Regency Bellavista B36X Quick start guide

WARNING:

If the information in these instructions are not followed exactly,

a ﬁre or explosion may result causing property damage,

personal injury or loss of life.

FOR YOUR SAFETY

Do not store or use gasoline or other ﬂammable vapors and

liquids in the vicinity of this or any other appliance.

Installation and service must be performed by a qualiﬁed

installer, service agency or the gas supplier.

FOR YOUR SAFETY

What to do if you smell gas:

Do not try to light any appliance

Do not touch any electrical switch:

do not use any phone in your

building.

Immediately call your gas supplier

from a neighbour's phone. Follow

the gas supplier's instructions.

If you cannot reach your gas

supplier, call the ﬁre department.

FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4

918-759a

Regency Bellavista™B36X

Gas Fireplace

05/02/11

Owners &

Installation Manual

www.regency-ﬁre.com

Tested by: Installer: Please complete the details on the back cover

and leave this manual with the homeowner.

Homeowner: Please keep these instructions for future reference.

MODEL: B36X

Medium DV Gas Fireplace

2Regency Bellavista™ B36X Gas Fireplace

To the New Owner:

Congratulations!

You are the owner of a state-of-the-art Gas Fireplace by REGENCY®. The Bellavista™ B36X

has been designed to provide you with all the warmth and charm of a wood ﬁreplace at the ﬂick

of a switch. The Bellavista™ B36X has been approved by Warnock Hersey for both safety and

efﬁciency. As it also bears our own mark, it promises to provide you with economy, comfort and

security for many trouble free years to follow. Please take a moment now to acquaint yourself

with these instructions and the many features of your Regency®Fireplace.

Regency Bellavista™ B36X Gas Fireplace 3

MANUFACTURED MOBILE HOME REQUIREMENTS

INFORMATION FOR MOBILE/MANUFACTURED HOMES AFTER FIRST SALE

This Regency®product has been tested and listed by Warnock Hersey as a Direct Vent Wall Furnace to the following standards: VENTED

GAS FIREPLACE HEATERSANSI Z21.88a-2007 / CSA2.33a-2007 and GAS-FIREDAPPLIANCES FOR USEAT HIGHALTITUDES CAN

/ CGA 2.17-M91.

This Direct Vent System Appliance must be installed in accordance with the manufacturer's installation instructions and the Manufactured

Home Construction and Safety Standard, Title 24 CFR, Part 3280, or the current Standard of Fire Safety Criteria for Manufactured Home

Installations, Sites, and Communities ANSI/NFPA 501A, and with CAN/CSAZ240-MH Mobile Home Standard in Canada.

This appliance installation must comply with the manufacturer's installation instructions and local codes, if any. In the absence of local codes

follow the current National Fuel Gas Code, ANSI Z223.1 and the current National Electrical Code ANSI/NFPA 70 in the U.S.A., and the

current CAN/CGA B149 Gas Installation Code and the current Canadian Electrical Code CSA C22.1 in Canada.

This appliance comes equipped with a dedicated #8 Ground Lug for attachment of the ground wire to the steel chassis as applicable to

local codes.

The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the

National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSAC22.1.

This appliance may only be installedin anaftermarket permanently located,manufactured (U.S.Aonly) or mobile home, wherenot prohibited

by local codes.

This appliance can only be used with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases.

Ensure that structural members are not cut or weakened during installation.

4Regency Bellavista™ B36X Gas Fireplace

TABLE OF CONTENTS

SAFETY LABEL

Copy of Safety Decal.....................................................5

REQUIREMENTS

MA Code - CO Detector.................................................6

DIMENSIONS

Unit Dimensions ............................................................7

INSTALLATION

Important Message ......................................................8

Before You Start ............................................................8

General Safety Information............................................8

Installation Checklist.....................................................9

Locating Your Gas Fireplace.........................................9

Heatwave Duct System ................................................9

Clearances ..................................................................10

Mantel Clearances.......................................................11

Mantel Leg Clearances................................................11

Framing ......................................................................12

Finishing......................................................................13

