Regency IP28-PROPANE Quick start guide

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE

REFERENCE

Models: IP28-NG

IP28-PROPANE

IP28-ULPG

Owners &

Installation

Manual

04/07/15

LISTINGS AND CODE APPROVALS

These gas appliances have been tested in

accordance with AS4553, NZS 5262 and

have been certied by the Australian Gas

Association for installation and operation as

described in these Installation and Operating

Instructions.

Your unit should be serviced annually by

an authorised service person.

918-938f

IP28 GAS INBUILT

FOR YOUR SAFETY

What to do if you smell gas:

Do not try to light any appli-

ance

Do not touch any electri-

cal switch: do not use any

phone in your building.

Immediately call your gas

supplier from a neighbour's

phone. Follow the gas sup-

plier's instructions.

If you cannot reach your

gas supplier, call the re

department.

WARNING:

Improper installation, adjustment, altera-

tion, service or maintenance can cause

injury or property damage. Refer to this

manual. For assistance or additional in-

formation consult an authorised installer,

service agency or the gas supplier.

FOR YOUR SAFETY

Do not store or use gasoline or other am-

mable vapours and liquids in the vicinity of

this or any other appliance.

Installation and service must be performed

by an authorised installer, service agency or

the gas supplier.

2Regency IP28 Gas Inbuilt Fireplace

REGENCY

GAS INBUILT FIREPLACE

TO THE NEW OWNER

Congratulations! You are the owner of a state-of-the-art Gas Inbuilt Fireplace by FPI. The Regency

Gas Fireplace Series of appliances has been designed to provide you with all the warmth and

charm of a replace, at the ick of a switch. The model IP28 of this series has been approved

by Australian Gas Association for both safety and efciency. As it also bears our own mark, it

promises to provide you with economy, comfort and security for many trouble free years to follow.

Please take a moment now to acquaint yourself with these instructions and the many features of

your Regency Fireplace.

Regency IP28 Gas Inbuilt Fireplace 3

DIMENSIONS

UNIT DIMENSIONS W/ CONTEMPORARY FACEPLATE

MODULAR FACEPLATE AND INFILL PANEL

37.150

(944mm)

28.180

(716mm)

18.850

(476mm)

23.327

(593mm)

14.911

(379mm)

27.298

(694mm)

38-5/16"

33-1/2"

28-5/16"

25-7/8"

3/8"

1-5/8"

(973mm)

(848mm)

(657mm)

(719mm)

(41mm)

(10mm)

4Regency IP28 Gas Inbuilt Fireplace

DIMENSIONS

UNIT DIMENSIONS W/ SLIM LINE FACEPLATE

40-1/2”(1030mm)

28-5/8” (725mm)

16 - 7/8”

27-5/16”

23-3/8”

(593mm)

(427mm)

(693mm)

18.850

475.8

Regency IP28 Gas Inbuilt Fireplace 5

DIMENSIONS

DIMENSIONS - OPTIONAL MODULAR FIREPLACE SOLUTION

DIMENSIONS - OPTIONAL WEATHER BOX

49”(1245mm)

50-3/16” (1275mm)

34-7/8”(886mm)

36-15/16”(938mm)

18-5/16”(465mm)

105°

775mm

822mm

819mm

410mm

6Regency IP28 Gas Inbuilt Fireplace

TABLE OF CONTENTS

DATA BADGE

Copy of Data Badge .....................................................4

INSTALLATION

Important Message ........................................................8

For Your Safety ..............................................................8

Materials Required ........................................................8

Before You Start ............................................................8

Masonary Minimum Fireplace Opening Dimensions .....9

Contemporary Fascia ....................................................9

Slim Line Fascia ............................................................9

Combustible Mock replace" Minimum Fireplace opening

Dimensions ....................................................................9

Clearances To Combustibles .........................................9

Optional Modular replace solution Clearances ..........10

Mock Fireplace kit (zero clearance) installation........... 11

Gas Pipe Pressure Testing ..........................................12

Exterior Flue Termination Locations ............................13

Venting and termination ...............................................14

Aeration Settings .........................................................15

Conversion Kit for NG to LPG Model...........................16

Conversion Kit for NG to ULPG Model ........................17

Optional Stainless steel inner panel install ..................21

Switch operation ..........................................................22

Log set installation .......................................................23

Glass Door installation.................................................24

Contemporary faceplate Installation ............................25

Hearth trim Installation.................................................26

Slim line faceplate Installation .....................................27

Optional inll panel Installation ....................................28

Modular faceplate Installation ......................................29

Final Check..................................................................30

Wiring ..........................................................................30

