Regulus Solar 1 User manual

Pumping station 1-way “Solar 1”

Return

SAFETY: Please read the directions carefully before to set the unit going, in order to avoid accidents and damages in the

plant caused by an incorrect use of the product. Keep this manual for future consultations.

(A) all valve on the return way

(thermoter with blue ring and scale

0-120°C) with “Solar” checkball.

Solar Checkball

It is included into the ball valve.

It ensures the seal and low head

losses. To exclude the checkball valve,

for instance in case of emptying rotate

the handle by 45° clockwise.

(D) Circulating pump

Three speed circulating pump

with manual regulation. Thanks

to the seal of the ball valves

before and after the circulating

pump, it can be removed without

emptying the installation.

Back plate to fasten the unit

to the wall or to the cylinder.

(B) Security unit

The security unit, CE and TÜV

approved, protects the installation

from the overpressures. It is

calibrated at 6 bar, over this

pressure the security unit starts. It is

also provided with a manometer

and with a connection to the

expansion vessel by a 3/4" flexible

kit (optional), see here below.

The flowmeter allows to regulate the flow rate to the capacity

of the installation, by a 3-way ball valve. If the valve is closed

the usual circulation is cut off, it is possible to use the side

filling tap to fill the installation.

There is also another side tap, for the draining.

The proximity of the two taps helps these operations

minimizing the distance between the filling and the draining.

The flow rate is measured and shown by the special sliding

cursor: the measurement is immediate thanks to the proximity

to the regulation valve.

As shown hereinunder four flowmeters are available with

different intervals of measurement:

1-6 l/min, 2-12 l/min, 8-28 l/min and 8-38 l/min.

Seat for the

course of the

cable going to the

circulating pump.

Epp insulation box

Measurements 150x425x150.

Box with a special bracket to fasten the unit and

with the groove for the cable.

Cover with the opening for the cable press. (The

cable press must be positioned towards the

down, see the picture). Side opening for the

security unit. A special window allows to read and

to regulate the flow without removing the cover.

Rev.0 - 26/05/09

Housing seat of of the controller.

At the side there is a passing hole that

allows the wiring to reach the circulating

pump. The passing hole for the sensor

and for the outside of the insulation box.

(1) - Filling the installation:

Remove the plugs from the side valves and

connect the hose unions. Close the ball

valve and open the side filling valve and

draining valve.

(2) - Starting the installation working:

Open the ball valve and close the side filling and draining valves.

Remove the hose unions and screw again the plugs.

To avoid any casual opening of the side valves, it isbetter to stop the

levers in the close position, as shown here aside.

Drain

Filling

Ball valve

closed Ball valve

open

Regulation of

the flow rate

(3) - Regulate the flow rate using the regulation

rod until the right flow rate is shown.

N.B. The flow rate is shown taking as reference

the lower edge of the sliding cursor. (see

picture)

Flow rate shown

(in this case

8 L/min)

Directions for the use of the flowmeter to fill the installation:

Blocking the filling/drain

levers:

Unscrew thefixing screw,

take out thelever andplace

itagain turning it of 180°.

TAKE CARE: as regards the installation and the working of the controller, please look to the here enclosed manual.

Pumping station 1-way “Solar 10”

Back plate to fasten the unit

to the wall or to the cylinder.

3/4" flexible kit

(optional)

Empty way for the solar

collectorsensor

Circulating pump with

Molex connector

Epp insulation box

Measurements 215x440x150.

It includes a controller holder insert

suitable for the course of the power

supply cable and of the temperature

sensor cables. Side opening on the back

part of the insulation box for the security

unit. Back plate to fasten the unit to the

wall or to the cylinder.

Exit of the controller's

wiring (sensors, power

supply, circul. pump).

This manual suits for next models

Other Regulus Water Pump manuals

Regulus

Regulus CSE TV ZV G 1F User manual

Regulus

Regulus LK 810 TermoMat 2.0 G ECO User manual

Regulus

Regulus CSE MIX W8 5/4F User manual

Regulus

Regulus CSE TC W iPWM MFB User manual

Regulus

Regulus BIO 55 MIX W-PWM 1F TRS6K User manual

Regulus

Regulus CSE TV ZV G70 3/4F User manual

Regulus

Regulus CSE SOL W SRS1 T User manual

Regulus

Regulus CSE MIX W8-SC 1M User manual

Regulus

Regulus CSE2 SOL G P User manual

Regulus

Regulus CSE OTS MFB+ZV G User manual

Regulus

Regulus CSE OTS MFB+ZV W User manual

Regulus

Regulus CSE2 MIX-BP F W 1F User manual

Regulus

Regulus CSE2 MIX-BP F W 1F User manual

Regulus

Regulus CSE MIX W6 1F User manual

Regulus

Regulus CSE2 MIX F W 1F User manual

Regulus

Regulus FlowCon B Owner's manual

Regulus

Regulus CSE2 MIX F W 1F User manual

Regulus

Regulus CSE2 MIX F W 1F User manual

Regulus

Regulus CSE1 SOL G P User manual

Regulus

Regulus CSE OTS W6 User manual

Regulus

Regulus CSE2 MIX-BP F W 1F User manual

Regulus

Regulus CSE2 MIX-BP F W 1F User manual

Regulus

Regulus CSE MIX W6-SC 1F User manual

Regulus

Regulus CSE SOL W SRS1 T-E User manual

Popular Water Pump manuals by other brands

Neptun

Neptun NPHW 5500 operating instructions

Sensidyne

Sensidyne Gilian BDX-II Operation & service manual

Draper

Draper 47808 instructions

Trolla

Trolla 12820 manual

Sunfab

Sunfab SVH Series installation guide

WilTec

WilTec 50740 Operation manual

Fieldmann

Fieldmann FVC 5015 EK user manual

Everbilt

Everbilt EFSUB5-122HD Use and care guide

Graco

Graco Husky 3300e manual

esotec

esotec 101018 operating manual

moyno

moyno 2000 CC Service manual

Becker

Becker BASIC VASF 2.80/1-0.AC230 operating instructions

Sykes AmeriPumps

Sykes AmeriPumps GP100M Operation and maintenance instructions

DUROMAX

DUROMAX XP WX Series user manual

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 operating instructions

Franklin Electric

Franklin Electric IPS Installation & operation manual

Xylem

Xylem e-1532 Series instruction manual

Milton Roy

Milton Roy PRIMEROYAL instruction manual