Unit Assembly Prior to Installation...............................14

Top Standoff Assembly........................................14

Top Facing Support..............................................14

Side Nailing Strips ...............................................14

Top Flue Collar Installation..................................15

Venting Introduction.....................................................16

Exterior Vent Termination Requirements.....................17

Approved Venting Conﬁgurations................................18

Rigid Pipe Cross Reference Chart ..............................20

4" X 6-5/8" ...........................................................20

5" X 8" ................................................................22

Horizontal Terminations...............................................24

Regency®Direct Vent Flex System (5" x 8")........24

Rigid Pipe venting arrangements (5" x 8")...........25

Rigid Pipe Venting Systems.................................26

HORIZONTAL 5” x 8” rigid REAR VENT KIT..............27

Venting Arrangements ................................................28

Allowable Vertical Terminations...........................28

4" x 6 - 5/8" pipe venting arrangements...............28

Venting Arrangements Horizontal Termination ....29

Horizontal Venting with Two (2) 90oElbows................29

Horizontal Venting with Three (3) 90oElbows .............30

Vertical Venting with Three (3) 90oElbows..................30

Vertical Termination With Co-linear Flex System.........31

Venting Arrangement - Vertical Terminations ..............32

Unit Installation with Horizontal Termination ...............33

Unit Installation............................................................34

Unit installation with Vertical Termination ....................35

Gas Line Installation....................................................35

Pilot Adjustment...........................................................36

High Elevation .............................................................36

Gas Pipe Pressure Testing..........................................36

S.I.T. Valve Description................................................36

Aeration Adjustment ....................................................37

Wiring Diagram............................................................37

Wiring diagram for Gtmf remote..................................38

Vent Restrictor, Bafﬂe & Heat Deﬂector Installation ....39

Conversion from NG to LP ..........................................40

DC Sparker installation................................................42

Brick panel installation.................................................43

Optional panel installation ...........................................44

Log set installation.......................................................46

Optional Wall Thermostat ...........................................49

Optional Remote Control.............................................49

Wall Switch (Included).................................................49

Fan Installation............................................................51

Flush glass door Installation........................................52

Optional ﬁnishing trim Installation................................53

Flush Louvers and Flush Panel installation.................53

Full Screen Arch Door and Frame Installation.............54

OPERATING INSTRUCTIONS

Operating Instructions .................................................55

First Fire ......................................................................55

Lighting Procedure ......................................................55

Shutdown Procedure...................................................55

Normal Operating Sounds Of Gas Appliances............55

Copy of Lighting Plate Instructions..............................56

MAINTENANCE

Maintenance Instructions.............................................57

Log Replacement ........................................................57

Thermopile / Thermocouple.........................................57

Door Glass...................................................................57

Removing Valve...........................................................58

Installing Valve.............................................................58

PARTS LIST

Main Assembly ............................................................59

Burner Assembly .........................................................61

WARRANTY

The Warranty: Limited Lifetime ...................................63

Regency Bellavista™ B36X Gas Fireplace 5

SAFETY LABEL

This is a copy of the label that accompanies

each Bellavista™ B36X Direct Vent Gas

Fireplace. We have printed a copy of the

contents here for your review.

NOTE: Regency®units are constantly being

improved. Check the label on the unit and if

there is a difference, the label on the unit is

the correct one.

COPY OF SAFETY DECAL

Forthe Stateof Massachusetts,installation

and repair must be done by a plumber or

gasﬁtter licensed in the Commonwealth of

Massachusetts.

For the State of Massachusetts, ﬂexible

connectors shall not exceed 36 inches in

length.

For the State of Massachusetts, the appli-

ances individual manual shut-off must be a

t-handle type valve.

The State of Massachusetts requires the

installation of a carbon monoxide alarm in

accordancewithNFPA720 andaCO alarm

withbatterybackupinthesameroomwhere

the gas appliance is installed.

DO NOT REMOVE THIS LABEL /

NE PAS ENLEVER CETTE ÉTIQUETTE

344

DOOR SEAL: Please

check that the door is

properly sealed

FPI Fireplace Products International Ltd. Delta, BC, Canada

Minimum Clearances to Combustibles /

Degagement Minimum De Materiaux Combustibles

Serial No./ No de serie

918-762a

MAY BE INSTALLED IN MANUFACTURED (MOBILE) HOMES AFTER FIRST SALE.

Listed:

Certified for/Certifi e pour:

Tested to:

4001172

VENTED GAS FIREPLACE HEATER/

CANADA and U.S.A.