Standard wiring............................................................30

OPERATING INSTRUCTIONS

Operating Instructions ................................................31

Lighting Instructions.....................................................31

Shutdown Instructions .................................................31

First Fire ......................................................................31

Remote Control ..........................................................31

Copy Of Lighting Instruction Plate ...............................33

Normal Operating Sounds Of .....................................33

Gas Appliances............................................................33

Resetting the unit.........................................................33

MAINTENANCE

Door Glass ..................................................................35

Replacement ...............................................................35

Glass Gasket ...............................................................35

Convection Fan replacement.......................................36

Combustion Fan replacement .....................................37

Pressure switch replacement ......................................38

Valve assembly replacement .......................................39

PARTS LIST

Main Assembly ............................................................41

Contemporary Faceplate Assembly.............................42

Slim line Faceplate Assembly ......................................42

WARRANTY

Warranty ......................................................................43

Regency IP28 Gas Inbuilt Fireplace 7

SAFETY LABEL

(Australia Only)

This is a copy of the label that accompanies each Regency IP28 Gas Inbuilt replace. We have printed a copy of the contents here for your review.

DATA BADGE NOTE: Regency units are constantly being improved. Check the label on the unit and if there is a difference, the label on the unit is the

correct one.

8Regency IP28 Gas Inbuilt Fireplace

INSTALLATION

IMPORTANT MESSAGE

The Regency Gas Inbuilt must be installed in ac-

cordance with these instructions. Carefully read all

the instructions in this manual rst.

Note: Failure to follow these instructions could

cause a malfunction of the heater which

could result in death, serious bodily in-

jury, and/or property damage. Failure to

follow these instructions may also void

your re insurance and/or warranty.

FOR YOUR SAFETY

This appliance requires air for proper combustion.

Always provide adequate combustion and ventila-

tion air. Follow instructions and information in the

current AS5601, NZS 5262 or local codes. Consult

the "authority having jurisdiction" to determine the

need for a permit prior to starting the installation.

BEFORE YOU START

INSTALLATION AND REPAIR SHOULD

BE DONE ONLY BY AN AUTHORISED

PERSON.

1) The appliance shall be installed in accordance

with the manufacturer's installation instructions,

local gas tting regulations, municipal building

codes, water supply regulations, electrical wir-

ing regulations, with AS5601. (AGA gas instal-

lation code) NZS 5262(New Zealand). Special

conditions ie. marine environment, should be

avoided.

2) The appliance should be inspected before

use and at least annually by an authorised

service person. More frequent cleaning may

be required due to excessive lint from carpet-

ing, bedding material, etc. It is imperative that

control compartments, burners and circulating

air passageways of the appliance be kept clean

and free from excessive lint from carpeting.

3) Always connect this space heater to a approved

ueing and termination provided. Flue to the

outside of the building envelope. Never ue to

another room.

4) Inspect the ueing system annually for blockage

and any signs of deterioration.

5) Any safety glass removed for servicing must

be replaced prior to operating the appliance.

6) To prevent injury, do not allow anyone who is

unfamiliar with the operation to use the replace.

MATERIALS REQUIRED

A 240 Volt AC power cord is hooked up to the unit.

Plug 3 wire cord into a suitable receptacle. Do not

cut the ground terminal off under any circumstances.

When connected with 240 volts, the appliance

must be electrically grounded in accordance with

local codes.

This unit is polarity sensitive and will not

operate if polarity is incorrect.

The power connection must be accessible with

the appliance installed as per AS5601.

GAS CONNECTION WARNING

Only persons licensed to work with gas piping

may make the necessary gas connections to

this appliance.

Regency IP28 Gas Inbuilt Fireplace 9

INSTALLATION

12"Mantel

(305mm)

3-1/2" (89mm)

Mantel

20”(508mm)

Top

Faceplate

12 64

810

Side View

11"(279mm)

Mantel Clearances

CLEARANCES TO

COMBUSTIBLES

Minimum Clearances to Combustibles

From Unit

Sides A 2" / 51mm

Ceiling B 39-3/8" / 1000mm

Mantel C 11" / 279mm

Max. Mantle Depth E 12" / 305mm

(see Dia. 2)

Min. Alcove Width F 44-7/8" / 1139 mm

Max. Alcove Depth G 36" / 914 mm

*No hearth required.

