter provided to power on the camera.
Power AdapterRouter
Your Smart Device
Reolink E1 Outdoor
Power CableNetwork Cable
Wired Setup
WiFi connection failed
Status/LED
LED in Blue
WiFi is not configured
Camera is starting up
WiFi connection succeeded
SolidBlinking
Power Cable
Daylight Sensor
Spotlight
Micro SD Card Slot
Lens
Built-in Mic
Reset Button
* Rotate the lens to find the
reset button and the SD card slot.
* Press for more than five seconds to
restore the device to default settings.
Infrared Lights
Status LED
Network Cable
Speaker
3
• On Smartphone If you set up Reolink E1 Outdoor without the Ethernet cable, you may follow the steps below.
Scan to download the Reolink App.
6English
English
• On PC
Download path of the Reolink Client: Go to https://reolink.com > Support > App & Client.
Step 3 Download and launch the Reolink App or Client software, and follow the onscreen instruc-
tions to finish initial setup.
NOTE: If you access the camera via the Reolink Client, you may click the Add Device icon and
choose the UID option to enter the UID of your camera. The UID is on the camera body (right
below the QR code).
Wireless Setup
Step 1 Use the power adapter provided to power on the camera.
Step 2 Launch the Reolink App, click the “ ” button in the top right corner to add the camera.
Scan the QR code on the device and follow the onscreen instructions to finish initial setup.
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
5
For outdoor use, E1 Outdoor must be installed upside down for better waterproof performance.
Install the E1 Outdoor Camera
8EnglishEnglish
Pull the button of the security mount and
unscrew the bracket to separate the two
parts.
Screw the bracket to the bottom of the
camera.
Drill holes in accordance with the mounting
template and screw the security mount to the
wall.
Choose a proper direction of the camera and
then align the bracket to the security mount
and lock the camera in place by turning
anti-clockwise.
NOTE: Use the drywall anchors included in the package if needed.
Mount the Camera to the Wall
1
3 4
2
1
2
3
“click”
“click”
open close
7
10English
English
Camera is not Powering on
If your camera is not powering on, please try
the following solutions:
• Plug the camera into another outlet.
• Use another 12V power adapter to power on
the camera.
If these won't work, please contact Reolink
Support https://support.reolink.com
WiFi Connection Failed During Initial
Setup Process
If the camera failed to connect to WiFi, please
try the following solutions:
• Please ensure you have entered the correct
WiFi password.
• Put your camera close to your router to
ensure a strong WiFi signal.
• Change the encryption method of the WiFi
network to WPA2-PSK/WPA-PSK (safer
encryption) on your router interface.
• Change your WiFi SSID or password and
make sure that SSID is within 31 characters
and password is within 64 characters.
• Set your password using only the characters
on the keyboard.
If these won't work, please contact Reolink
Support https://support.reolink.com
Troubleshooting
Specifications
Operating Frequency: 2.4/5GHz Dual-band
Operating Temperature:
-10°C to 55°C (14°F to 131°F)
Frame Rate: 20fps (default)
Audio: Two-way audio
IR Cut Filter: Yes
Display Resolution: 5MP
IR Distance: 12 meters (40 ft)
Pan/Tilt Angle: Horizontal: 355° / Vertical: 50°
Power Input: DC 12V/1A
Hardware
Software Features
General
Pull the button of the security mount and unscrew the ceiling bracket from the mount.
Mount the Camera to the Ceiling
Install the bracket to the ceiling. Align the camera with the bracket and turn the camera unit
clockwise to lock it in position.
9
English 12
Reolink declares that this device is in
compliance with the essential requirements
and other relevant provisions of Directive
2014/53/EU.
Simplified EU Declaration
of Conformity
NOTE: We hope that you enjoy the new
purchase. But if you are not satisfied with the
product and plan to return it, we strongly
suggest that you reset the camera to factory
default settings and take out the inserted SD
card before returning.
This equipment complies with RSS-102
radiation exposure limits set forth for an
uncontrolled environment. This equipment
should be installed and operated with
Use of the product is subject to your
agreement to the Terms of Service and
Privacy Policy at reolink.com. Keep out of
reach of children.
By using the Product Software that is
embedded on the Reolink product, you agree
to the terms of this End User License
Agreement (“EULA”) between you and
Reolink. Learn more:
https://reolink.com/eula/.
