Camera Adapter Inputs Signals
Video Signals: 1 - S I 3G, 6G, 12G [BNC]
2 - S I S , H ,3G [BNC]
1 - Reference [BNC]
Audio Signals: 1 - Balanced Analog (Line Level) [ B9]
1 - Balanced Microphone Input [ B9]
ata Signals: 1 - Serial ata (RS422) [RJ45]
1 - Ethernet 1GB [ RJ45]
2 - GPI In [RJ45] (1)
Camera Adapter Outputs Signals
Video Signals: 1 - S I S , H , 3G
Audio Signals: 1 - Unbalanced Analog Audio [ B9]
ata Signals: 1 - Serial ata (RS422) [RJ45]
1 - Ethernet 1GB (with opt. POE++) [RJ45](*)
1 - Tally Out (open collector) [RJ45]
Power : 1 - POE++ on Ethernet [RJ45] Option
1 - 12V Out [M8] (*)
Control Unit Inputs Signals per each Camera Adapter Channel
Video Signals: 1 - S I S , H , 3G [BNC]
1 - Reference (BB, Composite) [BNC]
Audio Signals: 2 - Unbalanced Analog (Line Level) [ B9]
ata Signals: 1 - Serial ata (RS422) [RJ45]
1 - Ethernet 1GB [ RJ45]
1 - Tally In [RJ45]
2 - GPI Out [RJ45]
Control Unit Outputs Signals per each Camera Adapter Channel
Video Signals: 1 - S I 3G, 6G, 12G [BNC]
2 - S I S , H ,3G [BNC]
Audio Signals: 1 - Balanced Line Output [ B25]
1 - Balanced Microphone Line Output [ B25]
ata Signals: 1 - Serial ata (RS422) [RJ45]
1 - Ethernet 1GB [RJ45]
2 - GPI Out (open collector) [RJ45]
Power : 1 - Main 90-240 Vac [V E with Fuse]
Hybrid Connection:
L: SMPTE LEMO 3K
N: Neutrik OpticalCon UO
Fiber Pair Version:
N: Neutrik uo Lite
P: LC/LC
[ No Power to CCA ]
Power Consumption: 20 W per channel without camera load
MAX Camera Load: 12 Volts-60W (default) or 40W on POE++
(*) only one option allowed
CCA Mechanical: imension: W x H x (182, 40, 219 mm)
Weight (1,9 Kg)
CCU Mechanical: imension: 1RU, epth 300mm
Weight: (1Ch 3,1 Kg) (2Ch 3,9 Kg)
2021 Subject to chan e
Note: Multiple Version Available. Contact us for details or visit our website
Camera Adapter
Audio Pinout ( B9)
1 Output Line A Audio +
2 Output Line B Audio +
3 Ground
4 Input Mic + (30db)
5 Input Line Audio +
6 Output Line A Audio -
7 Output Line B Audio -
8 Input Mic - (30db)
9 Input Line Audio -
Control Unit
Audio Pinout ( B25)
1 Output Mic 1+
2 Ground
3 Output Line 1-
4 Input Line A+
5 Ground
6 Input Line 1 B-
7 Output Mic 2+
8 Ground
9 Output Line 2 -
10 Input Line 2 A+
11 Ground
12 Input Line 2 B-
13 Ground
14 Output Mic 1-
15 Output Line 1+
16 Ground
17 Input Line A-
18 Input Line 1 B+
19 Ground
20 Output Mic 2-
21 Output Line 2+
22 Ground
23 Input Line 2 A-
24 Input Line 2 B+
25 Ground
Camera Adapter
C Out Pinout <5>
1 Out +12V
2 Out +12V
3 Ground
4 Ground
5 Out +12V
[Use supplied XLR4P adapter]
CCA Camera Mechanical Installation (e. .: AW-UE-150)
Fix Camera Mount Braket on top using 4 screw supplied or 4MA-10mm max
then follow the PTZ camera Installation manual
¼” holes available on bottom for Tripod or similar fixing
o not obstruct the flow of air, do not cover Fan gate and front holes
CCA & CCU
RS422 Pinout (RJ45)
1 TX-
2 TX+
3 Ground
4 RX-
5 RX+
6 Tally [→ CCA]
7 GPI 1 [→ CCU]
8 GPI 2 [→ CCU]
Camera Adapter Status LED
Powered
Camera Adapter Controls
No Controls
Control Unit Status LEDs
CCA Powered [CCA connected, Power supplied to camera]
Fiber Link Active [Fiber connection established]
Eth ata [Ethernet active (flashin )]
422 ata [Data present on RS422 bus (flashin )]
Tally [ Tally line activated]
Control Unit Controls
CCA Power Enables [Power savin ]
Microphone Phantom Enables [Channel 1 / Channel 2]
Fiber Solutions
ETH
AW-UE150 Connections Example
422
Control Unit (CCU) Back
Return Video
S I 3G from CCU
Microphone In
Phantom (On/Off)
Notes:
Various PTZ cameras
adapters, plates, cables
and tripod mount available.
Contact us for informations
V1.1 Subject to chan e
Camera Adapter
XLR-4P Cable
Adapter Pinout
1 Ground
2 Unused
3 Unused
4 Out +12V