FOYER AU GAZ À ÉVACUATION

CAN/CGA-2.17-M91,ANSI Z21.88a-2007/CSA 2.33a-2007

Electrical supply / 115VAC, 1.13 A, 60Hz.

NOT FOR USE WITH SOLID FUELS .

Électrique /

NE PAS UTILISER AVEC DU COMBUSTIBLE SOLIDE

Made in Canada/ Fabrique au Canada

Duplicate S/N

0" Clearance to

combustibles from:

Mantel Clearances from

Fireplace Opening:

Side Wall Clearance

from Fireplace Opening

Ceiling from Top of

Fireplace Opening:

Mantel Depth:

Alcove Clearances:

Minimum Vent Clearances:

Top, sides, bottom and rear of unit

(A) Min. 6-1/2”" (165mm)

B) Min. 12” (305mm)

C) 36-3/4” (933mm)

D) Max. 12” (304mm)

F) Max. Depth 36" (914mm)

Vertical Vent 1-1/2" (38mm)

(on one side)

E) Min. Width 60" (1524mm),

Horizontal Top 2" (51mm)

Horizontal Side 1-1/2" (38mm)

Horizontal Bottom 1-1/2" (38mm)

(See Instruction Manual for

detailed instructions)

ÉÉ é

QUIP A L'UISINE POUR GAZ PROPANE

CONCU POUR ETRE POELE: Mod le B36X-LP

PROPANE GAS: Model B36X-LP

Minimum supply pressure

Manifold pressure high

Manifold pressure low

Orifice size

Minimum input

Maximum input

Altitude

NATURAL GAS: Model B36X-NG

APPAREIL FONCTIONNANT AU NATURAL GAS

CONCU POUR ETRE POELE: Mod le B36X-NG

Pression d'allimentation minimum

Pression à la tubulure d' chappement lev e

Pression à la tubulure d' chappement basse

Grandeur de l'injecteur

D bit minimum selon

D bit maximum selon

l'altitude

Calorifique

ééé

5.0" (1.25 kPa)

3.5" (0.87 kPa)

1.6" (0.40 kPa)

#45 DMS

0-4500 ft/pi (0-1372 m)

WC/C.E.

12,500 Btu/h (3.66 kW)

18,500 Btu/h (5.42 kW)

Pression d'allimentation minimum

Pression à la tubulure d' chappement lev e

Pression à la tubulure d' chappement basse

Grandeur de l'injecteur

D bit minimum selon

D bit maximum selon

l'altitude

Calorifique

ééé

11" (2.74 kPa)

10" (2..49 kPa)

6.4" (1.60 kPa)

#55 DMS

0-4500 ft/pi (0-1372 m)

WC/C.E.

14,500 Btu/h (4.25 kW)

17,500 Btu/h (5.13 kW)

Minimum supply pressure

Manifold pressure high

Manifold pressure low

Orifice size

Minimum input

Maximum input

Altitude

This appliance must be installed in accordance with local codes, if any; if none, follow the National Fuel Gas Code, ANSI Z223.1, or Natural Gas and Propane Installation Code, CSA B149.1.

This appliance must be installed in accordance with the Standard CAN/CSAZ240 MH, Mobile Housing, in Canada, or with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280, in the

United States, or when such a standard is not applicable,ANSI/NCSBCS A225.1/NFPA 501A, Manufactured Home Installations Standard orANSI A119.2 ou NFPA501C Standard for Recreational Vehicles

This appliance is only for use with the type of gas indicated on the rating plate and may be installed in an aftermarket, permanently located, manufactured (mobile) home where not prohibited by local codes. See

owner's manual for details. This appliance is not convertible for use with other gases, unless a certified kit is used. (Kit #556-969). Certified for use with Heatwave Kit (946-556).

Fan Part # 576-917

Installer l'appareil selon les codes ou règlements locaux, ou, en l'absence de tels règlements, selon les codes d'installationANSI Z223.1, National Fuel Gas Code ou CSA-B149.1 en vigueur.

Installer l'appareil selon la norme CAN/CSA-Z240, Série MM, Maison mobiles ou CAN/CSA-Z240 VC, Véhicules de camping, ou la norme 24 CFR Part 3280, Manufactured Home Construction and Safety

Standard. Si ces normes ne sont pas pertinentes, utilisez la norme ANSI/NCSBCS A225.1/NFPA 501A, Manufactured Home Installations Standard, ou ANSI A119.2 ou NFPA 501C Standard for Recreational

Vehicles.

