Reliable 1000FR User manual
ELECTRIC CLOTH CUTTER INSTRUCTION MANUAL
1000FR
1
CONGRATULATIONS
We would like to thank you, and congratulate you for purchasing
the 1000FR round cloth cutter from Reliable.
For your safety and to fully enjoy the advantages of this product,
please take a few minutes to read all of the important safeguards
and care instructions. Keep this manual handy for your reference.
MATERIAL IS OWNED BY RELIABLE AND MAY NOT BE
REPRODUCED IN WHOLE OR IN PART WITHOUT EXPRESS
WRITTEN PERMISSION FROM RELIABLE CORPORATION
COPYRIGHT 2014 RELIABLE CORPORATION
2
INSTRUCTIONS
The 1000FR electric cloth cutter is designed to cut out various types of materials
such as: cloth, leather, plastic, films, etc. The following directions should be fol-
lowed before operating the product:
1. Sharpening: Lightly press the sharpener button and the grinding wheel
will sharpen the cutting edge.
2. Grinding wheel: Keep it clean with an alcohol-based cleaner to ensure that it
stays sharp.
3. Cutting blade: When it displays signs of wear, it should be replaced with a new
one.
4. Swing lubricator: Place a few drops of machine oil into the oil reservoir once a
day to reduce the friction between the cutting surfaces.
5. Carbon brushes (not shown): When the brushes wear down to less
than 4mm, they must be replaced with new ones.
WARNING: Cut off the power supply before any part is replaced. Keep motor and
shearing sides clean.
LUBRICATION
1. The cutting blade should be lubricated with NO. 30 machine oil once a day.
2. The gearing should be lubricated with grease once a month.
3. Motor bearings should be lubricated with grease once a year.
SPECIFICATIONS
MAX THICKNESS OF CUT 10MM
RATED POWER 60W
RATED VOLTAGE 220V/110V
NET WEIGHT 1KG
3
SWITCH BAR
SHELL
HARNESS
SCREW FOR SWITCH
SWITCH
MOTOR
COVER
COUPLING
WORM GEAR
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
1 7.
HEAD
WORM WHEEL
FOOT
KNIFE
B O LT
GRINDING WHEEL
KNIFE GUARD
POWER CORD
Reliable Corporation (“Reliable”) warrants to original purchaser of its products that every
product sold by Reliable (a “Reliable Product”) is free from defects in material and workmanship
for a period of one year from the date of purchase if properly used and maintained. Subject
to the conditions and limitations set forth below, Reliable will either repair or replace any part
of a Reliable Product that proves defective by reason of improper workmanship or materials.
If the defective Reliable Product is no longer available and cannot be repaired effectively or
replaced with an identical model, Reliable shall replace the defective Reliable Product with a
current Reliable Product of equal or greater value. Repaired parts or replacement products
will be provided by Reliable on an exchange basis, and will be either new or refurbished to be
functionally equivalent to new. If Reliable is unable to repair or replace a Reliable Product, it will
refund the current value of that Reliable Product at the time the warranty claim is made.
This limited warranty does not cover any damage to a Reliable Product that results from
improper installation, accident, abuse, misuse, natural disaster, insufficient or excessive
electrical supply, abnormal mechanical or envsteamermental conditions, wear and tear resulting
from normal use of the product, or any unauthorized disassembly, repair, or modification. This
limited warranty does not extend to any indirect, consequential or incidental damages that
may be suffered by a user or from the use of a Reliable Product, including without limitation,
any liability for third party claims for damage, and is limited to the amount paid by the original
purchaser Reliable Product with respect to which this limited warranty protection applies.
This limited warranty does not apply with respect to products that have been altered or which
are missing serial numbers or for products not purchased directly from Reliable or a dealer
authorized by us to sell Reliable Products.
This limited warranty is the only warranty that applies to any Reliable Product, supersedes any
and all terms that may be contained in any other document or purchase order and may not be
altered or amended except expressly in writing by Reliable.
To obtain a repair or replacement under the terms of this warranty, please contact our customer
service group at 1-800-268-1649 or at support@reliablecorporation.com. You will be required
to submit an original receipt via fax or e-mail. The receipt must reflect that you are the original
purchaser, the product was bought directly from us or from an authorized Reliable dealer and
that the warranty claim is being made within the warranty period. You will be issued a return
authorization number (RA#) and asked to ship the defective product together with proof of
purchase and RA#, prepaid insured to the following address:
Reliable Corporation, 5-100 Wingold Avenue, Toronto, ON M6B 4K7. Freight collect shipments
will be refused. The risk of loss or damage in transit will be borne by
the customer. Once Reliable receives the defective product, it will initiate the repair or
replacement process.
If you have any questions regarding this warranty, you may write to:
Reliable Corporation
100 Wingold Avenue, Unit 5
Toronto, Ontario
Canada M6B 4K7
www.reliablecorporation.com
RELIABLE PRODUCTS
WARRANTY
1 800 268 1649
www.reliablecorporation.com
Table of contents
Other Reliable Power Tools manuals