This product comes with a 2-year limited
warranty that is valid only if purchased from
Reolink Ocial Store or a Reolink authorized
reseller. Learn more:
https://reolink.com/warranty-and-return/.
This marking indicates that this product
should not be disposed with other household
wastes throughout the EU. To prevent possible
harm to the environment or human health
from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse
of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the
product was purchased. They can take this
product for environment safe recycling.
Correct Disposal of This Product
Limited Warranty
Terms and Privacy
End User License Agreement
ISED Radiation Exposure Statement
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
Size: 84.7×117.8 mm
Weight: 380g
For more specifications, visit
https://reolink.com/.
Notification of
Compliance
FCC Compliance Statement
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation. For more information, visit:
https://reolink.com/fcc-compliance-notice/.
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment o and on, the user
is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
FCC RF warning statement:
The device has been evaluated to meet
general RF exposure requirement. The device
can be used in portable exposure condition
without restriction.
English
11
Überblick
Lieferumfang
Allgemeine Einführung
Kamera-Einrichtung
Kamera-Installation
Fehlerbehebung
Spezifikationen
Konformitätserklärung
15
16
17
20
23
23
24
DE
2412MHz---2472MHz (19dBm)
5150MHz---5350MHz (18dBm)
5470MHz---5725MHz (18dBm)
OPERATING FREQUENCY
(the maximum transmitted power)
English
minimum distance 20cm between the
radiator & your body.
Deutsch
13 14
Lieferumfang Allgemeine Einführung
Bedeutung des Status der LED:
Kurzanleitung
Päckchen
mit Schrauben
Schild
Videoüberwachung
Nadel zum
Zurücksetzen
Lochschablone
zur Montage
NetzadapterReolink
E1 Outdoor
Kamerahalterung
Netzwerkkabel
(1m)
Stromverlänge-
rungskabel (4,5m)
WLAN-Verbindung fehlgeschlagen
Status/LED
LED in Blue
WLAN ist nicht konfiguriert
Die Kamera startet
WLAN-Verbindung erfolgreich
Stabil leuchtetBlinkt
Stromkabel
Tageslichtsensor
Spotlight
MicroSD-Kartenslot
Objektiv
Eingebautes Mikrofon
Reset-Taste
* Drehen Sie das Objektiv, um das Reset-Loch
und den SD-Kartensteckplatz zu finden.
* Drücken Sie die Reset-Taste und
halten Sie für über 5 Sekunden zur
Wiederherstellung der Werkeinstellungen.
Infrarot-Scheinwerfer
Status LED
Netzwerkkabel
Lautsprecher
Deutsch Deutsch
15 16
• Smartphone
Scannen zur Installation der Reolink App.
Kamera-Einrichtung
• PC
Download-Pfad des Reolink Clients: Gehen Sie auf https://reolink.com/de/ > Support > App & Client.
Es wird empfohlen, die Ersteinrichtung mit dem Ethernet-Kabel abzuschließen. Sie können die
folgenden Schritte ausführen, um Ihre Kamera einzurichten.
Schritt 1 Schließen Sie die Kamera über ein Ethernet-Kabel an einen LAN-Anschluss Ihres Routers an.
Schritt 2 Versorgen Sie die Kamera mit dem mitgelieferten Netzadapter mit Strom.
Schritt 3 Laden Sie die Reolink App oder Client-Software herunter und starten Sie sie. Dann
befolgen Sie die Anweisungen auf dem Bildschirm, um die Ersteinrichtung abzuschließen.
Router
Drahtgebundene Einrichtung
Netzadapter
Ihr smartes Gerät
Reolink E1 Outdoor
StromkabelNetzwerkkabel
Deutsch Deutsch
17 18
Other manuals for E1 Series
7
Table of contents
Languages:
Other Reolink Outdoor Camera manuals
Reolink
Reolink Go PT User manual
Reolink
Reolink RLC-1212A User manual
Reolink
Reolink Argus 2 Quick start guide
Reolink
Reolink B5M11WA Quick start guide
Reolink
Reolink Duo User manual
Reolink
Reolink Duo 2 PoE Quick start guide
Reolink
Reolink Argus PT Ultra Quick start guide
Reolink
Reolink Argus PT User manual
Reolink
Reolink E1 Outdoor PoE Quick start guide
Reolink
Reolink Argus 2 Quick start guide