This vented gas fireplace heater is not for use with air filters. Ne pas utiliser de filtre à air avec ce foyer au gaz à évacuation.

FOR USE WITH GLASS DOORS CERTIFIED WITH THE APPLIANCE ONLY

Cet appareil doit être utilize uniquement avec le type de gaz indiqué sur la plaque signalétique. Cet appareil peut être installé dans une maison préfabriquée ou mobile (É.-U. seulement) installée à demeure si les

règlements locaux le permettent. Voir la notice de l'utilisateur pour plus de renseignements. Cet appareil ne peut pas être utilisé avec d'autres gaz sauf si une trousse de conversion certifiée est fournie.

POUR UTILISATION UNIQUEMENT AVEC LES PORTES EN VERRE CERTIFIÉES AVEC L'APPAREIL

6Regency Bellavista™ B36X Gas Fireplace

REQUIREMENTS

5.08: Modifications to NFPA-54, Chapter 10

(2) Revise 10.8.3 by adding the following additional requirements:

(a) For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or in part for

residential purposes, including those owned or operated by the Commonwealth and where the side wall exhaust vent termination is less than

seven (7) feet above finished grade in the area of the venting, including but not limited to decks and porches, the following requirements shall

be satisfied:

1. INSTALLATION OF CARBON MONOXIDE DETECTORS. At the time of installation of the side wall horizontal vented gas fueled

equipment, the installing plumber or gasfitter shall observe that a hard wired carbon monoxide detector with an alarm and battery back-up is

installed on the floor level where the gas equipment is to be installed. In addition, the installing plumber or gasfitter shall observe that a battery

operated or hard wired carbon monoxide detector with an alarm is installed on each additional level of the dwelling, building or structure

served by the side wall horizontal vented gas fueled equipment. It shall be the responsibility of the property owner to secure the services of

qualified licensed professionals for the installation of hard wired carbon monoxide detectors

a. In the event that the side wall horizontally vented gas fueled equipment is installed in a crawl space or an attic, the hard wired carbon

monoxide detector with alarm and battery back-up may be installed on the next adjacent floor level.

b. In the event that the requirements of this subdivision can not be met at the time of completion of installation, the owner shall have a period of

thirty (30) days to comply with the above requirements; provided, however, that during said thirty (30) day period, a battery operated carbon

monoxide detector with an alarm shall be installed.

2. APPROVED CARBON MONOXIDE DETECTORS. Each carbon monoxide detector as required in accordance with the above provisions

shall comply with NFPA 720 and be ANSI/UL 2034 listed and IAS certified.

3. SIGNAGE. A metal or plastic identification plate shall be permanently mounted to the exterior of the building at a minimum height of eight

(8) feet above grade directly in line with the exhaust vent terminal for the horizontally vented gas fueled heating appliance or equipment. The

sign shall read, in print size no less than one-half (1/2) inch in size, "GAS VENT DIRECTLY BELOW. KEEP CLEAR OF ALL

OBSTRUCTIONS".

4. INSPECTION. The state or local gas inspector of the side wall horizontally vented gas fueled equipment shall not approve the installation

unless, upon inspection, the inspector observes carbon monoxide detectors and signage installed in accordance with the provisions of 248 CMR

5.08(2)(a)1 through 4.

(b) EXEMPTIONS: The following equipment is exempt from 248 CMR 5.08(2)(a)1 through 4:

1. The equipment listed in Chapter 10 entitled "Equipment Not Required To Be Vented" in the most current edition of NFPA 54 as adopted by

the Board; and

2. Product Approved side wall horizontally vented gas fueled equipment installed in a room or structure separate from the dwelling, building or

structure used in whole or in part for residential purposes.