MASONARY MINIMUM

FIREPLACE OPENING

DIMENSIONS

(CONTEMPORARY FASCIA)

The minimum replace dimensions for the

Regency gas space heater when using the

Contemporary Fascia are shown in the follow-

ing diagrams:

NOTE: ALLOW FOR SIDE GAS CONNEC-

TION - IF REQUIRED

COMBUSTIBLE

"MOCK FIREPLACE"

MINIMUM FIREPLACE

OPENING DIMENSIONS

The minimum replace dimensions for the

Regency gas space heater when installing into

a combustible mock replace are shown in the

following diagrams:

15-1/8” (384mm)

23-1/2” (597mm)

15-1/8” (384mm)

27-1/2” (699mm)

(SLIM LINE FASCIA)

The minimum replace dimensions for the Regency

gas space heater when using the Slim line Fascia

are shown in the following diagrams:

NOTE: ALLOW FOR SIDE GAS CONNECTION

- IF REQUIRED

490mm

702mm

490mm

770mm

490mm

702mm

450mm

770mm

(For Slim line Fascia)

(For Contemporary Fascia)

23-1/2” (597mm)

17” (432mm)

28-7/8” (735mm)

27-1/2” (699mm)

17” (432mm)

10 Regency IP28 Gas Inbuilt Fireplace

INSTALLATION

OPTIONAL MODULAR FIREPLACE SOLUTION CLEARANCES

51-7/16” (1305mm)

39-3/8” (1000mm)

1-7/16”

(37mm)

36”

(914mm)

51-7/16” (1305mm)

33-7/16” (848mm)

25-7/8”

(655mm) 20-5/8”

(523mm)

918-971 11/24/10

IP28

490mm

702mm

450mm

770mm

MOCK FIREPLACE KIT (ZERO CLEARANCE) INSTALLATION

Zero Clearance Kit

6 Standoffs

2 Side Brackets

1 Insulation Blanket

COMBUSTIBLE MOCK FIREPLACE KIT INSTALLATION:

Minimum cavity size for Low proﬁle faceplate:

702mm Height x 770mm Width x 490mm Depth

Minimum cavity size for Contemporary faceplate:

702mm Height x 770mm Width x 450mm Depth

VENTING CLEARANCES: 10mm is required all around

venting

INSTALLATION OF MOCK FIREPLACE KIT:

1) Install top two 110 mm stand offs to the top of unit.

Install two 67 mm stand offs to the back of unit - install two 55 mm stand offs to the each side of unit.

2) Install left and right side nailing ﬂ ange.

3) Lay insulation blanket on top of unit so it is ﬂ ush and tight against backside of faceplate.

4) Unit is now ready for install into a combustible cavity that has the above mentioned clearances.

10mm

Top standoffs x 2

Back standoffs x 2

Insulation blanket

Side standoffs x 2

1 on each side

Side Nailing Flange x 2

1 on each left & right

490mm

702mm

490mm

770mm

NOTE: Please adjust nailing ﬂ anges in relationship to either Contemporary or Low Proﬁle Faceplate. Faceplate needs to be ﬂ ush against ﬁ nished wall.

Low Proﬁle Fascia Contemporary Fascia

This manual suits for next models

Table of contents

Other Regency Indoor Fireplace manuals

Regency

Regency Bellavista B36X Quick start guide

Regency

Regency Cascades I1500 Quick start guide

Regency

Regency bellavista b41xte User manual

Regency

Regency Cascades I2500 User manual

Regency

Regency Gas Insert E21-NG3 Quick start guide

Regency

Regency HZ54E-NG10 Quick start guide

Regency

Regency Sunrise U32SE-NG5 Quick start guide

Regency

Regency L390E-NG1 Quick start guide

Regency

Regency Energy U31 User manual

Regency

Regency CB40EPV Series User manual

Regency

Regency I35-NG Quick start guide

Regency

Regency H2100 User manual

Regency

Regency I100B-1 BERWICK Quick start guide

Regency

Regency City Series San Francisco Bay 40 User manual

Regency

Regency City CB50E Quick start guide

Regency

Regency Greenfire GF1500L Series Quick start guide

Regency

Regency Classic I1200S Quick start guide

Regency

Regency P121-NG2 Quick start guide

Regency

Regency I100B-1 BERWICK Quick start guide

Regency

Regency U31-NG10 Quick start guide

Regency

Regency LIBERTY L676-NG Quick start guide

Regency

Regency Bellavista B41XT-NG1 Quick start guide

Regency

Regency PG33-NG Quick start guide

Regency

Regency City CST60E Quick start guide

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual