Reliance EC5805 User manual
Thank you for choosing the Reliance EC5805 Wi-Fi
Router (EC5805).
Note
Supported functions and actual appearance depend on the specific models
you purchased. The following illustrations are provided for your reference only.
For details about the model you selected, consult your service provider.
This guide briefly describes the functions of the EC58 5. For details about how
to set management parameters, see Help on the web management page.
If the EC58 5 is placed in an environment with poor ventilation, it may
overheat after extended use. When the EC58 5 overheats, it will switch off or
disconnect from the network automatically to protect itself. If this happens,
place the EC58 5 in a well-ventilated location, then restart the EC58 5.
Getting to Know Your EC5805
Packing List
The package should contain the following items. If any of the items are missing or
damaged, contact your local dealer immediately.
Main unit Battery Data cable Charger Quick Start Guide
Safety Information
Some accessories are optional and are not provided with the modem. To purchase
any optional accessories, contact your local dealer.
2
Connection Scenarios
A Wi-Fi device or computer can be connected to the Internet through the EC58 5.
The actual connection procedure depends on the operating system of the Wi-Fi
device or computer. The connection scenarios illustrated here are for your
reference.
Scenario 1 Multi-device access via Wi-Fi Scenario 2 One-device access via
USB
Smart phone Game machine
Digital camera
Laptop
Scenario 3 Multi-device access via Wi-Fi and USB at the same time
Smart phone Game machine
Digital camera
Laptop
1
2
3
4
5
6
Appearance
No. Item
1Wi-Fi/WPS indicator
2Wi-Fi/WPS button
3Power button
4Power indicator
5Signal indicator
6USB connector
Note
Wi-Fi: wireless fidelity
WPS: Wi-Fi protected setup
5
Indicator Status
Wi-Fi/WPS
Off: Wi-Fi and WPS are disabled.
Continuously on green: Wi-Fi is enabled.
Blinking green: The WPS is enabled.
Power
Blinking red: Battery power level is low and must be charged
immediately. Otherwise the EC58 5 will power off
automatically.
Continuously on red: Battery power is weak.
Blinking green: Battery is being charged.
Continuously on green: Battery power is good.
Signal
Continuously on red: The signal is inexistent
Continuously on blue: The signal is existent.
Fast blinking blue: The EC58 5 is dialing up to the Internet.
Continuously on green: The EC58 5 is connected to the
Internet.
Fast blinking green: The EC58 5 is uplink and downlink data.
Installing the Battery
Install the battery as shown.
12 3
Installing the microSD Card
Install the microSD card as shown.
Note
The microSD card is an optional accessory. If a microSD card did not come with
7
your Wi-Fi Router, you may purchase one yourself.
To remove the microSD card, press in the card
gently. The microSD card will pop out for
removal.
Do not remove the microSD card when it is
in use. Doing so may damage the card and
the EC58 5, and data stored on the card may be lost.
Charging the Battery
Note
If the battery has not been used for a long time, it must be charged first.
If the power indicator blinks red during the charging, you must wait for the
power indicator to blink green, and then use the EC58 5.
Method 1 Using the charger
Caution Only use chargers compatible with the
EC58 5 and provided by a designated manufacturer.
Use of an incompatible charger or one from an unknown
manufacturer may cause the EC58 5 to malfunction, fail, or
could even cause a fire. Such use voids all warranties, whether expressed or implied,
on the product.
Method 2 Connecting to a PC for charging
Connect the EC58 5 to a PC using a compatible data
cable.
9
Accessing the Internet via Wi-Fi Connection
Note By default, management parameters are preset on the EC58 5 according to
the requirements of the service provider. Follow the steps below to quickly access
the Internet. For the details about how to set management parameters, see Help on
the Web management page.
Step1 Power on the EC5805.
Step2 Establish a Wi-Fi Connection.
Step3 Access the Internet.
1. Power on the EC5805
Press and hold power button until the indicators turn on. The EC58 5 is powered
10
Table of contents
Other Reliance Wireless Router manuals