Approved side wall horizontally vented gas equipment provides a venting system design or venting system components with the equipment, the

instructions provided by the manufacturer for installation of the equipment and the venting system shall include:

1. Detailed instructions for the installation of the venting system design or the venting system components; and

2. A complete parts list for the venting system design or venting system.

(d) MANUFACTURER REQUIREMENTS - GAS EQUIPMENT VENTING SYSTEM NOT PROVIDED. When the manufacturer of a

Product Approved side wall horizontally vented gas fueled equipment does not provide the parts for venting the flue gases, but identifies

"special venting systems", the following requirements shall be satisfied by the manufacturer:

1. The referenced "special venting system" instructions shall be included with the appliance or equipment installation instructions; and

2. The "special venting systems" shall be Product Approved by the Board, and the instructions for that system shall include a parts list and

detailed installation instructions.

(e) A copy of all installation instructions for all Product Approved side wall horizontally vented gas fueled equipment, all venting instructions,

all parts lists for venting instructions, and/or all venting design instructions shall remain with the appliance or equipment at the completion of

the installation.

MA Code - CO Detector

(for the State of Massachusetts only)

Regency Bellavista™ B36X Gas Fireplace 7

UNIT DIMENSIONS

37-1/2” (953mm)

21”(533mm)

33” (838mm)

36” (914mm)

35-1/4”

(895mm)

30-3/8” (762mm)

1”(25.4mm)

39-1/16”

(992mm)

35-1/4” (895mm)

26-1/2” (673mm)

20-1/4” (514mm)

17-5/16” (440mm)

33-1/16” (840mm)

19-5/16” (490mm)

37-13/16” (960mm)

35-5/16” (897mm)

39” (991mm)

Full Screen Doors

DIMENSIONS

Regency Bellavista™ B36X Gas Fireplace

8Regency Bellavista™ B36X Gas Fireplace

INSTALLATION

11) Under no circumstance should this

appliance be modified. Parts that have

to be removed for servicing should be

replaced prior to operating this appliance.

12) Installation and any repairs to this

appliance should be done by a qualiﬁed service

person.A professional service person should be

called to inspect this appliance annually. Make

it a practice to have all of your gas appliances

checked annually.

13) Do not slam shut or strike the glass door.

14) Under no circumstances should any solid fuels

(wood, paper, cardboard, coal, etc.) be used in

this appliance.

15) The appliance area must be kept clear and

free of combustible materials, (gases and other

ﬂammable vapours and liquids).

Emissions from burning wood or gas could

contain chemicals known to the State of

California to cause cancer, birth defects or

other reproductive harm.

IMPORTANT MESSAGE

SAVE THESE

INSTRUCTIONS

The Gas Fireplace must be installed in accordance

with these instructions. Carefully read all the

instructions in this manual ﬁrst.Consult the "authority

having jurisdiction" to determine the need for a

permit prior to starting the installation. It is the

responsibility of the installer to ensure this ﬁreplace

is installed in compliance with manufacturers

instructions and all applicable codes.

BEFORE YOU START

Safe installation and operation of this appliance

requires common sense, however, we are required

by the Canadian Safety Standards and ANSI

Standards to make you aware of the following:

CLOTHING OR OTHER FLAMMABLE

MATERIAL SHOULD NOT BE PLACED

ON OR NEAR THE APPLIANCE.

CHILDREN AND ADULTS SHOULD BE

ALERTED TO THE HAZARDS OF HIGH

SURFACE TEMPERATURES, ESPE-

CIALLY THE FIREPLACE GLASS, AND

SHOULD STAY AWAYTO AVOID BURNS

OR CLOTHING IGNITION.

GENERAL SAFETY

INFORMATION

1) The appliance installation must conform with

local codes or, in the absence of local codes, with

the current Canadian or National Gas Codes,

CAN1-B149 or ANSI Z223.1 Installation Codes.

2) The appliance when installed, must be

electrically grounded in accordance with local

codes, or in the absence of local codes with the

current National Electrical Code, ANSI/NFPA 70

or CSA C22.1 Canadian Electrical Code.

3) See general construction and assembly

instructions. The appliance and vent should be

enclosed.

4) This appliance must be connected to the

speciﬁed vent and termination cap to the outside

of the building envelope. Never vent to another

room or inside a building. Make sure that the

vent is ﬁtted as per Venting instructions.

5) Inspect the venting system annually for blockage

and any signs of deterioration.

6) Venting terminals shall not be recessed into a

wall or siding.

7) Any safety glass removed for servicing must be

replaced prior to operating the appliance.

8) To prevent injury, do not allow anyone who is

unfamiliar with the operation to use the ﬁreplace.

