Reka 20710 User manual
USER GUIDE
Full Motion TV Wall Bracket
MODEL NUMBER: 20710
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
Contents
1.
2.
3.
4.
5-11.
12.
13-14.
15.
Welcome Section
Information & Safety Instructions
Contents & Features
Pouch Part List
Installation
• Placing The Bracket
• Drilling (Brick Wall)
• Fitting The Plate
• Fitting The TV Mount
• Completing The Mount
Adjustments
• Adjusting The Viewing Angle
Alternative Installation
• Stud Wall
Specications
Copyright © 2019 Thunderbolt Photography, Richard Ross. All rights reserved.
All Photos and Illustrations may not be reproduced or used in any manner whatsoever without the
express written permission of the copyright holder.
Welcome Section
Congratulations!
You have made an excellent choice with the purchase of this quality
REKA® product.
By doing so you now have the assurance and peace of mind which
comes from purchasing a product that has been manufactured to
the highest standards of performance and safety, supported by the
high quality standards of Quesh Ltd.
We want you to be completely satised with your purchase, so this
REKA® product is backed by a comprehensive manufacturer’s
3 year warranty and outstanding after sales service through our
dedicated helpline.
We hope you enjoy using this product for many years to come.
If you require technical support or in the unlikely event that your
purchase is faulty, please telephone our helpline for immediate
assistance. Faulty product claims made within the 3 year warranty
period will be repaired or replaced free of charge provided that you
have a satisfactory proof of purchase (keep your receipt safe).
This does not affect your statutory rights. However be aware that the
warranty will become null and void if the product is found to have
been deliberately damaged, misused and/or disassembled.
1
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
Information &
Safety Instructions
Additional Equipment Required (brick):
• Safety goggles
• Paper dust mask
• Safety step/work platform
• Masking or electrician tape
• Pencil
• 4mm or 5mm Masonry drill bit (Brick mounting only)
• 4mm or 5mm Twist drill bit (Stud mounting only)
• 10mm Masonry drill bit (Brick mounting only)
• 10mm Twist drill bit (Stud mounting only)
• Hammer action drill
• Hammer
• Large at head or pozidrive screwdriver
• 10mm Spanner or socket wrench
Keep the work environment trip and hazard free before beginning
and during installation.
Always refer to the manufacturers safety instructions and guides
before using power tools.
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
2
Contents & Features
3
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
Contents
1 x Hinged Wall Mount
1 x Rear Plate
4 x VESA Mount Arms
4 x M6 x 55mm Coach Screw
4 x 10mmØ x 50mm Wall Plug
4 x 5mmØ Washer
8 x 6mmØ Washer
4 x 8mmØ Washer
4 x M4 x 14mm Screw
4 x M5 x 14mm Screw
4 x M6 x 14mm Screw
4 x M8 x 14mm Screw
4 x M6 x 12mm Bolt
4 x M6 Nut
1 x Cable Tie
1 x Mini Bubble Level
Features
• Mounts up to VESA 400mm x 400mm
• 180° Triple Articulated Arm
• Arm Reach 65mm to 420mm
• +5° to -15° Screen Tilt
• 30Kg Max load
• Cable tie
• Multi Position Arm Mounts
(VESA - Video Electronics Standards Association)
4
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
Pouch Parts List
A B
C
WALL FITTINGS
M6 x 55mm Coach Screw 10mmØ x 50mm Wall Plug
6mmØ
Washer
G
F
D
E
H
I
J
VESA MOUNT FITTINGS
M4 x 14mm Screw
M5 x 14mm Screw
M6 x 14mm Screw
M8 x 14mm Screw
5mmØ x 14mm Washer
6mmØ x 14mm Washer
8mmØ x 14mm Washer
KL
ARM FITTINGS
M6 x 12mm Bolt M6 Nut
5
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
Installation
Place the mount over the centre mark. Take the bubble level, place
it on the top edge of the plate and adjust it until the bubble is rest-
ing in the middle of line marks. Once level mark the four corner
holes with a pencil being careful not to move the plate.
Alternatively you can trace the outline and holes of the plate on to
a blank piece of A4 paper. Level the drawn guide with the bubble
level and use that to guide you where to drill the holes.
Placing The Bracket
Test place the wall bracket around the room until you nd the best
suitable location for it, then draw a rough centre line on your
chosen location. Please take into consideration the size of the
TV/monitor for clearance as well as plug and aerial socket
placements. Be careful of pipes and electrical wiring before drilling.
6
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
Installation
Drilling (Brick Wall)
After the drill hole placements have been marked, clear the work
area so it is safe to work in. Place dust sheets if required.
If the placement is above chest height you will need to use a safety
step or work platform to minimise risk of injury whilst using power
tools.
You will need to drill a smaller pilot hole before the larger 10mm
hole. This will minimise any possible damage and injury or
accidents.
Fit the 4mm or 5mm masonry drill bit to the hammer drill. Place the
wall plug next to the drill bit with the tips level. Wrap a little masking
or electricians tape about 5mm above the height of the wall plug.
This will mark the depth of how far you need to drill.
Next, t and mark the 10mm masonry drill bit in the same way as
previously mentioned and redrill the holes to the larger diameter.
7
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
Installation
Fitting The Plate
First, place the wall plugs into the drilled holes and tap in gently
with a hammer to seat them ush to the wall.
Next insert the M6 x 55mm coach screws (pouch ‘A’) through the
6mmØ washers (pouch ‘C’) ready for use.
Line the holes of the plate to the drilled holes on the wall and insert
the screws. Tighten with a 10mm spanner or socket wrench until
securely tight.
B C A
8
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
Installation
Once the plate has been securely tted, place the cover cap to hide
the bolts and neaten up the tting.
Safely secure power tools after you have nished drilling.
Brush and wipe down surfaces free of brick dust and hoover the
work area clean..
Table of contents