9) Wear gloves and safety glasses for protection

while doing required maintenance.

10) Be aware of electrical wiring locations in walls

and ceilings when cutting holes for termination.

INSTALLATION AND REPAIR SHOULD

BE DONE BY AN AUTHORIZED

SERVICE PERSON. THE APPLIANCE

SHOULD BE INSPECTED BEFORE

USE AND AT LEAST ANNUALLY BY A

PROFESSIONAL SERVICE PERSON.

MORE FREQUENT CLEANING MAY

BE REQUIRED DUE TO EXCESSIVE

LINT FROM CARPETING, BEDDING

MATERIAL, ETC.IT IS IMPERATIVETHAT

CONTROL COMPARTMENTS,BURNERS

AND CIRCULATING AIR PASSAGEWAYS

OF THE APPLIANCE BE KEPT CLEAN.

DUE TO HIGH TEMPERATURES, THE

APPLIANCE SHOULD BE LOCATED

OUT OF TRAFFIC AND AWAY FROM

FURNITURE AND DRAPERIES.

WARNING: FAILURE TO INSTALL THIS

APPLIANCE CORRECTLY WILL VOID

YOUR WARRANTY AND MAY CAUSE A

SERIOUS HOUSE FIRE.

YOUNG CHILDREN SHOULD BE CARE-

FULLY SUPERVISED WHEN THEY ARE

IN THE SAME AREA AS THE APPLI-

ANCE. TODDLERS,YOUNG CHILDREN

AND OTHERS MAY BE SUSCEPTIBLE

TO ACCIDENTAL CONTACT BURNS. A

PHYSICAL BARRIERS IS RECOMMEND-

ED IFTHERE ARE AT RISK INDIVIDUAL

INTHE HOUSE. TO RESTRICT ACCESS

TO A FIREPLACE OR STOVE, INSTALL

AN ADJUSTABLE SAFETY GATE TO

KEEP TODDLERS, YOUNG CHILDREN

AND OTHER AT RISK INDIVIDUALS OUT

OF THE ROOM AND AWAY FROM HOT

SURFACES.

Regency Bellavista™ B36X Gas Fireplace 9

INSTALLATION

This includes:

1) Clocking the appliance to ensure the correct

ﬁring rate (rate noted on label) after burning

appliance for 15 minutes.

2) If required, adjusting the primary air to ensure

that the ﬂame does not carbon. First allow the

unit to burn for 15-20 min. to stabilize.

CAUTION: Any alteration to the product that

causessootingorcarboningthatresultsindam-

ageisnottheresponsibilityofthemanufacturer.

LOCATING YOUR

GAS FIREPLACE

B) Flat on Wall Corner

C) Recessed into Wall/Alcove

D) Corner

Diagram 1

1) When selecting a location for your ﬁreplace,

ensure that the clearances are met.

2) Theappliance must beinstalled on aﬂat, solid,

continuoussurfaceForexampleawood,metal

or concrete ﬂoor or in a raised (on the wall) ap-

plication. The appliance must be installed on

a metal or wood panel extending the full width

and depth of the appliance.

3) The B36X Bellavista™ Gas Fireplace can be

installed in a recessed position or framed out

intothe roomas inA,B, Cand D.See Diagram

A) Flat on Wall

INSTALLATION

CHECKLIST

1) Locate appliance

a) Roomlocation(Referto"LocatingYourGas

ﬁreplace" section)

b) Clearances to Combustibles (Refer to

"Clearances" section)

c) MantelClearances(Refer to"Combustible

Mantel Clearances" section)

d) Framing & Finishing Requirements (Refer

to "Framing & Finishing" section)

e) Venting Requirements (Refer to "Venting"

section)

2) Assemble Top Standoffs and Top Facing

Support and Side Nailing Strips (Refer to "Unit

AssemblyPriortoInstallation"Section). NOTE:

Must be done before installing unit into place.

3) Install vent (Refer to "Venting" sections).

4) Make gas and electrical connections. Test the

pilot. Must be as per diagram (Refer to "Pilot

Adjustment " section).

Convert to propane if desired (Refer to "Gas

Line Installation" and "Conversion Kit from NG

to LPG" sections).

5) Install standard and optional features. Refer

to the following sections:

a. LP Conversion Kit (Optional)

b. Brick Panels (Optional)

c. Log Set Installation

d. Standard Flush Door

e. Full Screen Door (Optional)

f. Flush Panel/Louver (Optional)

g. Remote control,Wall Switch or

Thermostat (Optional)

h. Fan Installation (Optional)

6) Final check.

4) ThisapplianceisListedforbedroom installations

usingthestandardRemote(millivoltthermostat

system). Some areas may have further

requirements, check local codes before

installation.

5) The B36X Gas Fireplace are approved for

alcove installations, see "Clearances" section

for details.

6) We recommendthatyouplanyourinstallationon

paperusingexactmeasurementsforclearances

and ﬂoor protection before actually installing

this appliance. Have an authorized inspector,

dealer, or installer review your plans before

installation.

Note: For vent terminations refer to "Exterior

Vent Termination Locations" section.

HEATWAVE

DUCT SYSTEM

(OPTIONAL)

#946-556

The HeatWave Air Duct Kit increases the

effectivenessofyourﬁreplacebydispersingwarm

air from the ﬁreplace to remote locations in the

same room or other rooms in your home.

Up to two kits may be installed on the ﬁreplace.

Please Note: Only 1 HeatWave kit may be oper-

atedatone time.This includestheinternal blower

option as well.

10 Regency Bellavista™ B36X Gas Fireplace

INSTALLATION

Caution Requirements

The top, back and sides of the ﬁreplace are deﬁned by

standoffs. The metal ends of the standoff may NOT be

recessed into combustible construction.

WARNING

Fire hazard is an extreme risk

if these clearances (air space) to combustible materials are not

adhered to. It is of greatest importance that this ﬁreplace and vent

system be installed only in accordance with these instructions.

CLEARANCES

The clearances listed below are Minimum distances unless otherwise stated:

Amajor cause ofchimney related ﬁresis failure tomaintain required clearances(air space) tocombustible materials. Itis of thegreatest importance

that this ﬁreplace and vent system be installed only in accordance with these instructions.

B36X Clearance Requirements Minimum Vent Clearances

to Combustibles

Clearance: Dimension Measured From:

A: Mantel Height (min.) 6-1/2" (165mm) Top of Fireplace Opening

B: Sidewall 12" (304mm) on one side Side of Fireplace Opening

C: Ceiling 36-3/4" (933mm) Top of Fireplace Opening

D: Mantel Depth 12" (304mm) 14-1/2 " (368mm) from

Top of Fireplace Opening

E: Alcove Width 84" (2134mm) Sidewall to Sidewall (Minimum)

F: Alcove Depth 36" (914mm) Front to Back Wall (Maximum)

Notes: 0" No Hearth Required

Horizontal Top 2" (51mm)

Horizontal Side 1-1/2 " (38mm)

Horizontal Bottom 1-1/2" (38mm)

Vertical Vent 1-1/2" (38mm)

Other manuals for Bellavista B36X

Table of contents

Other Regency Indoor Fireplace manuals

Regency

Regency CB40EPV Series User manual

Regency

Regency Horizon HZ40E Service manual

Regency

Regency F250B Quick start guide

Regency

Regency FPI FP90 Quick start guide

Regency

Regency GFI300LNG-R User manual

Regency

Regency City Series San Franciso Bay 50 User manual

Regency

Regency Classic i2450 User manual

Regency

Regency Classic F1150 User manual

Regency

Regency HZ33CE-NG Quick start guide

Regency

Regency classic i2400m Service manual

Regency

Regency Gem54 Quick start guide

Regency

Regency Z30DVT-LP User manual

Regency

Regency HZ33CE-NG10 Quick start guide

Regency

Regency MANSFIELD L850B ST Quick start guide

Regency

Regency Sunrise E33S-NG1 Quick start guide

Regency

Regency GF900L-NG Quick start guide

Regency

Regency H2100 User manual

Regency

Regency GF900L-NG Quick start guide

Regency

Regency Greenfire GF1500L NG-2 User manual

Regency

Regency Cardinia F150B-1 Quick start guide

Regency

Regency Grandview G800EC Series User manual

Regency

Regency P121-NG10 Quick start guide

Regency

Regency HZ54E-NG10 Quick start guide

Regency

Regency H2105 Service manual

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual